• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.2
• /
• pp.104-111
• /
• 2010

To promote environmentally responsible architectural practice, many nations have established their own Green Building Certification system. Until 2007, 138 Education facilities acquired certification but many people don't fully understand each item of Green building Certification Criteria yet. The purpose of this study is to analyze 40 certified Education facilities and to find the reasons why they had acquired low scores and high scores. These scores lead us to propose a way that each contents the efficient approaches and alternative visions of Education facilities. Because the part of material and resource is initial of the projects, this study focuses on it and aims to pick out the items requiring improvement for the Education facilities. We expect to be helpful for the next design works through result of this thorough study.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.15-22
• /
• 2008

Recently loess are used as design and construction materials in some construction sites. However, many problems have come to the fore because the loess was considered merely as ordinary soil, not taking the engineering characteristics of loess into account at all. The purpose of this study is to effectively mix and use the oyster shell-which is the byproduct of oyster farming in the clean and pure water zone of Southwestern region-with loess in a bid to increase the utility, considering that loess itself has the limit for civil engineering purpose, and research the usability of oyster shell as an alternative material for construction.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.175-180
• /
• 2016

Nondestructive evaluation for material health monitoring is important in aerospace industries. Composite laminates are exposed to heat cyclic loading and humid environment depending on flight conditions. Cyclic heat loading and moisture absorption may lead to material degradation such as matrix breaking, debonding, and delamination. In this paper, the moisture absorption ratio was investigated by measuring the Lamb wave velocity. The composite laminates were manufactured and subjected to different thermal aging cycles and moisture absorption. For various conditions of these cycles, not only changes in weight and also ultrasonic wave velocity were measured, and the Lamb wave velocity at various levels of moisture on a carbon-epoxy plate was investigated. Results from the experiment show a linear correlation between moisture absorption ratio and Lamb wave velocity at different thermal fatigue stages. The presented method can be applied as an alternative solution in the online monitoring of composite laminate moisture levels in commercial flights.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.33
• /
• pp.45-53
• /
• 1995

The Purpose of this paper is to describe and demonstrate a quantitative procedure for evaluating alternative material handling systems that are being considered for possible purchase. The procedure considers both quantitative factors(i.e. costs) and qualitative factors(i.e. equipment productivity) that should be considered in the evaluation process. Since these factors are not always quantifiable it is necessary that the procedure be able to quantify all factors in commensurable units. This is accomplished via a modification of the Brown and Gibson model for facility site location and selection. The model was demonstrated via a case example that encompassed the derivation of performance measures for three material handling systems.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.4
• /
• pp.302-306
• /
• 2019

We investigated a solution-derived $Y_2O_3$ film treated by ion beam (IB) irradiation as a liquid crystal (LC) alignment layer. With IB irradiation, homogeneous LC alignment was achieved irrespective of the annealing temperature. To verify the effect of IB irradiation, we conducted surface analyses such as X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). As $Y_2O_3$ is a high-k material, the electro-optical properties of the twisted nematic (TN) cells were superior to those of conventional TN cells based on a rubbed polymer, with an LC rising time of 4.1ms and falling time of 2.9ms. The IB-irradiated $Y_2O_3$ is a good alternative as an alignment layer for fast-switching TN LC displays.

• Journal for History of Mathematics
• /
• v.32 no.1
• /
• pp.17-25
• /
• 2019

This essay elucidates the way the geometries of space-time theories explain material bodies' motions. A conventional attempt to interpret the way that space-time geometry explains is to consider the geometrical structure of space-time as involving a causally efficient entity that directs material bodies to follow their trajectories corresponding to the laws of motion. Newtonian substantival space is interpreted as an entity that acts but is not acted on by the motions of material bodies. And Einstein's curved space-time is interpreted as an entity that causes the motions of bodies. This essay argues against this line of thought and provides an alternative understanding of the way space-time geometry explain the laws of motion. The workings of the way that Newton's flat and Einstein's curved space-time explains the law of motion is such that space-time geometry encodes the principle of inertia which specifies straight lines of moving bodies.

• Cement Symposium
• /
• s.49
• /
• pp.25-26
• /
• 2022

Coal ash generated from thermal power plants has been used as alternative raw material for cement production. But when using buried coal ash, careful attention is needed because it contains some amount of moisture and chlorides which can cause problems in production process. In this project, cement production process and quality control technology for using buried coal ash as cement raw material has been being developed.

• Journal of Technologic Dentistry
• /
• v.46 no.1
• /
• pp.15-19
• /
• 2024

An ideal post material should have physical properties similar to those of dentin. Post materials with high elastic moduli may cause root fractures. This clinical report describes the treatment of a severely damaged tooth using a recently introduced material. Polyetherketoneketone (PEKK) is a semicrystalline high-performance thermoplastic polymer. PEKK is a promising material for custom post-and-core fabrication because of its elasticity close to that of dentin, good shock absorbance, machinability, and low cost. A laboratory scanner was used to digitize the conventional impression of a severely damaged maxillary right first molar. A custom PEKK post-and-core was designed and milled using computer-aided design and computer-aided manufacturing technology. Using the proposed technique, a custom PEKK post-and-core was fabricated accurately and human error was reduced. Restoration was luted with resin cement. Custom PEKK post-and-core restorations are a viable alternative for treating severely damaged teeth.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.443-446
• /
• 2009

In this study, a series of degradation test for structural adhesives was performed to investigate the possibility of replacement of the alternative adhesives to the conventional adhesives. Four types of the adhesives were exposed to combined environmental conditions over 1000 hours at an accelerated aging tester, which can simulate natural weather conditions such temperature, moisture and ultraviolet. Mechanical and chemical properties of the adhesives were evaluated through material testing system and FT/IR spectrometer. According to the results, the conventional adhesives can be replaced by the alternative adhesives because the alternative adhesives were more stable to environmental conditions rather than the conventional adhesives.

• Clean Technology
• /
• v.14 no.2
• /
• pp.144-151
• /
• 2008

Life cycle assessment was carried out to evaluate the environmental values of dimethylas a diesel alternative fuel with the assumption of dimethyl ether production from natural gas via synthesis gas. The whole life cycles from raw material acquisitions to the final usages of diesel and dimethyl ether were involved in the assessment. Inventory analysis showed that the most significant environmental impacts came from resource depletions and air emissions. Impact assessment revealed that dimethyl ether was environmentally better in the aspect of human health and ecosystem quality but worse in resource depletions compared with diesel fuel. Suggestions for environmental improvement of dimethyl ether as a diesel alternative fuel were prepared based on the assessment results.