• 설비공학논문집
• /
• 제18권8호
• /
• pp.656-663
• /
• 2006

The convective heat transfer on the outer surface of tube arrays perpendicular to the flow direction was experimentally investigated. The test sections which include the aligned and staggered arrangements were made and the local heat transfer coefficients on the outer surface of the tube were measured after the flow has been fully developed. The results showed that the local heat transfer coefficients of the staggered arrangement, which has transverse pitch of 0.075 m and longitudinal pitch of 0.08 m, were about 15% greater than that of the aligned arrangement. Also, the overall mean Nusselt number of the former was greater than that of the latter. It is verified that the results obtained by using the simulation show the same tendency with those of experiment.

• 에너지공학
• /
• 제15권1호
• /
• pp.28-34
• /
• 2006

고온의 연소가스를 교란시키고 열교환 요소와 오랜시간 접촉하도록 원관을 옆으로 서로 맞대어 붙인 후 이 원관의 배열과 수직한 방향으로 연소가스가 흐르도록 설계된 열교환기에 대하여 실험적으로 열전달특성을 조사하기 위해서 유동이 충분히 발달한 영역에서 관 외부 원주방향으로 스테인레스 박판을 부착하고 직류 전원공급기를 통해 열유속을 주어, 관 주위의 대류열전달계수를 측정하였다. 실험 결과 세로피치 0.075 m, 가로피치 0.08 m이고 엇갈림 배열일 때 열전달계수가 15% 정도 차이가 크게 났으며, 레이놀즈수가 증가할수록 열전달계수도 증가함을 알 수 있었다. 또한 전체 평균 누셀트 수도 엇갈림 배열이 정렬배열에 비해 높게 나타났다.

• 산업기술연구
• /
• 제22권B호
• /
• pp.155-161
• /
• 2002

As the wireless communications are gradually developed, the higher frequency is demanded and the smaller the size of antenna shall be reduced by the wavelength of the operating frequency. However, the smaller the size of antenna becomes, the less the gain is obtained according to the frequency, so that a new attempt such as an array antenna has been examined to improve the characteristics. Also, for the convenience of communication, the omni-directional property is required. In this paper, two antennas system which is aligned in cross direction in tested and analyzed. The main scope is focused to get an appropriated distance between the two small antennas to get better properties. There are various ways of array arrangement, but in this study, it should be placed on the same PCB for easy implementation and the direction of each antenna are aligned to be a cross($90^{\circ}$) position. The study is carried out by comparing the radiation patterns mainly, and the theoretical expectation and the computer simulation are also executed. The final model is the folded IF-antennas system printed on PCB and the ideal dipole-antenna arrangement in also test to verify the possibility of our implementation. And it is finally proved by measuring experiments.

• 한국진공학회지
• /
• 제15권1호
• /
• pp.81-88
• /
• 2006

다중 적층법을 이용하여 수평방향으로 자기정렬된 InGaAs/GaAs 양자점(quantum dot, QD)을 제작하고, 원자력간 현미경(AFM) 사진과 발광(PL) 스펙트럼을 이용하여 QD의 특성을 분석하였다. 적층주기가 증가함에 따라 정렬 QD의 길이가 길어지고, 임계 성장온도 이상에서는 QD 사이의 상호확 산에 의하여 양자선 형태로 변화함을 관측하였다. 성장 변수가 서로 다른 4개 시료의 비교 분석을 통하여, 수직으로 적층되면서 비등방성 정렬이 이루어지고, 수 ${\mu}m$ 이상 1차원적으로 정렬된 QD 사슬 모양 의 구조를 얻을 수 있었다. 또한 성장일시멈춤 과정을 통한 이주시간의 증가는 QD의 1차윈 정렬에 중요한 변수임을 알 수 있었다. 고온에서 덮개층을 형성한 QD 구조에서 관측된 발광 에너지의 청색변위 현상은 InGaAs QD로부터 In이 덮개층으로 확산되었기 때문으로 해석된다.

• 한국가구학회지
• /
• 제23권2호
• /
• pp.185-194
• /
• 2012

Contemporary society maintains mass-product system that keeps endless cycle of making and consuming. In this vein, everyday life becomes to be under the control of function and efficiency. On the contrary, the people are getting to have a desire of escaping from this everydayness, that is, the desire for non-everydayness. British architect, Nigel Coates understood the potentiality of contemporary metropolis which produce new experiences through their heterogeneities. During 1980s, Japanese economic bubble provided rich nourishment to the desire for non-everydayness based on consumers' tastes. Nigel Coates snatched this phenomena and designed commercial spaces aligned to the non-everydayness. He shows very eloquent version of escaping sense. We can find the exquisite quality of non-everydayness through design vocabulary of object's form and arrangement. In the viewpoint of object form, Coates adopted classical statues of Greek, that is antique, and modern gadgets such as airplane wings and seats. Also, we can find abundant gestures of curvilineal contours throughout the objects he designed. As for the objects' arrangement, he introduced repetition and curved composition that can stimulate human interaction with interior scape.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.345-346
• /
• 2023

As the shape and size of detectable objects diversifying recognition and segmentation algorithms have been developed to acquire accurate shape information. Although a high density of data captured by the repetition of scanning improves the accuracy of algorithms the high dense data decreases the efficiency due to its large size. This paper proposes standardization algorithms using the feature of structural members on indoor point cloud data to improve the process. First of all we determine the reduction rate of the density based on the features of the target objects then the data reduction algorithm compresses the data based on the reduction rate. Second the data arrangement algorithm rotates the data until the normal vector of data is aligned along the coordinate axis to allow the following algorithms to operate properly. Final the data arrangement algorithm separates the rotated data into their leaning axis. This allows reverse engineering of indoor point clouds to obtain the efficiency and accuracy of refinement processes.

• 콘크리트학회논문집
• /
• 제19권6호
• /
• pp.685-692
• /
• 2007

낮은 전단벽과 같이 전단력에 의하여 지배 받는 철근콘크리트 부재의 경우, 전단력은 부재의 응력-변형률 이력곡선에서 핀칭 효과에 영향을 미친다. 그러나 최근의 연구에 따르면 철근의 배근 방향이 주응력 방향과 일치할 경우 철근콘크리트 부재의 응력-변형률 이력곡선에서 핀칭 효과가 없어지는 것으로 나타났다. 본 연구에서는 철근콘크리트 부재의 응력-변형률 이력곡선에서 핀칭 효과의 발생 유무를 변형률의 적합 조건을 고려한 트러스 모델을 이용하여 이론적으로 설명하였다. 해석 결과는 철근콘크리트 부재의 핀칭 효과가 철근의 배근 방향에 큰 영향을 받는 것을 보여준다. 또한 에너지소산 성능은 외력의 주응력 방향과 철근의 배근 방향 사이의 각도 차이에 따라 선형적으로 증가하지 않았다.

• 자원환경지질
• /
• 제57권1호
• /
• pp.17-23
• /
• 2024

Ground penetrating radar (GPR) survey is a geophysical method that utilizes electromagnetic waves reflecting from a boundary where the electromagnetic property changes. As the frequency of the antenna is about 25 MHz ~ 1 GHz, it is effective to acquire high resolution images of underground pipe, artificial structure, underground cavity, and underground structure. In this study, we analyzed the change of signals reflected from the same underground objects according to the arrangement of transceiver antennas used in ground penetrating radar survey. The antenna used in the experiment was 200 MHz, and the survey was performed in the vertical direction across the sewer and the parallel direction along the sewer to the sewer buried under the road, respectively. A total of five antenna array methods were applied to the survey. The most used arrangement is when the transmitting and receiving antennas are all perpendicular to the survey line (PR-BD). The PR-BD arrangement is effective when the object underground is a horizontal reflector with an angle of less than 30°, such as the sewer under investigation. In this case study, it was confirmed that the transmitter and receiver antennas perpendicular to the survey line (PR-BD) are the most effective way to show the underground structure. In addition, in the case where the transmitting and receiving antennas are orthogonal to each other (XPOL), no specific reflected wave was observed in both experiments measured across or parallel to the sewer. Therefore, in the case of detecting undiscovered objects in the underground, the PR-BD array method in which the transmitting and receiving antennas are aligned in the direction perpendicular to the survey line taken as a reference and the XPOL method in which the transmitting and receiving antennas are orthogonal to each other are all used, it can be effective to apply both of the above arrangements after setting the direction to 45° and 135°.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.1001-1010
• /
• 1999

Thermo-mechanical behavior of discontinuous shape memory alloy(SMA) reinforced polymeric composite has been studied using modified shear lag theory and finite element(FE) analysis with 2-D multi-fiber model. The aligned and staggered models of short-fiber arrangement are employed. The effects of fiber overlap and aspect ratio on the thermomechanical responses such as the thermal expansion coefficient are investigated. It is found that the increase of both tensile stress(resistance stress) in SMA fiber and compressive stress in polymer matrix with increasing aspect ratio is the main cause of low thermal deformation of the composite.

• 한국정밀공학회지
• /
• 제33권3호
• /
• pp.225-230
• /
• 2016

Since the development of anodic aluminum oxide (AAO), extensive studies have been conducted ranging from fundamental research to the applications of AAO. Most of the research on AAO structures have focused on well-aligned nanoporous structures fabricated under specific conditions. This study investigated fabricable AAO structures with anodization performed with various temperatures, electrical potentials, and basal plane surfaces. As a result, nanoporous and nanofibrous structures were fabricated. The nanopores were formed at a relatively lower temperature and potential, and the nanofibers were formed at a relatively higher temperature and potential regardless of the basal plane surface. The shape of the base surface was found to influence the structural arrangement in nanoporous morphologies. These interesting findings relating to new morphologies have the potential to broaden the possible applications of AAO materials.