• 한국자기학회지
• /
• 제5권5호
• /
• pp.740-744
• /
• 1995

For the fabrication of a multi-pole anisotropic Sr-ferrite magnet by powder injection molding, it is important to control effectively the alignment of magnetic powders during the injection molding process. The effect of the fluidity of powder/binder mixture on the powder alignment was studied with changing the particle sizes and the volume fraction of Sr-ferrite magnetic powders. The critical volume fraction of Sr-ferrite powders increases from 58 vol.% to 64 vol.% as the mean powder size increases from $0.8\;\mu\textrm{m}$ to $1.2\;\mu\textrm{m}$. A Sr-ferrite powder alignment greater than 80 % is achieved at the conditions of an apparent viscosity lower than 1000 poise at $1600\;sec^{-1}$ shear rate, an applied magnetic field higher than 4 kOe, and a powder volume fraction 8 vol.% lower than the critical fraction. The powder alignment obtained during the injection molding process is not much affected by the subsequent processes of debinding and sintering, showing the magnetic properties of 3.8 kG of remanent flux density and 3.37 kOe of intrinsic coercivity.

• 한국분말재료학회지
• /
• 제19권1호
• /
• pp.1-5
• /
• 2012

In order to improve the remanence of (Nd, Dy)-Fe-B sintered magnets, we investigated the influence of compaction conditions such as packing density, applied field and green density on the magnetic properties. While the remanence decreased with increasing the packing density and green density, it increased with the increase of the applied field. In addition, XRD analysis revealed that the remanence was enhanced as the degree of powder alignment was improved. The green density was more influential on the remanence than the packing density and applied field.

• 한국자기학회지
• /
• 제4권3호
• /
• pp.219-225
• /
• 1994

이방성 Sr-페라이트/레진본드 영구자석에서 외부자장과 성형체의 유동성이 Sr-페라이트 자성분말의 방향성에 어떤 영향을 미치는지 조사하였다. 이방성 Sr-페라이트 자성분말의 방향성은 외부자장의 세기와 충전율과 성형온도의 함수인 유동성에 따라 변화하였다. 자성분말의 방향성은, 자성분말의 충전율이 56vol%이고 $1000sec^{-1}$의 전단속도에서 성형체의 겉보기점도가 약 3000 poise 이하인 성형온도에서 5 kOe 이상의 자장을 가해주었을때, 본 실험에서 얻을 수 있는 최대값을 나타내었다. 이러한 조건에서 직류자기이력곡선으로부터 측정된 Sr-페라이트 자성분말의 방향성은 배향도가 84~85%(0.84~0.85)이었다. 이 결과는 ${23~40}^0$ 범위의 $2{\theta}$에서 X-선 회절분석 결과인 0.85의 방향계수와 일치하였다. 이러한 Sr-페라이트 자성분말의 방향성에서 이방성 레진본드 영구자석은 잔류자 속밀도가 2.2kG, 최대자기에너지적이 2.2 MGOe인 자기특성을 나타내었다.

• 한국자기학회지
• /
• 제8권3호
• /
• pp.150-155
• /
• 1998

플라스틱 이방성 페라이트 자석에서 페라이트 분말함량 변화에 레올로지와 자기특성의 변화를 조사하였다. 분말함량 변화에 따른 상대점도의 측정값과 이론식을 비교하였다. 분말함량 증가에 따른 혼합물의 상대점도 증가경향과 플라스틱자석의 분말배향도의 감소경향은 정확히 일치하였다. 일정한 자장하에서 사출성형된 플라스틱 이방성 페라이트 자석에서 잔류자속밀도와 최대자기에너지적은 분말함량 증가에 따라 적선적으로 증가하다가 다시 감소하여 극대값을 나타냈으며, 극대값 이후의 자기특성 가소는 분말배향도의 급격한 감소에 기안하였다. 자기특성 극대값을 나타내는 분말한량은 사출형성시 자장의 세기와 결합체의 용융점도에 의존하며, 높은 자기특성을 위해서는 낮은 용융점도의 결합제 사용이 필요하다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1995년도 춘계연구발표회 논문개요집
• /
• pp.72-73
• /
• 1995

• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.23-28
• /
• 2010

HDDR treated anisotropic Nd-Fe-B powders have been widely used for the sheet motors and the sunroof motors of hybrid or electric vehicles, due to their excellent magnetic properties. Microstructural alignment of HDDR treated powders are mostly depending on the hydrogen reaction in disproportionation step, so the specific method to control hydrogenation reaction is required for improving magnetic properties. In disproportionation step, hydrogenation pressure and reaction time were controlled in the range of 0.15~1.0 atm for 15~180 min in order to control the micorstructural alignment of $Nd_2Fe_{14}B$ phase and, at the same time, to improve remanence of HDDR treated magnet powders. In this study, we could obtain a well aligned anisotropic Nd-Fe-B-Ga-Nb alloy powder having high remanence of 12 kG by reducing hydrogen pressure down to 0.3 atm in disproportionation step.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.326-335
• /
• 2010

In this paper, the effect of electrical characteristics and electrode shape on the alignment and attachment of multi-walled carbon nanotubes (MWNTs) has been studied. The attraction and alignment of MWNTs between the gaps has been investigated by applying electric field which is called electrophoresis and dielectrophoresis. According to the frequency of electric field, positive or negative dielectrophoretic force can be determined. The concentration of MWNTs solution was $5\;{\mu}g/ml$, and a droplet of $1.0{\sim}1.5\;{\mu}l$ was dropped between two electrodes. Through the repeated experiments, the optimal electrical conditions for aligning and attaching MWNTs in the desired places were obtained. Since the frequency range of 100 kHz~10 MHz generated positive dielectrophoretic force, MWNTs were attracted and aligned between the gaps with this frequency range. For generating enough force to attract MWNTs, the appropriate voltage range was $0.3{\sim}1.3\;V_{rms}/{\mu}m$. Furthermore, the effect of electrode shape on the alignment of MWNTs was investigated. A single MWNT attachment was accomplished on the round shaped with 70% yield.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2001년도 High Temperature Superconductivity Vol.XI
• /
• pp.58-58
• /
• 2001

• 한국분말재료학회지
• /
• 제18권1호
• /
• pp.24-28
• /
• 2011

Effect of Cu content on microstructural and magnetic properties of a $(Nd_{26.06},Dy_{6.51})Fe_{bal.}$ $Cu_xB_{0.97}$(wt.%), (x = 0.2, 0.3, 0.4, 0.5) strip-cast was studied. The average inter-lamellar spacing in the free surface and wheel side of the strip cast increased as the Cu content increases. The grain uniformity, the grain alignment, and (00L) texture of the strip cast increased with Cu contents up to 0.4 wt.%. These microstructural changes were attributed to the decrease of the effective cooling rate of the melted alloy caused by the decrease of the melting temperature of resulting from Cu addition. Coercivity and remanence were increased because of the grain alignment and (00L) texture improvement with Cu contents up to 0.4 wt.%.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.285-290
• /
• 2012

The present study was focused on the analysis of the electric and thermal properties of spark plasma sintered $Bi_{0.5}Sb_{1.5}Te_3$ thermoelectric material. The crystal structure, microstructure, electric and thermal properties of the sintered body were evaluated by measuring XRD, SEM, electric resistivity, Hall effect and thermal conductivity. The $Bi_{0.5}Sb_{1.5}Te_3$ sintered body showed anisotropic crystal structure. The c-axis of the $Bi_{0.5}Sb_{1.5}Te_3$ crystal aligned in a parallel direction with applied pressure during spark plasma sintering. The degree of the crystal alignment increased with increasing sintering temperature and sintering time. The electric resistivity and thermal conductivity of the $Bi_{0.5}Sb_{1.5}Te_3$ sintered body showed anisotropic characteristics result from crystal alignment.