• 펄프종이기술
• /
• 제33권3호
• /
• pp.37-43
• /
• 2001

The bleach efficiency between PY and YP bleaching of pulps, which were deinked in neutral (cellulase) and alkaline (NaOH, NaOH/${Na_2}{SiO_3}$) ranges, and were treated on kneader, was compared in this study. The brightness of pulps (84.8~88.4% ISO) which were deinked in alkaline or neutral ranges increased up to 88.4%~88.8% ISO after PY or YP bleaching. There was no difference in the brightness between PY and YP bleaching. And the dirt count of bleached pulps was similar each other at the range of 17~38 ppm. The tensile index of bleached pulps was slightly higher in PY bleaching than those in YP bleaching. While with the treatment of kneading, the brightness and dirt count decreased remarkably compared to those of no-kneading. However, the sharp difference in the brightnesses or in dirt count of bleached pulps decreased after bleaching. The brightness of bleached pulps at YP stages was only numberically higher than those at PY stages without regard to the treatment of kneading. Therefore, in the case of the neutral deinkiing process, the conversion of PY bleaching stages to YP bleaching stages was profitable to water loop system, and was harmless in the aspect of the bleach efficiency.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.1-7
• /
• 2000

Alkaline Sizing behavior and mechanism of handsheets, which were prepared from thermomechanical pulp (TMP) with alkylketene dimer (AKD), were studied in terms of the conditions of the handsheet-making. AKD content in the TMP handsheets was increased with increasing of AKD addition level and the addition of a polyamideamine-epichlorohydrin resin (PAE) clearly enhanced AKD retention as well as the resultant sizing performance of TMP handsheets. Although drying of the AKD sized TMP webs at $20^{\circ}C$ led to no or quite low sizing level, but TMP handsheets sized with AKD had higher sizing degrees with increasing of the temperature of heat treatment. Scanning electron microscopic observations of the AKD-sized TMP handsheets showed that AKD emulsion particles were present on pulp fiber surfaces independently without coagulation in the TMP handsheets dried at $20^{\circ}C$. Heat treatment of the AKD-sized handsheets resulted in disappearance of the AKD emulsion particles because of their melting and spreading. The addition of calcium carbonate filler to the TMP suspensions did not influence on AKD content in the TMP handsheets. Nevertheless, their sizing degrees clearly increased by the addition of $CaCO_3$filler. Probably, AKD molecules adsorbed on the $CaCO_3$filler particles contribute to the enhancement of sizing performance. Thus, AKD can give sizing features effectively to the TMP handsheets, when they are made under suitable conditions.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.459-464
• /
• 2012

We investigated cleaning effects using $NH_4OH$ solution on the surface of Cu film. A 20 nm Cu film was deposited on Ti / p-Si (100) by sputter deposition and was exposed to air for growth of the native Cu oxide. In order to remove the Cu native oxide, an $NH_4OH$ cleaning process with and without TS-40A pre-treatment was carried out. After the $NH_4OH$ cleaning without TS-40A pretreatment, the sheet resistance Rs of the Cu film and the surface morphology changed slightly(${\Delta}Rs:{\sim}10m{\Omega}/sq.$). On the other hand, after $NH_4OH$ cleaning with TS-40A pretreatment, the Rs of the Cu film changed abruptly (${\Delta}Rs:till{\sim}700m{\Omega}/sq.$); in addition, cracks showed on the surface of the Cu film. According to XPS results, Si ingredient was detected on the surface of all Cu films pretreated with TS-40A. This Si ingredient(a kind of silicate) may result from the TS-40A solution, because sodium metasilicate is included in TS-40A as an alkaline degreasing agent. Finally, we found that the $NH_4OH$ cleaning process without pretreatment using an alkaline cleanser containing a silicate ingredient is more useful at removing Cu oxides on Cu film. In addition, we found that in the $NH_4OH$ cleaning process, an alkaline cleanser like Metex TS-40A, containing sodium metasilicate, can cause cracks on the surface of Cu film.

• 공업화학
• /
• 제22권3호
• /
• pp.336-339
• /
• 2011

해조류는 잠재력이 있는 풍부한 발효기질이다. 해조류의 효소가수분해를 상업용 셀룰라아제 및 비스코자임과 함께 알칼리 과산화수소 전처리에 의해서 검토하였다. 본 연구에서 사용된 해조류는 구멍갈파래이며, 전처리 평가는 효소가수분해 후 얻어진 글루코오스의 수율로 나타내었다. 알칼리 과산화수소는 과산화수소 1 wt%에 수산화나트륨을 1~1.75 wt% 범위로 혼합하였다. $60^{\circ}C$에서 3 h 동안 전처리한 결과 5 wt% 과산화수소를 사용했을 때에 가장 높은 글루코오스 전환율을 보였다. 알칼리 과산화수소로 전처리한 후 필요한 효소의 양은 전처리하지 않은 구멍갈파래에 비하여 상당히 절감되었으며, 아울러 효소 가수분해동안 얻어진 글루코오스의 양은 증가되었다.

• Journal of Electrochemical Science and Technology
• /
• 제13권2호
• /
• pp.213-226
• /
• 2022

In the present study, the corrosion behavior of aluminum Al-7075 tempered (T-6 condition) alloy was evaluated by immersion testing and electrochemical testing in 1.75% and 3.5% NaCl environment at acidic, neutral and basic pH. The data obtained by both immersion tests and electrochemical corrosion tests (potentiodynamic polarization and electrochemical impedance spectroscopy tests) present that the corrosion rate of the alloy specimens is minimum for the pH=7 condition of the solution due to the formation of dense and well adherent thin protective oxide layer. Whereas the solutions with acidic and alkaline pH cause shift in the corrosion behavior of aluminum alloy to more active domains aggravated by the constant flux of acidic and alkaline ions (Cl^- and OH^-) in the media which anodically dissolve the Al matrix in comparison to precipitated intermetallic phases (cathodic in nature) formed due to T6 treatment. Consequently, the pitting behavior of the alloy, as observed by cyclic polarization tests, shifts to more active regions when pH of the solutions changes from neutral to alkaline environment due to localized dissolution of the matrix in alkaline environment that ingress by diffusion through the pores in the oxide film. Microscopic analysis also strengthens the results obtained by immersion corrosion testing and electrochemical corrosion testing as the study examines the corrosion behavior of this alloy under a systematic evaluation in marine environment.

• International Journal of Oral Biology
• /
• 제35권3호
• /
• pp.99-106
• /
• 2010

Luteolin is a flavonoid that exists in a glycosylated form in celery and green pepper. Flavonoids possess antioxidant and anti-inflammatory properties and can reduce the expression of key inflammatory molecules in macrophages and monocytes. It has been reported also that some flavonoids have effects on bone metabolism. The effects of luteolin on the function of osteoblasts were investigated by measuring cell viability, alkaline phosphatase activity, type I collagen production, osteoprotegerin secretion, Wnt promoter activity, BMP-2 and Runx2 expression and calcified nodule formation. Luteolin has no effects upon osteoblast viability but induced an increase in alkaline phosphatase activity, type I collagen production and a decrease in osteoprotegerin secretion in these cells. Luteolin treatment also upregulated BMP-2 mRNA expression. These results suggest that luteolin may be a regulatory molecule that facilitates the differentiation of osteoblasts.

• 동의생리병리학회지
• /
• 제18권6호
• /
• pp.1821-1824
• /
• 2004

In order to investigate the effects of Radix Achyranthis Bidentatae (RAB) on the growth and differentiation of human osteoblast-like cells, we supplemented the culture medium of MG-63 cells with various concentrations of RAB water extracts. RAB extracts significantly stimulated cell growth, as confirmed by the colorimetric MTT (3-dimethylthiazol-2,5-diphenyltetrazolium bromide) assay. RAB extracts also increased the alkaline phosphatase (ALP) activity, which is a osteoblast differentiation marker. These results suggest that RAB can stimulate osteoblastic activity and may represent new pharmacological tools for the treatment of osteoporosis.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.365-369
• /
• 2002

Silica hydrogel was synthesized by the reaction of liquid sodium silicate with sulfuric acid. The condensation polymerization of the synthesized hydrogel was carried out via an aging process under the acidic or alkaline conditions. Nano porous silica with the pore size below 3 nm and surface area of $715m^2/g$, was obtained by the above processes in acidic ranges(pH : 3~5). The pore size and surface area of the silica varied with pH, and in alkaline ranges(pH : 8~10), those were 21 nm and $300m^2/g$ respectively. The characteristics of the silica varied with the thermal treatment which caused the change of surface area, pore volume and pore diameter.

• BMB Reports
• /
• 제29권1호
• /
• pp.27-31
• /
• 1996

Using topoisomerase II (topo II) isozyme-specific antibodies, we investigated the phosphorylation of topo $II{\alpha}$ in mitotic HeLa cells. Topo $II{\alpha}$ was specifically modified in the mitotic cells, resulting in slow migration on SDS-polyacrylamide gel electrophoresis. To characterize the nature of this modification, we treated the nuclear extracts prepared from the mitotic cells with alkaline phosphatase. After the treatment with alkaline phosphatase, the slowly migrated band disappeared and instead a normal (170 kDa) topo $II{\alpha}$ band appeared. These results indicate that human topo $II{\alpha}$ is modified at a specific site(s) in M phase by phosphorylation, supporting the possibility that M phase-specific phosphorylation of topo II is critical for mitotic chromosome condensation and segregation.

• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.860-865
• /
• 2006

The quality parameters of sponge cake supplemented with soy protein concentrate (SPC) were evaluated. The addition of SPC to wheat flour increased the protein content and alkaline water retention value, but decreased the sedimentation value. Protein content had a positive correlation with the alkaline water retention value, and a negative correlation with the sedintentation value. The higher the concentration of SPC, the higher the RVA pasting temperature and the lower the viscosity. Increasing the level of SPC in flour led to a decrease in mixogram peak time, whereas peak height, width at peak, and width at 8 min progressively increased. As the amount of SPC increased in the formulation, the pH and specific gravity of cake batter increased, whereas the volume and specific volume of sponge cake decreased. The total isoflavones content in SPC increased after heat treatment. The hardness, gumminess, and chewiness increased progressively in accordance with increasing level of SPC.