• Title/Summary/Keyword: Alkali metals

Search Result 144, Processing Time 0.019 seconds

A Study on the Analytical Characterizations of the Low Flow-Low Power ICP-AES (Low flow-low power 유도결합 플라즈마 원자방출 분광법에서의 분석적 특성에 관한 연구)

  • Yang, Hae Soon;Kim, Young Man;Kim, Sun Tae;Choi, Beom Suk
    • Analytical Science and Technology
    • /
    • v.7 no.3
    • /
    • pp.253-260
    • /
    • 1994
  • Analytical characteristics of low power-low flow inductively coupled plasma-atomic emission spectometry(ICP-AES) has been studied. Although the net intensity of the low power ICP is lower than the moderate power ICP, the signal to background ratio becomes higher since the background intensity decreases with decreasing the RF power. The detection limit of the low power ICP is comparable with that of the moderate power ICP. The dynamic range of the calibration curve of the low power ICP is $10^4{\sim}10^5$. The ionization interferences by alkali metals increase with increasing the carrier gas flow rate, but the effects are not varied significantly with the RF power.

  • PDF

Spent Fuel Voloxidation Process Analysis (사용후핵연료 Voloxidation 공정 분석)

  • Kang, Jo Hong;Park, Byung Heung
    • Journal of Institute of Convergence Technology
    • /
    • v.4 no.2
    • /
    • pp.47-50
    • /
    • 2014
  • Voloxidation is a process for converting $UO_2$ into $U_3O_8$ while removing some volatile products in spent fuels (SF). Various oxidative gas conditions including air and mixture of Ar and $O_2$ could be adopted for the process. The gas flows into a reactor under high temperature ($>500^{\circ}C$) and components of SF are reacted with the gas. SF is composed of various components such as actinides, lanthanides, and alkali metals. Therefore, it is of significance to understand their behavior during the reactions for process development. However, due to the limit of available experiments, phase diagram analysis should be preceded. TPP diagram is constructed with respect to temperature-pressure-pressure. It shows a stable phase depending on partial pressures of gas components as well as temperature. In this work, we investigated TPP diagrams for actinides, lanthanides and other oxides to determine stable oxide forms under different gas conditions. The results would be used to set up a material balance under a pyroprocessing scheme of SF and compare the gas conditions for the optimization of fission products removal.

Esterification of the Soybean Oil and Waste Vegetable Oil by Solid Catalysts (고체 촉매를 이용한 대두유와 폐식용유의 에스테르화)

  • Sin, Yong Seop
    • Journal of Environmental Science International
    • /
    • v.13 no.1
    • /
    • pp.79-87
    • /
    • 2004
  • Esterification of soybean oil with methanol was investigated. First of all, liquid-liquid equilibriums for systems of soybean oil and methanol were measured at temperatures ranging from 40 to 65$^{\circ}C$. Profiles of conversion of soybean oil with time were determined from the glycerine content in reaction mixtures for the different kinds of catalysts, such as NaOH, CaO, Ca(OH)$_2$, MgO, Mg(OH)$_2$, and Ba(OH)$_2$. The effects of dose of catalyst, cosolvent and reaction temperature on final conversion were examined. Esterification of waste vegetable oil with methanol was investigated and compared to the case of soybean oil. Solubility of methanol in soybean oil was substantially greater than that of soybean oil in methanol. When the esterification reaction of soybean oil was catalyzed by solid catalyst, final conversion was strongly dependent on the alkalinity of the solid catalyst, and increased with the alkalinity of the metal. Hydroxides from the alkali metals were more effective than oxides. When Ca(OH)$_2$ was used for the esterification catalyst, maximum value of final conversion was measured at dose of 4%. When CHCl$_3$ as a cosolvent, was added into the reaction mixture of soybean oil which catalyzed by Ba(OH)$_2$, maximum value of final conversion was appeared at dose of 3%. When waste vegetable oil was catalyzed by NaOH and solid catalysts, high final conversion, over 90%, and fast reaction rate were obtained.

A Lectin with Mycelia Differentiation and Antiphytovirus Activities from the Edible Mushroom Agrocybe aegerita

  • Sun, Hui;Zhao, Chen Guang;Tong, Xin;Qi, Yi Peng
    • BMB Reports
    • /
    • v.36 no.2
    • /
    • pp.214-222
    • /
    • 2003
  • A lectin named AAL has been purified from the fruiting bodies of the edible mushroom Agrocybe aegerita. AAL consisted of two identical subunits of 15.8 kDa, its pI was about 3.8 determined by isoelectric focusing, and no carbohydrate was discerned. Being treated by pyrogultamate aminopeptidase, the blocked N-terminus of AAL was sequenced as QGVNIYNI. AAL agglutinated human and animal erythrocytes regardless of blood type or animal species. Its hemagglutinating activity was unaffected by acid or alkali treatment and demetalization or addition of divalent metals $Mg^{2+}$, $Ca^{2+}$ and $Zn^{2+}$. AAL was toxic to mice: its LD50 was 15.85 mg per kilogram body weight by intraperitoneal injection. In this study, two novel activities of AAL were proved. It showed inhibition activity to infection of tobacco mosaic virus on Nicotiana glutinosa. The result of IEF suggested that AAL attached to TMV particles. Mycelia differentiation promotion was the other interesting activity. AAL promoted the differentiation of fruit body primordia from the mycelia of Agrocybe aegerita and Auricularia polytricha. AAL antiserum was prepared and immunologically cross-reactived with several proteins from five other kinds of mushrooms. These results suggested that AAL probably was a representative of a large protein family, which plays important physiological roles in mushroom.

Removal of Ni and Pb Ion from Aqueous Solution by the Agricultural Wastes, Allium Roots (농산 폐기물인 Allium속 뿌리를 이용한 Ni와 Pb 이온 제거)

  • 김성호;백승화;김운성;문광현
    • The Korean Journal of Food And Nutrition
    • /
    • v.11 no.6
    • /
    • pp.595-599
    • /
    • 1998
  • A batch experiment was conducted to evaluate the removal capacity of welsh onion(Allium fistulosum L.), shallot (Allium ascalonicum L.), garlic (Allium sativum L.) roots as an adsorbent for Ni and Pb in aqueous solution. One gram of the dried Allium root powder was reacted in 100ml of solution containing 10mg of each heavy metal and effects of metal concentration, pH, temperature, and size of adsorbent on the removal efficiency were evaluated. The results were as follows ; The amount of adsorption of heavy metal ions were higher with the smaller particles size of adsorbent. Garlic root was high adsorption capacity of Pb, especially. The higher concentration of heavy metal solution was, the more amount of adsorption of heavy metals was. The adsorption ratio was differed from a kind of heavy metal. As the temperature increased, the amount of adsorption of Ni and Pb by shallot and welsh onion were decreased. The amount of adsorption of Ni was high under alkali conditions but the amount of adsorption of Pb was high under neutral and acidity condition.

  • PDF

PIGMENT STABILIZATION OF FRESH UNDARIA PINNATIFIDA WHEN TREATED WITH ASHES (재(회) 처리의 미역 색소 안정화 효과)

  • Kim Sang-Ae;Lee Bang-Bo;PARK Dong-Bun
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.3 no.2
    • /
    • pp.120-128
    • /
    • 1970
  • In this study, changes in chlorophyll and carotenoid pigment in fresh and ash treated Undaria pinnetifida were determined by column chromatography. And pigment stabilizing effects of ashes were discussed. The results obtained are summarized as follows: 1. The main carotenoids of Undaria pinnetifida are fucoxanthin, violaxanthin, lutein and $\beta-carotene$. 2. In storage of fresh Undaria pinnetifida at $2-5^{\circ}C$ for 30 days, chlorophyll a decreased rapidly and mainly converted to pheophytin a. Among carotenoids, lutein was markedly lost while the others retained approximately $30\%$ after 30 days' storage. 3, By treating the sample with ashes, the loss of chlorophyll a was restrained whereas that of carotenoids seemed to be promoted. It is considered that pigment stabilization was attributed to both effect, the pH control effect by the alkalinity of ashes and the fixation of the pigment by heavy metals in ashes. The stabilizing effect of chlorophyll a differed from the kind of ashes used. Reed ashes showed better effect than others such as straw or pine ashes. 4. Since fucoxanthin is extremely sensitive to alkali the treatment of ashes with a high alkalinity resulted in rapid decrease of the pigment during storage. 5. In the analysis of ashes, reed ashes which had better effect on chlorophyll a retention than the other ashes showed the highest content of iron.

  • PDF

Preparation and Characterization of the Mine Residue-based Geopolymeric Ceramics (광미를 이용한 지오폴리머 세라믹제조 및 물성)

  • Son, Se-Gu;Lee, Woo-Keun;Kim, Young-Do;Kim, Kyung-Nam
    • Korean Journal of Materials Research
    • /
    • v.21 no.9
    • /
    • pp.502-508
    • /
    • 2011
  • The goal of the present work was to investigate the development of a geopolymeric ceramic material from a mixture of mine residue, coal fly ash, blast furnace slag, and alkali activator solution by the geopolymer technique. The results showed that the higher compressive strength of geopolymeric ceramic material increased with an increase in active filler (blast furnace slag + coal fly ash) contents and with a reduction of mine residue contents. The geopolymeric ceramic had very high early age strength. The compressive strength of the geopolymeric ceramic depended on the added active filler content. The maximum compressive strength of the geopolymeric ceramic containing 20 wt.% mine residue was 141.2 MPa. The compressive strength of geopolymeric ceramic manufactured by adding mine residue was higher than that of portland cement mortar, which is 60 MPa, when cured for 28 days. SEM observation showed the possibility of having amorphous aluminosilicate gel within geopolymeric ceramic. XRD patterns indicate that the geopolymeric ceramic was composed of amorphous aluminosilicate, calcite, quartz, and muscovite. The Korea Standard Leaching Test (KSLT) was used to determine the leaching potential of the geopolymeric ceramic. The amounts of heavy metals were noticeably reduced after the solidification of mine residue with active filler.

Preparation of Water-based Magnetic Fluids with Spent Iron Oxide Catalyst (산화철 폐촉매로부터 수상 자성유체 제조방법)

  • Lee, Hyo-Sook;Shao, Hui-Ping;Kim, Chong-Oh
    • Journal of the Korean Magnetics Society
    • /
    • v.15 no.1
    • /
    • pp.37-41
    • /
    • 2005
  • We prepared water-based magnetic fluids with the spent iron oxide catalysts which were used in the styrene monomer production process. The catalyst was composed with 70% magnetite and alkali metals. The water-based magnetic fluids were prepared by mechanical grinding with olecic acid as a surfactant and water in an attritor. The magnetization of the water-based magnetic fluids was 22 emu/g in the 10 kOe.

Polymer (Polydimethylsiloxane (pdms)) Microchip Plasma with Electrothermal Vaporization for the Determination of Metal Ions in Aqueous Solution

  • Ryu, Won-Kyung;Kim, Dong-Hoon;Lim, H.B.;Houk, R.S.
    • Bulletin of the Korean Chemical Society
    • /
    • v.28 no.4
    • /
    • pp.553-556
    • /
    • 2007
  • We previously reported a 27.12 MHz inductively coupled plasma source at atmospheric pressure for atomic emission spectrometry based on polymer microchip plasma technology. For the PDMS polymer microchip plasma, molecular emission was observed, but no metallic detection was done. In this experiment, a lab-made electrothermal vaporizer (ETV) with tantalum coil was connected to the microchip plasma for aqueous sample introduction to detect metal ions. The electrode geometry of this microchip plasma was redesigned for better stability and easy monitoring of emission. The plasma was operated at an rf power of 30-70 W using argon gas at 300 mL/min. Gas kinetic temperatures between 800-3200 K were obtained by measuring OH emission band. Limits of detection of about 20 ng/mL, 96.1 ng/mL, and 1.01 μ g/mL were obtained for alkali metals, Zn, and Pb, respectively, when 10 μ L samples in 0.1% nitric acid were injected into the ETV.

Kinetic Study on the Low-lying Excited States of Ga Atoms in Ar

  • Kuntack Lee;Ju Seon Goo;Ja Kang Ku
    • Bulletin of the Korean Chemical Society
    • /
    • v.15 no.8
    • /
    • pp.663-669
    • /
    • 1994
  • Decay kinetics of Ga(5s), Ga(5p) and Ga(4d) atoms in Ar were studied by laser induced fluorescence technique. Theground state gallium atoms in the gas phase were generated by pulsed dc discharge of trimethyl gallium and argon mixtures. Both pulsed discharge and YAG-DYE laser system were controlled by a dual channel pulse generator and the delay time between the end of discharge and laser pulses was set 3.0-6.0 ms. The Ga(5s) and Ga(4d) atoms were generated by single photon excitation from the ground state Ga atoms and radiative lifetimes as well as the total quenching rate constants in Ar were obtained from the pressure dependence of the fluorescence decay rates. The Ga(5p) atoms were populated by a two-photon excitation method and the cascade fluorescence from Ga(5s) atoms were analyzed to extract quenching rate constant of Ga(5p) atoms by Ar in addition to radiative lifetimes of Ga(5p) state. The magnitudes of the quenching rate constants by Ar for the low-lying excited states of Ga atoms are 1.6-3$ {\times}10^{-11}cm^3$ molecul$e^{-1}s^{-1}$, which are much larger than those for alkali, alkaline earth and Group 12 metals. Based on the measured rate constants, kinetic simulations were done to assign state-to-state rate constants.