• Steel and Composite Structures
• /
• 제30권6호
• /
• pp.567-576
• /
• 2019

Time-dependent creep analysis of a rotating functionally graded cantilever beam with trapezoidal longitudinal cross section subjected to thermal and inertia loading is investigated using first-order shear deformation theory (FSDT). The model described in this paper is a simple simulation of a turbine blade working under creep condition. The material is a metal based composite reinforced by a ceramic where the creep properties of which has been described by the Sherby's constitutive model. All mechanical and thermal properties except Poisson's ratio are assumed to be variable longitudinally based on the volume fraction of constituent. The principle of virtual work as well as first order shear deformation theory is used to derive governing equations. Longitudinal distribution of displacements and stresses are investigated for various volume fractions of reinforcement. Method of successive elastic solution is employed to obtain history of stresses and creep deformations. It is found that stresses and displacements approach their steady state values after 40000 hours. The results presented in this paper can be used for selection of appropriate longitudinal distribution of reinforcement to achieve the desired stresses and displacements.

• Nuclear Engineering and Technology
• /
• 제15권2호
• /
• pp.160-168
• /
• 1983

About 25 years ago, halfway along the recorded history of the neutron as a separate entity, Korea entered the nuclear age and initiated its own neutron research and development programs. Since that time Korean scientists have taken all possible advantages of the special opportunities offered by the neutron. Scientists the world over, in the Far East, hear East, and the West, have adapted these opportunities to their special needs. These needs are manifested in all phases of modern life, including power generation by nuclear means, food preservation, production of new types of food-bearing plants, commercial uses of activation analysis, irradiations, and isotope production, nuclear medicine, industrial quality control through nuclear measurements, and direct use of neutrons in research in many areas including solid state physics, chemistry, physics, biology, and medicine. Research with neutrons has been successfully conducted using nuclear research reactors of all sizes ranging from the very small (∼10 kilowatts) to the very large(50-100 Megawatts). This speaker has teen associated with nuclear research since 1945 and directly with neutron research since 1957. From this continuous research and development activity, he will report on some of the prospects in the second 50 years of the neutron.

• Journal of Microbiology and Biotechnology
• /
• 제23권7호
• /
• pp.1004-1014
• /
• 2013

Six nonpathogenic fungal strains isolated from alkaline soils of Buenos Aires Province, Argentina (Acremonium murorum, Aspergillus sidowii, Cladosporium cladosporoides, Neurospora tetrasperma, Purpureocillium lilacinum (formerly Paecilomyces lilacinus), and Westerdikella dispersa) were tested for their ability to produce keratinolytic enzymes. Strains were grown on feather meal agar as well as in solid-state and submerged cultures, using a basal mineral medium and "hair waste" as sole sources of carbon and nitrogen. All the tested fungi grew on feather meal agar, but only three of them were capable of hydrolyzing keratin, producing clear zones. Among these strains, P. lilacinum produced the highest proteolytic and keratinolytic activities, both in solid-state and submerged fermentations. The medium composition and culture conditions for the keratinases production by P. lilacinum were optimized. Addition of glucose (5 g/l) and yeast extract (2.23 g/l) to the basal hair medium increased keratinases production. The optimum temperature and initial pH for the enzyme production were $28^{\circ}C$ and 6.0, respectively. A beneficial effect was observed when the original concentration of four metal ions, present in the basal mineral medium, was reduced up to 1:10. The maximum yield of the enzyme was 15.96 $U_c/ml$ in the optimal hair medium; this value was about 6.5-fold higher than the yield in the basal hair medium. These results suggest that keratinases from P. lilacinum can be useful for biotechnological purposes such as biodegradation (or bioconversion) of hair waste, leading to a reduction of the environmental pollution caused by leather technology with the concomitant production of proteolytic enzymes and protein hydrolyzates.

• 한국전기전자재료학회논문지
• /
• 제30권6호
• /
• pp.361-365
• /
• 2017

In this paper, we investigated the effect of Co content on the microstructural and electrical properties of $Ni_{0.79}Mn_{2.21-x}Co_xO_4$ (x=0 to 0.25) specimens. Solid-state reaction was used to prepare the bulk specimens. XRD (X-ray diffraction) patterns showed that all compositions had a cubic spinel phase. As a result of the microstructural properties, FE-SEM(field-emission scanning electron microscopy) analysis showed a dense structure, and the mean grain size increased from $5.24{\mu}m$ to $7.33{\mu}m$ with an increase of Co content from x=0 to 0.25. All specimens exhibited the typical NTC thermistor characteristics as the electrical resistance exponentially decreased with increasing temperature. The resistivity and the B-value of $Ni_{0.79}Mn_{1.96}Co_{0.25}O_4$ were $2959{\Omega}{\cdot}cm$ and 3719, respectively.

• 전기화학회지
• /
• 제8권4호
• /
• pp.181-185
• /
• 2005

알루미나 기판을 사용하여 백금 박막 전류 집전체상에 $2.9{\mu}m$ 두께 및 $4cm^2$의 전극면적을 갖는 $LiCoO_2$ 박막을 R.F. 마그네트론 스퍼터링법에 의해 증착하였으며, 아르곤 공정 압력 및 인가된 R.F. 전력량에 따른 Li/Co 몰 비 의존성에 대해 고찰하였다. 비정질계 고체전해질인 Lipon 및 Li 음극이 순차적으로 증착된 박막전지를 제조하여 정전류충, 방전 시험하였으며, 고율방전 특성 및 충, 방전 횟수에 따른 전지 용량 변화를 측정하였다. 교류임피던스를 통해 전지내부의 저항성분을 측정하였으며, 이에 대한 등가회로를 구성하여 시뮬레이션한 결과와 비교하였다.

• 한국진공학회지
• /
• 제21권2호
• /
• pp.93-98
• /
• 2012

고상 반응법을 사용하여 $Sm^{3+}$ 이온의 함량비를 변화시키면서 $Gd_{1-x}VO_4:{Eu_x}^{3+}$ 형광체 분말을 합성하였다. 모든 형광체 시료의 결정 구조는 $24.76^{\circ}$에 중심을 갖는 (200) 주 회절 피크로 구성되는 정방정계이었으며, 결정 입자의 형상은 $Sm^{3+}$ 이온의 함량비가 0.05 mol일 때 구형에 근접하고 균일한 크기 분포를 나타내었다. 발광 특성의 경우에, $Sm^{3+}$ 이온의 함량비에 관계없이 모든 형광체 분말은 파장 565, 603, 645 nm에 피크를 갖는 각각 황색, 주황색, 적색 형광을 보였다. $Sm^{3+}$ 이온의 함량비가 증가함에 따라 흡수 스펙트럼의 세기는 감소하는 경향을 나타내었으며, $Sm^{3+}$ 이온의 함량비가 0.05 mol일 때 최대 흡수와 발광 스펙트럼이 관측되었고, 대칭비의 값은 1.19이었다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.261-264
• /
• 2017

$Ni_{0.79}Co_{0.15-x}Cu_xMn_{2.06}O_4$ ($0{\leq}x{\leq}0.09$) thick films were fabricated using the conventional solid-state reaction method and screen-printing method. Structural and electrical properties of specimens based on the amount of Cu were observed in order to investigate their applicability in the infrared detector. All specimens showed a single spinel phase with a homogeneous cubic structure. As the amount of Cu increased, the average grain size increased and was found to be approximately $5.01{\mu}m$ for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen. The thickness of all specimens was approximately $55{\sim}56{\mu}m$. As Cu content increased, the resistivity and TCR properties at room temperature decreased, and these values for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen were $502{\Omega}-cm$ and $-3.32%/^{\circ}C$, respectively. The responsivity and noise properties decreased with an increase in Cu content, with the specimen with a Cu content of x=0.09 showing 0.0183 V/W and $5.21{\times}10^{-5}V$, respectively.

• 한국재료학회지
• /
• 제22권5호
• /
• pp.215-219
• /
• 2012

Red phosphors $Ca_{1-1.5x}WO_4:{Eu_x}^{3+}$ were synthesized with different concentrations of $Eu^{3+}$ ions by using a solid-state reaction method. The crystal structure of the red phosphors was found to be a tetragonal system. X-ray diffraction (XRD) results showed the (112) main diffraction peak centered at $2{\theta}=28.71^{\circ}$, and the size of crystalline particles exhibited an overall decreasing tendency according to the concentration of $Eu^{3+}$ ions. The excitation spectra of all the phosphors were composed of a broad band centered at 275 nm in the range of 230-310 nm due to $O^{2-}{\rightarrow}W^{6+}$ and a narrow band having a peak at 307 nm caused by $O^{2-}{\rightarrow}Eu^{3+}$. Also, the excitation spectrum presents several strong lines in the range of 305-420 nm, which are assigned to the 4f-4f transitions of the $Eu^{3+}$ ion. In the case of the emission spectrum, all the phosphor powders, irrespective of $Eu^{3+}$ ion concentration, indicated an orange emission peak at 594 nm and a strong red emission spectrum centered at 615 nm, with two weak lines at 648 and 700 nm. The highest red emission intensity occurred at x = 0.10 mol of Eu3+ ion concentration with an asymmetry ratio of 12.5. Especially, the presence of $Eu^{3+}$ in the $Ca_{1-1.5x}WO_4:{Eu_x}^{3+}$ shows very effective use of excitation energy in the range of 305-420 nm, and finally yields a strong emission of red light.

• 한국진공학회지
• /
• 제20권6호
• /
• pp.430-435
• /
• 2011

고상 반응법을 사용하여 $Eu^{3+}$ 이온의 함량비를 변화시키면서 $Y_{1-x}PO_4:{Eu_x}^{3+}$ 적색 형광체를 합성하였다. 모든 적색 형광체의 결정 구조는 $25.88^{\circ}$에 중심을 갖는 (200) 주 회절 피크로 구성되는 정방정계이었으며, 결정 입자의 형상은 $Eu^{3+}$ 이온의 함량비가 증가함에 따라 구형에 근접하고 균일한 크기 분포를 나타내었다. 형광 특성의 경우에, $Eu^{3+}$ 이온의 함량비에 관계없이 모든 세라믹은 파장 593.0과 619.2 nm에 피크를 갖는 각각 적주황색과 적색 형광을 나타내었다. $Eu^{3+}$ 이온의 함량비가 증가함에 따라 여기 스펙트럼의 파장은 약간씩 장파장 쪽으로 이동하면서 흡수 세기는 증가하는 경향을 보였으며, $Eu^{3+}$ 이온의 함량비가 0.15 mol일 때 최대 흡수 및 발광 스펙트럼이 관측되었다.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.611-616
• /
• 2011

Red-orange phosphors $Gd_{1-x}PO_4:{Eu_x}^{3+}$ (x = 0, 0.05, 0.10, 0.15, 0.20) were synthesized with changing the concentration of $Eu^{3+}$ ions using a solid-state reaction method. The crystal structures, surface morphology, and optical properties of the ceramic phosphors were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL) spectrophotometry. The XRD results were in accordance with JCPDS (32-0386), and the crystal structures of all the red-orange phosphors were found to be a monoclinic system. The SEM results showed that the size of grains increases and then decreases as the concentration of $Eu^{3+}$ ionincreases. As for the PL properties, all of the ceramic phosphors, irrespective of $Eu^{3+}$ ion concentration, had orange and red emissions peaks at 594 nm and 613 nm, respectively. The maximum excitation and emission spectra were observed at 0.10 mol of $Eu^{3+}$ ion concentration, just like the grain size. An orange color stronger than the red means that $^5D_0{\rightarrow}^7F_1$ (magnetic dipole transition) is dominant over the $^5D_0{\rightarrow}^7F_2$ (electric dipole transition), and $Eu^{3+}$ is located at the center of the inversion symmetry. These properties contrasted with those of a red phosphor $Y_{1-x}PO_4:{Eu_x}^{3+}$, which has a tetragonal system. Therefore, we confirm that the crystal structure of the host material has a major effect on the resulting color.