• 한국건설순환자원학회논문집
• /
• 제5권1호
• /
• pp.29-36
• /
• 2017

이 연구의 목적은 알칼리 활성화제의 종류와 양생방법에 따라 나타나는 고로슬래그 기반 섬유보강 복합재료의 압축강도 및 인장거동에 대해 실험적으로 조사하는 것이다. 이를 위하여 알칼리 활성화제 2종류의 배합과 2가지 양생방법을 결정하였고, 밀도 실험, 압축강도 실험과 일축인장 실험을 수행하였다. 실험 결과, 규산나트륨을 사용한 경우 수산화칼슘과 탄산나트륨을 혼합하여 사용한 경우에 비하여 강도, 인장변형성능, 인성 측면에서 우수한 것으로 나타났으며, 활성화제 종류에 따라 양생방법에 의한 영향이 다르게 나타나는 것을 확인하였다.

• 한국결정성장학회지
• /
• 제33권1호
• /
• pp.15-21
• /
• 2023

산화아연 분말을 제조하기 위해 3종류의 나트륨계 알칼리 침전제인 수산화나트륨, 탄산나트륨, 수산화나트륨/탄산수소나트륨을 이용하여 반응에 따른 열역학적 고찰과 아연 침전생성물로부터 산화아연 분말 제조 공정의 차이점을 비교하였다. 나트륨계 알칼리 침전제와의 반응으로 생성된 아연 침전생성물은 각각 히드록시염화아연(Zn₅(OH)₈Cl₂·H₂O)과 탄산아연수산화물 (Zn₅(OH)₆(CO₃)₂·H₂O)임을 XRD를 통해 확인하였다. 나트륨계 알칼리 침전제에 따라 800℃에서 열처리하여 생성된 산화아연 입자 크기를 비교하였다. 혼합된 수산화나트륨 및 탄산수소나트륨의 알칼리 침전제 반응으로 보다 균일한 산화아연 입자를 제조할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.168-169
• /
• 2019

Recently, the flooding of rivers caused by rainy season and heavy rains in Korea causes economic and environmental problems such as flood damage and urban flooding. Therefore, in order to solve these problems, local governments use landscaping methods and drainage facilities to prevent them, but they are not perfect solutions. Domestic awareness also lacks awareness to worry about flooding only during rainy seasons and heavy rains, and to worry about or prevent flooding in the region. In order to solve this problem, we recognize the importance of permeable blocks nationwide and replace or install permeable paving materials on most sidewalks. However, since existing permeable blocks used cement as the main material, calcium carbonate is produced when reacted with water. Efflorescence occurs, and the resulting calcium carbonate blocks the pores of the permeation block, causing a decrease in permeability.

• Journal of Electrochemical Science and Technology
• /
• 제11권1호
• /
• pp.60-67
• /
• 2020

In this study, copper (II) oxide powder for electroplating was prepared by recovering CuCl₂ from NaClO₃ type etching wastes via recovered non-sintering two step chemical reaction. In case of alkali copper carbonate [mCuCo₃·nCu(OH)₂], first reaction product, CuCo₃ is produced more than Cu(OH)₂ when the reaction molar ratio of sodium carbonate is low, since m is larger than n. As the reaction molar ratio of sodium carbonate increased, m is larger than n and Cu(OH)₂ was produced more than CuCO₃. In the case of m has same values as n, the optimum reaction mole ratio was 1.44 at the reaction temperature of 80℃ based on the theoretical copper content of 57.5 wt. %. The optimum amount of sodium hydroxide was 120 g at 80℃ for production of copper (II) oxide prepared by using basic copper carbonate product of first reaction. At this time, the yield of copper (II) oxide was 96.6 wt.%. Also, the chloride ion concentration was 9.7 mg/L. The properties of produced copper (II) oxide such as mean particle size, dissolution time for sulfuric acid, and repose angle were 19.5 mm, 64 second, and 34.8°, respectively. As a result of the hole filling test, it was found that the copper oxide (II) prepared with 120 g of sodium hydroxide, the optimum amount of basic hydroxide for copper carbonate, has a hole filling of 11.0 mm, which satisfies the general hole filling management range of 15 mm or less.

• 한국인쇄학회지
• /
• 제8권1호
• /
• pp.71-87
• /
• 1990

This paper presents a simple algorithm to obtain three dimensional information of an object. In the preprocessing of the stereo matching,feature point informations of stero image must be less sensitive to noise and well liked the correspondance problem. This paper described a simple technique of struture feature extraction of 3-D object and used edge-end point expanding method for unconnected line instade of Hough transform. The feature such as corner point and their angles are used for matching problem. The experimental results show that the described algorithm is a useful method for stereo correspondence problem.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.30-34
• /
• 1995

There are carbonatiion, salt attack, freezing & thawing and alkali-aggregate reactions as the cautions of durability lowering of concret structure. Generally, these cautions complicatedly lower the durability of structure and among these cautions the most serious problem is salt attack and carbonation. This study is intending to get the carbonation phenominon, that among cement calcium hydroxides change into calcium carbonate by responding to carbon mitrogen in the air.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.35-40
• /
• 1995

There are carbonatiion, salt attack, freezing & thawing and alkali-aggregate reactions as the cautions of durability lowering of concret structure. Generally, these cautions complicatedly lower the durability of structure and among these cautions the most serious problem is salt attack and carbonation. This study is intending to get the carbonation phenominon, that among cement calcium hydroxides change into calcium carbonate by responding to carbon mitrogen in the air.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.519-523
• /
• 2012

A kinetic study is reported on nucleophilic displacement reactions of benzyl 2-pyridyl carbonate 6 with alkalimetal ethoxides, EtOM (M = Li, Na, and K), in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plots of pseudo-firstorder rate constant $k_{obsd}$ vs. [EtOM] curve upward, a typical phenomenon reported previously for alkaline ethanolysis of esters in which alkali-metal ions behave as a Lewis-acid catalyst. The kobsd value for the reaction of 6 with a fixed EtOK concentration decreases rapidly upon addition of 18-crown-6-ether (18C6), a complexing agent for $K^+$ ion up to [18C6]/[EtOK] = 1.0 and then remains constant thereafter, indicating that the catalytic effect exerted by K+ ion disappears in the presence of excess 18C6. The reactivity of EtOM towards 6 increases in the order $EtO^-$ < EtOLi < EtONa < EtOK, which is contrasting to the reactivity order reported for the corresponding reactions of 2-pyridyl benzoate 4, i.e., $EtO^-$ < EtOK < EtONa < EtOLi. Besides, 6 is 1.7 and 3.5 times more reactive than 4 towards dissociated $EtO^-$ and ion-paired EtOK, respectively. The reactivity difference and the contrasting metal-ion selectivity are discussed in terms of electronic effects and transition-state structures.

• 한국가정과학회지
• /
• 제6권1호
• /
• pp.27-34
• /
• 2003

We investigated the bacterial and chemical retting conditions of ramie grown in Hansan. Bacterial retting was done in troughs at a temperature of 30${\pm}$2$^{\circ}C$ for 1, 2, 3, 4, 5, 6 and 10 days. Chemical retting(CR) was done at the different conditions using sodium silicate (Na$_2$SiO$_3$), sodium carbonate(Na$_2$CO$_3$) and sodium hydroxide(NaOH) as alkali solutions. The retting solution was boiled during 1. 2, 4 and 6 hours respectively at the different concentration(0.5, 2.0, 4.0, 6.0. 8.0 %) with decorticated ramie stems submerged in it. The treated ramie was then rinsing with running tap water thoroughly, which was further soaker in 0.5% acetic acid (v/v) solution for three minutes and washed thoroughly with distilled water. Finally ramie was dried for 2 hours in vacuum oven at 100 $^{\circ}C$. To know change of ramie fiber characteristics retted at the different conditions, weight loss, fiber bundle strength were tested and color, texture, luster etc. were also sensually evaluated. The results were as follows. $.$ Weight loss of ramie retted in each alkali solutions were about 10%, 20% and 30% in sodium silicate, sodium carbonate and sodium hydroxide, respectively. $.$ Chemical retting was faster than bacterial retting, but the color of chemically retted ramies were worse than that of bacterially retted ramies. $.$ The combination of bacterial and chemical processing showed some merits. A combination of either 2 or 3 days of bacterial and then chemical retting might provide the best quality ramie. $.$ Ramie fiber became cottonized ramie when retted in 8% NaOH solution for 6-8hours.

• 공업화학
• /
• 제29권3호
• /
• pp.258-263
• /
• 2018

본 연구에서는 전자산업폐수에 함유되어 있는 불소성분을 제거하기 위하여 미세 침강성 석회석을 적용해보고자 하였다. 석회석의 입자크기는 평균 $0.96{\mu}m$이었으며, 질량 기준으로 70%가 함유된 수용액상의 pH는 10이었다. 현탁액의 침강속도는 2 mL/hr로 나타났다. 본 연구의 시험용 석회석 수용액은 폐수 중화와 불소이온 제거능력 면에서 기존의 액상소석회와 동등 이상의 성능을 보여주었다. 추가적인 알칼리 증량제의 투입양에 따라 pH 7에 도달할 수 있는 시험용 칼슘원의 양은 기존의 석회수보다 적었다. 또한 불화수소로 고정시킬 수 있는 양도 미분말 석회석이 석회수보다 큰 것으로 나타났다. 또한, Minteq 평형모델링으로부터 다양한 불소와 칼슘화합물 형성이 예상되었다.