• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.120-124
• /
• 2011

Silicon heterojunction solar cells have been studied by many research groups. In this work, silicon heterojunction solar cells having a simple structure of Ag/ZnO:Al/n type a-Si:H/p type c-Si/Al were fabricated. Samples were fabricated to investigate the effect of transparent conductive oxide growth conditions on the interface between ZnO:Al layer and a-Si:H layer. One sample was deposited by ZnO:Al at low working pressure. The other sample was deposited by ZnO:Al at alternating high working pressure and low working pressure. Electrical properties and chemical properties were investigated by light I-V characteristics and AES method, respectively. The light I-V characteristics showed better efficiency on sample deposited by ZnO:Al by alternating high working pressure and low working pressure. Atomic concentrations and relative oxidation states of Si, O, and Zn were analyzed by AES method. For poor efficiency samples, Si was diffused into ZnO:Al layer and O was diffused at the interface of ZnO:Al and Si. Differentiated O KLL spectra, Zn LMM spectra, and Si KLL spectra were used for interface reaction and oxidation state. According to AES spectra, sample deposited by high working pressure was effective at reducing the interface reaction and the Si diffusion. Consequently, the efficiency was improved by suppressing the SiOx formation at the interface.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.9-14
• /
• 2011

We have investigated the electrical properties of $AlO_x$ thin film device. The device has been fabricated top-bottom electrode structure and its transport properties are measured in order to study the resistance change. Electrical properties with linear voltage sweep on a electrodes are used to show the variation of resistance of $AlO_x$ thin film device. Fabricated $AlO_x$ thin film device with MIM structure is changed from a high conductive On-state to a low conductive Off-state by the external linear voltage sweep. It is found that the initial resistance of the $AlO_x$ thin film is low-resistance On state and reversible switching occurs. Consequently, we believe $AlO_x$ thin film is a promising material for a next-generation nonvolatile memory and other electrical applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.462-462
• /
• 2014

The effect of rear passivation for passivated emitter and rear cell (PERC) using ozone and H2O oxidant of atomic layer deposited (ALD) Al2O3 was studied by post-annealing in N2 and forming gas ambients. Rear surface of PERC solar cell was passivated by Al2O3 grown by ALD with ozone and H2O oxidant. Al2O3 grown by ALD with ozone oxidant has been known to have many advantages, such as lower interface defects, low leakage current density. Its passivation quality is better than Al2O3 with H2O. Al2O3 layer with 10 nm and 20 nm thickness was grown at $150^{\circ}C$ with ozone oxidant and at $250^{\circ}C$ with H2O oxidant. And then each samples were post-annealled at $450^{\circ}C$ in N2 ambients and at $850^{\circ}C$ in forming gas ambients. The passivation quality was investigated by measuring the minority carrier lifetime respectively. We examined atomic layer deposited Al2O3 such as growth rate, film density, thickness, negative fixed charge density at AlOx/Si interface, and reflectance. The influences of process temperature and heat treatment were investigated using Sinton (WCT-120) by Quasi-Steady State Photoconductance (QSSPC) mode. Ozone-based ALD Al2O3 film shows the best carrier lifetime at lower deposition temperature than H2O-based ALD.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.10
• /
• pp.12-19
• /
• 1993

Because of their high sensitivity and moderate bandwidth, superconducting receivers with SIS (Superconductor Insulator Superconductor) tunnel junction mixer are now widely used for millimeter wave radio astronomy. In this paper we have introduced how to determine the parameters of SIS tunnel junction which have to be optimized to achieve a good mixer performance. From these results of optimized junction parameters determined by this methods, SIS junctions which consist of a series array of four Nb/Al-AlOx/Nb junctions with each area 3.4${\mu}m^{2}$ have been fabricated by SNEP (Selective Niobium Etching Process) and RIE (Reactive Ion Eching). Also we have tested their DC current-voltage characteristics. These SIS junctions will be used as a mixer for 100GHz band cosmic waves receiver.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.90-98
• /
• 1996

We have evaluated the theoretical conversion loss and noise temperature of mixer using the quantum mixer theory and the method to determine the embedding impedance of waveguide-type mixer mount. At fixed backshort position of the mixer, the calculated SSB mixer conversion loss and mixer noise temperature are 5 dB and 10K within frequency range form 85 GHz to 115 GHz, respectively. The SIS mixer has been developed by using through on the calculated rsutls to observe cosmic radio waves. SIS junction of mixer is Nb/Al-AlOx/Nb and it consists of four series array. Area of each of junction is about 2.5${\mu}m^{2}$. The average receiver noise temperature of manufactured receiver with this mixer is about 30 K(DSB). The receiver noise temperature is much lower than that of receiver with a mixer using mechanical tuning backshort.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.202-210
• /
• 2001

Spin dependent tunneling (SDT) junction devices of Ta/NiFe/Ta/NiFe/FeMn/NiFe/AlOx/CoFe/NiFe/Al with in-situ naturally oxidized Al barrier were fabricated using ion beam deposition and dc sputtering in UHV chamber of 10$^{-9}$ Torr. The maximum tunneling magnetoresistance (TMR) and the product resistance by junction (R$_{j}$ A) are 16-17% and 50-60 $\Omega$${\mu}{\textrm}{m}$$^2$, respectively. The values of TMR and (R$_{j}$ A) with field annealing were slightly increased. The TMR and (R$_{j}$ A) dependence versus the junction area size was observed. These results were explained by using sheet resistance effect of bottom electrode and spin channel effects.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.53-58
• /
• 2022

Here, the surface characteristics of the dielectric were controlled by introducing the self-assembled monolayers (SAMs) as the intermediate layers on the surface of the AlOx dielectric, and the electrical performances of the organic charge modulated transistor (OCMFET) were significantly improved. The organic intermediate layer was applied to control the surface energy of the AlOx gate dielectric acting as a capacitor plate between the control gate (CG) and the floating gate (FG). By applying the intermediate layers on the gate dielectric surface, and the field-effect mobility (μ_OCMFET) of the OCMFET devices could be efficiently controlled. We used the four kinds of SAM materials, octadecylphosphonic acid (ODPA), butylphosphonic acid (BPA), (3-bromopropyl)phosphonic acid (BPPA), and (3-aminopropyl)phosphonic acid (APPA), and each μ_OCMFET was measured at 0.73, 0.41, 0.34, and 0.15 cm2V-1s-1, respectively. The results could be suggested that the characteristics of each organic SAM intermediate layer, such as the length of the alkyl chain and the type of functionalized end-group, can control the electrical performances of OCMFET devices and be supported to find the optimized fabrication conditions, as an efficient sensing platform device.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.483-486
• /
• 2021

Catalytic ozonation of methyl ethyl ketone (MEK) has been examined over mesoporous MnO_x/Al₂O₃ (MA) catalysts developed by a solvent deficient method using two different manganese precursors including manganese chloride (C) and manganese sulfate (S) at room temperature. The maximum catalytic activities of MA with C (MEK removal efficiency and ozone decomposition of 98.4 and 93.7%, respectively) were higher than those of MA with S (MEK removal efficiency and ozone decomposition of 96 and 68%, respectively). Also the catalytic stability of MA with C was much higher than that of MA with S. The physico-chemical properties of catalysts are well correlated with the activity results, which confirmed that fine dispersion of MnO_x species with high ratios of Mn³⁺/Mn⁴⁺ and more acid sites are attributed to the higher catalyst stability for the MA-C catalyst.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.194-195
• /
• 2012

박막 실리콘 태양전지에 입사한 빛 중 흡수층인 진성 비정질 실리콘층(i-a-Si)에 흡수된 빛은 출력으로 변환되나, 기타의 층에서 흡수된 빛은 손실 성분이 된다. 이 중 흡수 손실이 큰 층은 도핑 층(p-a-SiC 및 n-a-Si)들인데, 이 들의 흡수 손실을 측정된 광학함수를 이용해 계산해 보면 Fig. 1과 같이 나타난다. p-a-SiC은 광 입사부에 위치하여 단파장 영역의 흡수 손실을 일으키고, n-a-Si 은 태양전지의 후면에 위치하여 장파장 영역의 흡수손실을 일으킨다. 이러한 도핑층에서의 흡수 손실을 제거 또는 개선하기 위해 도핑층의 재료를 기존 재료보다 광학적 밴드갭이 큰 재료로 대체하여 개선하는 방안에 대해 논하고자 한다. 금속 산화물의 밴드갭은 실리콘 화합물에 비하여 대체로 큰 값을 가지기 때문에 이를 기존의 실리콘 화합물 대신으로 사용한다면 광학적 흡수 손실을 효과적으로 줄일 수 있다. 단, 이때 태양전지의 광 전압을 결정하는 인자가 p층과 n층 사이의 일함수 차이에 해당하므로, p층의 대체층으로 사용 가능한 금속 산화물은 일함수가 큰(＞5 eV) 재료 중에서 선택하는 것이 적합하며, n층의 대체층으로 사용 가능한 금속 산화물은 일함수가 작은(＜ 4.2 eV) 재료 중에서 선택하는 것이 적합하다. Table 1에서 p층과 n층 대체용 금속산화물의 후보들을 정리하였다. 먼저 도핑층에서의 광 흡수가 광손실이 될 수 밖에 없는 물리적 근거에 대해서 논하고, 그 실험적인 증명을 제시한다. 이러한 개념을 바탕으로 도핑층의 내부 전기장의 방향을 제어하여 전자-정공쌍을 분리 수집하는 방법을 실험적으로 구현하였다. 이어서 금속 산화물을 부분적으로 대체하여 흡수 손실을 개선하는 방안을 제시한다. WOx, NiOx, N doped ZnO 등을 적용하여 그 효과를 비교 검토하였다. 끝으로 금속산화믈 대체 또는 쇼트키 접합을 적용하여 도핑층의 광 흡수를 줄이고 효율을 향상하는 방안을 제시한다. 그 사례로서 WOx, MoOx, LiF/Al의 적용결과를 살펴보고 추가 개선방안에 대해 토의할 것이다. 결론적으로 광학적 밴드갭이 큰 재료를 도핑층 대신 사용하여 흡수 손실을 줄이는 것이 가능하다는 것을 알 수 있고, 이 때 일함수 조건이 만족이 되면 광 전압의 손실도 최소화할 수 있다는 점을 확인할 수 있었다. 현재까지 연구의 한계와 문제점을 정리하고, 추가 연구에 의한 개선 가능성 및 실용화 개발과의 연관관계 등을 제시할 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.136-136
• /
• 2011

반도체 및 전자기기 산업에 있어서 NVM은 아주 중요한 부분을 차지하고 있다. NVM은 디스플레이 분야에 많은 기여를 하고 있는데, 측히 AMOLED에 적용이 가능하여 온도에 따라 변하는 구동 전류, 휘도, color balance에 따른 문제를 해결하는데 큰 역할을 한다. 본 연구에서는 bottom gate 구조의 nc-Si NVM 실험을 진행하였다. P-type silicon substrate (0.01~0.02 ${\Omega}-cm$) 위에 Blocking layer 층인 SiO2 (SiH4:N2O=6:30)를 12.5nm증착하였고, Charge trap layer 층인 SiNx (SiH4:NH3=6:4)를 20 nm 증착하였다. 마지막으로 Tunneling layer 층인 SiOxNy은 N2O (2.5 sccm) 플라즈마 처리를 통해 2.5 nm 증착하였다. 이러한 ONO 구조층 위에 nc-Si을 50 nm 증착후에 Source와 Drain 층을 Al 120 nm로 evaporator 이용하여 증착하였다. 제작한 샘플을 전기적 특성인 Threshold voltage, Subthreshold swing, Field effect mobility, ON/OFF current ratio, Programming & Erasing 특성, Charge retention 특성 등을 알아보았다.