• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.285-290
• /
• 2012

The present study was focused on the analysis of the electric and thermal properties of spark plasma sintered $Bi_{0.5}Sb_{1.5}Te_3$ thermoelectric material. The crystal structure, microstructure, electric and thermal properties of the sintered body were evaluated by measuring XRD, SEM, electric resistivity, Hall effect and thermal conductivity. The $Bi_{0.5}Sb_{1.5}Te_3$ sintered body showed anisotropic crystal structure. The c-axis of the $Bi_{0.5}Sb_{1.5}Te_3$ crystal aligned in a parallel direction with applied pressure during spark plasma sintering. The degree of the crystal alignment increased with increasing sintering temperature and sintering time. The electric resistivity and thermal conductivity of the $Bi_{0.5}Sb_{1.5}Te_3$ sintered body showed anisotropic characteristics result from crystal alignment.

• 한국자기학회지
• /
• 제6권5호
• /
• pp.310-316
• /
• 1996

본 연구에서 인가 자장의 세기, 압출 금형의 온도 및 압출 속도가 페라이트계 이방성 압출 본드 자석의 자기적 특성에 미치는 영향을 조사하였다. 압출 본드 자석 단면에 대한 X-선 회절실험 결과 압출 금형 내의 용융 흐름에 의해 자성 분말의 자장 방향으로의 배향이 억제됨을 알 수 있었다. 압출 금형의 온도가 $20^{\circ}C$ 일 때 4 kOe의 인가자장에서 82 %의 배향도를 얻을 수 있었으며, Sr-페라이트 분말의 충전율이 50 vol%일 때 잔류자속밀도 2.2 kG인 압출 본드 자석을 제조할 수 있었다.

• ETRI Journal
• /
• 제42권2호
• /
• pp.163-174
• /
• 2020

Numerous wearable technology companies have recently developed several headmounted display (HMD) products for virtual reality (VR) services. 5G wireless networks aim at providing high-quality 3D multimedia services such as VR, augmented reality, and mixed reality. In this study, we examine the application of millimeter-wave (mmWave) technology to realize low-latency wireless communication between an HMD and its content server. However, the propagation characteristics of mmWave present several challenges such as the deafness, blockage, and beam alignment problems, and interference among content servers. In this study, we focus on an environment that provides VR services in the mmWave band and introduce existing techniques for addressing such challenges. In addition, we employ a commercialized IEEE 802.11ad VR dongle to measure the actual data rate of an mmWave VR application and identify the degree to which the performance deteriorates when the above problems occur. Finally, we verify the feasibility of the proposed solutions through a simulation of several VR scenarios in the mmWave band.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.142-147
• /
• 2022

After introducing Hybrid Bonding technology into image sensors using stacked sensors and image processors, large quantity production became possible. As a result, it is currently used in most of the CMOS image market in smartphones and other image-based devices worldwide, and almost all stacked CIS manufacturing sites have focused on miniaturization using hybrid bonding. In this study, an upper wafer handling module for Wafer to Wafer Hybrid Bonding developed to increase the alignment and precision between wafers when wafer bonding. The module was divided two parts to reduce error of both the alignment and degree of precision during wafer bonding. Wafer handling module developed both new Tip/Tilt system controlling θx,θy of upper wafer and striker to push upper wafer. Based on this, it was confirmed through the stability evaluation that the upper wafer handling module can be controlled without any problem during W2W hybrid bonding.

• 대한두개안면성형외과학회지
• /
• 제23권6호
• /
• pp.269-273
• /
• 2022

Naso-orbito-ethmoidal (NOE) fractures are complicated fractures of the mid-face. The treatment of NOE fractures is challenging and a comprehensive treatment strategy is required. We introduce a case of NOE fracture treated with open reduction and suspension sutures. A 28-year-old woman presented with a unilateral NOE fracture. To reduce the frontal process of the maxilla, a suspension suture was made by pulling the fragment using a double arm suture via a transcaruncular incision. The suture thread was placed in the horizontal plane. Another suspension suture on the inferior orbital rim assisted reduction procedure, and they passed through the overlying skin. The reduction alignment could be finely adjusted by tightening the transcutaneous suture threads while checking the degree of bone alignment through the subciliary incision. The two suture threads were suspended using a thermoplastic nasal splint. An additional skin incision on the medial canthal area, which would have resulted in a scar, could be avoided. Four months postoperatively, computed tomography showed an accurate and stable reduction. The patient was satisfied with her aesthetic appearance, and functional deficits were not present.

• 천문학회보
• /
• 제45권1호
• /
• pp.33.3-34
• /
• 2020

The Milky Way (MW) and other systems including M31 and Cen A have flattened structures of their satellites (Disk of Satellites, DoS). Such structures are rare in simulations under the ΛCDM paradigm. DoS is known to depend mainly on 1) the alignment of satellite orbits and 2) the degree of central concentration of satellites. In this work, we examine quantitatively how these two parameters affect the flatness of a system. We find that the MW-like DoS is rare in IllustrisTNG100 simulation because its two parameters are out of the 1-s range and furthermore the MW has a structure more flattened than the other systems having similar parameters. Besides, we propose a new criterion for the MW-like systems superseding the conventional ones such as major-minor axis ratio of the MW's DoS with a value of 0.183. Each satellite system has a specific orbital combination and thus has a particular distribution of its parameters (and thus flatness). The median of the distribution is set as the representative value of each system. And the representative value of the MW can be used as a new criterion for classifying the MW-like DoS. We reconstruct the orbital combination of the observed MW satellites using GAIA DR2 data and find the systems in the simulation that have representative values similar to the new criterion from the reconstructed MW system. This allows us a new interpretation on the rarity of MW-like DoS in cosmological simulations.

• 대한교통학회지
• /
• 제24권5호
• /
• pp.109-121
• /
• 2006

도로는 일관성 있는 선형으로 안전하게 주행할 수 있도록 설계되어야 하며. 안전성 향상을 위해 적절한 주행속도로 주행할 수 있는 환경이 제공되어야 한다 적절한 도로환경을 제공하기 위하여 설계 시 정확한 주행속도의 반영은 필수적이므로, 이를 예측할 수 있는 주행속도 예측모형이 필요하다고 판단된다. 이에 본 연구에서는 주행속도 예측모형 구축을 위해 영동고속도로를 대상으로 주행속도에 영향을 미치는 요인을 크게 선형요소, 교통운영특성 요소로 분류하였다. 분류한 요인을 중심으로 평면직선, 평면곡선구간 그리고 종단곡선구간의 각 구간별로 상관분석을 통하여 주행속도에 영향을 미치는 요인을 선정하였다 선정한 요인들을 대상으로 다중회귀모형을 이용하여 주행속도예측모형을 구축 및 검증 결과, 본 연구의 주행속도 예측모형이 통계적으로 모두 적합한 것으로 나타났다. 본 연구는 평면 및 종단선형요소를 동시에 반영하여 국내 도로 실정에 맞는 주행속도 예측모형을 개발하였다는 데에 그 의의가 있다. 그러나 분석자료가 영동고속도로로 한정되어 전국을 대표할 수 없으므로 향후 전국을 대상으로 도로 선형요소를 바탕으로 대표성을 지닐 수 있는 연구가 필요하다고 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권4호
• /
• pp.288-294
• /
• 2016

선박이 고출력화, 대형화 됨에 따라 추진축의 강성은 증가한 반면에 선체는 고장력 후판을 사용하므로 이전의 선체보다 훨씬 더 쉽게 변형되는 실정이다. 이는 기존의 선박보다 더욱 정교한 축계정렬이 요구됨을 의미한다. 본 연구에서는 최근 친환경 고효율 선박으로 등장한 5만DWT급 석유화학제품운반선을 대상으로 스트레인게이지법을 이용한 계측을 실시하고 축계 베어링 반력 및 선체 변형량 분석을 수행하였다. 계측은 선박의 통상 흘수 변화를 고려한 5개 조건에서 수행하여 추진축계가 선체 변형의 영향 하에서도 허용치를 만족하는지 여부를 확인하였다. 또한 이론적 계산방법, 잭업법 및 스트레인게이지법의 결과를 상호 비교하여 해석의 신뢰성을 교차검증하였다.

• 대한구순구개열학회지
• /
• 제14권1_2호
• /
• pp.1-18
• /
• 2011

Skeletal malocclusion is the result of abnormal dimension and alignment of each skeletal component. Understanding on these mechanisms may help to elucidate the etiology of skeletal malocclusion and to establish population-oriented treatment plans. Attempts to subdivide the Angle's classification have been performed for Class III malocclusion, while few studies have been conducted for Class II malocclusion despite recent growing interests in Class II malocclusion. 200 adults (88 male, 112 female) with skeletal Class II malocclusion were collected and subdivided using cluster analysis, using the measurements representing the dimension and the alignment of each facial skeletal component. The properties of each cluster was grouped within the subjects and a comparison between the subjects and the control group (38 male, 35 female) with normal occlusion was performed. Six clusters were finally recognized in each male and female groups. The clusters in both genders were mainly characterized by the cranial base alignment, dimension of the posterior cranial base, dimension of the mandibular ramus and the degree of mandibular rotation. The results implicate that active treatment of mandible rather than the nasomaxillary complex may be primarily considered for the correction of Korean Class II skeletal pattern.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.245-249
• /
• 2007

The liquid crystal display (LCD) applications treated on the organic overcoat thin film surfaces by ion beam irradiation was successfully studied. The good LC aligning capabilities treated on the organic overcoat thin film surfaces with ion beam exposure of $60^{\circ}$ for 2 min above ion beam energy of 1200 eV can be achieved. But, the alignment of defect of NLC on the organic overcoat surface at low energy of 600 eV was measured. The pretilt angle of NLC on the organic overcoat thin film surface with ion beam exposure of $60^{\circ}$ for 2 min at energy of 1800 eV was measured about 1 degree. Finally, the good thermal stability of LC alignment on the organic overcoat thin film surface with ion beam exposure of $60^{\circ}$ for 2 min until annealing temperature of $200^{\circ}C$ can be measured.