• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.65-70
• /
• 2006

We fabricated $YBa_2Cu_33O_{7-x}$(YBCO) films on(00l) $LaAlO_3$ substrates prepared by metal organic deposition(MOD) method using trifluoroacetate(TFA) solution and evaluated the effects of the humidity on the microstructure, phase purity, and critical properties. The films calcined at $430^{\circ}C$ were fired at $775^{\circ}C$ at 0%, 4.2%, 12.1%, and 20.0% humidified As gas mixed with 0.1% $O_2$. We observed that the amount of $BaF_2$ phase was effectively reduced and that a sharp and strong biaxial texture formed under a humidified atmosphere, leading to increased critical properties. For the films fired at 0% humidity, the $T_c\;and\;I_c$ were undetectably small. When the humidity was increased to 4.2%, the corresponding $T_c$(onset) and $I_c$ were increased to 90.5 K and 8 A/cm-width, respectively. For the films at the humidity range of 12.1-20.0%, the $I_c$ was found to be 35 A/cm-width. According to the results of the XRD, pole-figure, and SEM, these improved critical properties are probably attributed to the formation of a purer YBCO phase, larger grain size, and stronger c-axis orientation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.1
• /
• pp.38-49
• /
• 1986

In order to improve effectiveness of rhizobia-legume symbiotic nitrogen fixation, ecological and physiological characteristics of indigenous rhizobia distributed in Korea soil, that is, the effects of soybean cultivation, physico-chemical properties and climate on the population of indigenous rhizobia and other soil microbes were investigated. The results were summarized as follows: The population of indigenous rhizobia were ranged from $5.1{\times}10^4$ cells to $196.8{\times}10^4$ cells per gram of soil in soybean cultivated soils but from $1.6{\times}10^4$ cells to $78.6{\times}10^4$ cells per gram of soil in soybean un-cultivated soils sampled from 9 different agro-climate zone. The highest population was observed in a soybean cultivated loamy soil from southern part of Korea. The content of available phosphate, exchangeable Ca, Mg, Cu, and B in soil were positively correlated but active Fe, exchangeable Al, Na, and $SO_4$ were inversely correlated to the population of indigenous rhizobia. The inverse relationship was observed between the number of indigenous rhizobia and actinomycetes.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.75-84
• /
• 2010

This study was performed to investigate change in chemical composition of Acer mono saps collected in Hamyang, Inje, Namyangju and Yeongwol depending on storing period. pH of A. mono sap was in the range of 4.43~5.68, and it was decreased rapidly with the increase of storing period. A. mono sap collected in Yeongwol in Feb. 22 contained 2.06% sucrose. Degradation of sucrose was occurred when storing period was extended, and it caused production of organic acid like pyruvic acid, lactic acid, acetic acid and ethanol. Detected minerals in A. mono sap were K, Ca, Na, Mg, P, Si, Al, Mn, Fe, Cu and Zn, however, K and Ca content reached 93%. A. mono sap collected in Inje in Mar. 03 contained 131.72 mg/${\ell}$, which was especially high K content among the A. mono sap. 1.55~3.50 mg/${\ell}$ of Ascorbic acid was found in the A. mono sap. Sap collected in early date was less degraded.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.157-169
• /
• 2010

This study focused on the material characteristics and archaeometric relationship between the molten glass and bronze materials within the crucibles and gilt-bronze Bodhisattva statue excavated from the Ssangbukri site in Buyeo, Korea. Yellowish green to red brown vitreous material in the crucibles was identified as lead glass which contained scarce amount of BaO, and low $Al_2O_3$ and CaO. Metallic molten material was identified as bronze of copper-tin-lead alloy with low amount of impurities that indicated well-refined materials. Also, cassiterite was used for raw metal ore of tin. The Bodhisattva statue consisted of major copper with trace impurities in the core metal, and gold amalgam in the gilded layer. Though lead isotopic analysis showed contradictory results in each lead glass, bronze and Bodhisattva statue that required further examination, it could be stated that the statue was made in the Ssangbukri site based on the high-level technical skills of bronze production.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.67-71
• /
• 2013

$FeCl_3$ has been used as an etchant for metal etching such as Fe, Cu, and Al. In the process of metal etching, $Fe^{3+}$ is reducted to $Fe^{2+}$ and the etching rate becomes slow and etching efficiency decreased. Waste $FeCl_3$ etchant needs to be regenerated because of its toxicity and treatment cost. In this work, HCl was initially mixed with the waste $FeCl_3$ and then, strong oxidants, such as $O_2$ and $H_2O_2$, were added into the mixed solution to regenerate the waste etchant. During successive etching and regeneration processes, oxygen-reduction potential (ORP) was continuously measured and the relationship between ORP and etching capability was investigated. Regenerated etchant using a two vol% HCl of the total etchant volume and a very small amount of $H_2O_2$ was very effective in recovering etching capability. During the etching-regeneration process, the same oxygen-reduction potential variation cannot be repeated every cycle since concentrations of $Fe^{2+}$ and $Fe^{3+}$ ions were continuously changed. It suggested that the control of etching-regeneration process based on the etching time becomes more efficient than that of the process based on oxygen reduction potential changes.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.590-603
• /
• 2006

Size-and time-resolved aerosol samples were collected using an eight-stage Davis rotating unit for monitoring (DRUM) sampler from 23 March to 29 April 2001 at Gosan, Jeju Island, Korea, which is one of the super sites of Asia-Pacific Regional Aerosol Characterization Experiment(ACE-Asia). These samples were analyzed using synchrotron X-ray fluorescence for 3-hr average concentrations of 19 elements including Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, and Pb. The size-resolved data sets were then analyzed using the positive matrix factorization(PMF) technique to identify possible sources and estimate their contributions to particulate matter mass. PMF analysis uses the uncertainty of the measured data to provide an optimal weighting. Twelve sources were resolved in eight size ranges($0.09{\sim}12{\mu}m$) and included continental soil, local soil, sea salt, biomass/biofuel burning, coal combustion, oil combustion, municipal incineration, nonferrous metal source, ferrous metal source, gasoline vehicle, diesel vehicle, and volcanic emission. The PMF result of size-resolved source contributions showed that natural sources represented by local soil, sea salt, continental soil, and volcanic emission contributed about 79% to the predicted primary particulate matter(PM) mass in the coarse size range ($1.15{\sim}12{\mu}m$) while anthropogenic sources such as coal combustion and biomass/biofuel burning contributed about 58% in the fine size range($0.56{\sim}2.5{\mu}m$). The diesel vehicle source contributed mostly in ultra-fine size range($0.09{\sim}0.56{\mu}m$) and was responsible for about 56% of the primary PM mass.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.143-154
• /
• 2018

This study was performed in order to suggest useful data for color planning of eco-friendly and sensible fashion products. Silk fabrics were dyed in combination with natural indigo and Japanese pagoda tree and were treated with four kinds of mordants after combination dyeing. Then, their colorimetric properties were evaluated. From these composite-dyed silk fabrics, color sensibilities and color preferences of green yellow (GY) color were evaluated among the female university students, and thus, the influences of colorimetric properties and color sensibilities on color preferences were analyzed. When the silk fabrics were dyed in the combination of natural indigo and Japanese pagoda tree and were treated without mordants, they turned green color when indigo 10 g/L was used, and blue-green when indigo 20 g/L was added. And when they were dyed in combination of natural indigo and Japanese pagoda tree and were treated with four kind of mordants after combination dyeing, they turned GY color in almost all cases. The color sensibilities of the GY silk fabrics with the combination dyeing of indigo and Japanese pagoda tree, were classified into three factors: pleasantness, gracefulness, and comfort. Color sensibility factors showed significant differences according to the concentration of indigo and the kinds of mordants. There were almost significant relationships between colorimetric properties and color sensibilities factors of compositely dyed GY silk fabrics. The color preferences of the GY fabrics, which were dyed in the combination of using natural indigo and Japanese pagoda tree and four kinds of mordants, were found to be predicted by the color sensibility in a regression model.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.819-825
• /
• 1995

Two sweet potato CV.(Ipomoea batatas) were examined, i.e. purple flesh sweet potato(PSP) and light yellow flesh sweet potato(LYSP) which varied in degree of sweetness. On a fresh weight basis, nitrogen free extract in cultivars ranged from $25.73{\sim}26.24%$ and PSP contained more crude fat than LYSP. Total amino acids of PSP and LYSP were 5676.57mg% and 4550.86mg%, respectively. Aspartic acid, serine, alanine and valine were the major components in sweet potatoes. Sulfur-containing amino acids are the first limiting amino acid in PSP. The major fatty acids in PSP and LYSP analyzed by GC were palmitic acid, linoleic acid. The content of the saturated fatty acid was less than that of the unsaturated fatty acid. Carbohydrate contents were $75.43{\sim}79.10%$ and neutral sugars contents were $67.22{\sim}64.85%$(dry wt). Two sweet potato CV. contained the most glucose of all neutral sugars. PSP contained 11.88% for uronic acid, 59.42% for starch. Free sugars of PSP(0.82%) was much less than that of LYSP(2.53%). The contents of thiamin, riboflavin and niacin were similar, and the ascorbic acid contents in PSP and LYSP were 63.4mg% and 48.7mg%(dry wt), respectively. Comparing the mineral content in PSP, K was the greatest element in concentration followed by mg, Ca, Na. The total dietary fiber(TDF) value was 13.43% in PSP, 9.79% in LYSP respectively. The ratio of soluble dietary fiber(SDF) content and insoluble dietary fiber(IDF) content to TDF content for PSP were 57.6%, 42.4%, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.1048-1054
• /
• 2014

The purpose of this study was carried out to investigate the cause of sulfur dioxide occurrence, general element composition, sulfur compounds, heavy metals, macro- & micro-minerals, and oxidation-reduction potential (ORP) following baking time course of RS (RS1, RS2, RS3, and RS4) and mudflat solar salts (MSS). Sulfur dioxide ($SO_2$) and sulfite ($SO{_3}^{2-}$) were not detected in MSS or RS. However, sulfate ($SO{_4}^{2-}$) content significantly decreased in RS (29,878.15~36,097.45 ppm) compared to that in MSS (35,601.65 ppm). ORP was 181.15 mV in MSS, and 58.55 mV in RS1. Moisture content was 9.34% in MSS and 0.00% in RS with increased NaCl (94.77~95.77%). Moisture and NaCl contents showed no significant difference in RS. Insoluble and sandy residues were higher in RS than in MSS, whereas Ca and K showed no significant difference. Mg and Cl contents were higher in RS than in MSS. Br level was higher in MSS (628.1 ppm) than in RS (512.72~586.62 ppm), but there was no significant difference in $NO_3$. Heavy metals (Pb, As, and Hg) were more abundant in RS than in MSS, but levels were still safe. These results suggest that MSS and RS may increase protection against from $SO_2$ and $SO{_3}^{2-}$.

• Clean Technology
• /
• v.23 no.2
• /
• pp.158-162
• /
• 2017

$FeCl_3$ solution has been used as an etchant for metal etching such as Fe, Cu, Al and Ni. In the etching process, $Fe^{3+}$ is reduced to $Fe^{2+}$ and the etching efficiency is decreased. Waste $FeCl_3$ etchant has environmental, economic problems and thus the regeneration of the etching solution has been required. In this study, HCl was mixed with the $FeCl_2$ solution and then, $H_2O_2$, $NaClO_3$ were added into the mixed solution to oxidize the $Fe^{2+}$. During the oxidation process, oxidation-reduction potential (ORP) was measured and the relationship between ORP and oxidation ratio was investigated. The ORP is increased with increasing the concentration of $H_2O_2$ and $NaClO_3$, and then the ORP is decreased with oxidation progress. Such a behavior was in good agreement with Nernst's equation. Also, the oxidation efficiency was about 99% when a sufficient amount of HCl and $H_2O_2$, $NaClO_3$ were added.