• 설비공학논문집
• /
• 제25권2호
• /
• pp.79-84
• /
• 2013

In this study, a cold aisle containment system was proposed among various strategies to reduce the energy waste by recirculation air from the hot aisle. To verify the effectiveness of the cold aisle containment system, a test bed which is similar to an actually existing server room was set up in the Internet Data Center(IDC) building. Comparative experiments, conventional open type cooling system and cold aisle containment system were carried out under actual conditions. The result revealed that the range of inlet temperature of the server system was $20{\sim}25^{\circ}C$ in an existing cooling system and the range of inlet temperature dropped below $20^{\circ}C$ by the cold aisle containment system. After all, cold aisle containment system was proved to be the solution for energy saving cooling system.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.726-733
• /
• 2016

본 연구에서는 기존 데이터센터 서버실에서 공기분배시스템으로 파티션 시스템의 적용성을 평가하기 위해 기존 시스템 그리고 파티션의 설치 높이와 위치를 변수로 하는 파티션 시스템과 컨테인먼트 시스템에 대해 총 21가지 경우의 컴퓨터시뮬레이션을 실시하고 다음과 같은 결론을 얻었다. 공기온도 및 기류 분포 해석결과를 이용하여 평가해 본 공기분배시스템별 냉방 에너지 절감 성능은 컨테인먼트 시스템, 파티션 시스템, 기존 시스템 순서로 우수한 것을 확인할 수 있었다. 기존 시스템과 파티션 설치높이 0.1~0.7m까지의 파티션 시스템은 재순환 공기에 의해 냉복도에서 1.0~1.2m 높이를 기점으로 공기 온도가 급격히 상승하면서 중간 높이의 서버와 상부 서버의 인입구 온도차는 $11{\sim}15^{\circ}C$로 큰 차이를 보여, 재순환 공기가 상부 서버의 과열의 원인을 제공하는 것으로 나타났다. 파티션 시스템에서 냉복도 상부에 파티션을 설치할 경우에 파티션의 적정 높이는 서버 랙 상부에서 천장까지 높이의 90%(0.9m)이상, 열복도 상부에 파티션을 설치하는 경우는 파티션 높이가 80%(0.8m)이상은 되어야 재순환 공기를 충분히 차단하여 서버 인입구 공기온도가 RCI 권장온도 범위를 만족하는 냉방 에너지 절감효과를 볼 수 있는 것으로 나타났다.

• 산업경영시스템학회지
• /
• 제26권3호
• /
• pp.58-66
• /
• 2003

The cut tree approach of Montreuil and Ratliff [16] and eigenvector approach [10] are used to automatically draw a feasible facility layout with aisle structure. The department arrangement can minimize an aisle distance criterion considering door locations and dimension constraints. The aisle distance is measured by the door to door distance between departments. An eigenvector and cut tree approaches [1] are implemented based on the branch and bound technique in Kim et al. [2] in order to obtain feasible layouts. Then, the algorithm to fix the door location of each department is developed. After the door locations are determined, the factory layout is evaluated in terms of aisle distance. The aisle structure is obtained by expanding the original layout. The solution is kept until we will find better factory layout. The proposed approach based on the branch and bound technique, in theory, will provide the optimal solution. If the runs are time and/or node limited, the proposed method is a strong heuristic. The technique is made further practical by the fact that the solution is constrained such that the rectangular shape dimensions length(l) and width(w) are fixed and a perfect fit is generated if a fit is possible.

• 산업경영시스템학회지
• /
• 제46권1호
• /
• pp.68-75
• /
• 2023

In an automotive plant, an automated storage and retrieval system (ASRS) synchronizes material handling flows from a part production line to an auto-assembly line. The part production line transfers parts on small-/large-sized pallets. The products on pallets are temporarily stored on the ASRS, and the ASRS retrieves the products upon request from the auto-assembly line. Each ASRS aisle is equipped with narrow-/wide-width racks for two pallet sizes. An ASRS aisle with narrow-/wide-width racks improves both storage space utilization and crane utilization while requiring delicate ASRS aisle design, i.e., the locations of the narrow-/wide-width racks in an ASRS aisle, and proper operation policies affect the ASRS performance over demand fluctuations. We focus on operation policies involving a common storage zone using wide-width racks for two pallet sizes and a storage-retrieval job-change for a crane based on assembly-line batch size. We model a discrete-event simulation model and conduct extensive experiments to evaluate operation policies. The simulation results address the best ASRS aisle design and suggest the most effective operation policies for the aisle design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.591-595
• /
• 1990

This paper describes a method of aisle following of a mobile robot using machine vision. As a navigation guide, Black strip painted on the lower part of wall of aisle is used. The offset of the vehicle position from the center of aisle and the heading angle are determined from the binary image of guide strip captured by a CCD camera. To remove the effect of noise. i.e. break of guide strip for the door or reflection of light, pixel sampling method together with consistency check of the incline for the sampled pixels is used.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.314-319
• /
• 2011

Energy Cost has been rapidly increased with the internal heat gain of data center to keep the temperature condition. But the cooling units for server systems are fully operated to satisfy the indoor temperature condition, it results in the excessive energy consumption. In this study, various cooling systems were studied for data center and cold aisle containment system was proved to be the best solution for server cooling system. Because it protects the cooling zone from the hot aisle space. Effective cooling and prohibition of recirculation air from hot aisle was possible by the cold aisle containment system.

• 설비공학논문집
• /
• 제22권4호
• /
• pp.205-212
• /
• 2010

In a typical data center, large numbers of IT sever racks are arranged multiple rows. IT environments, in which extensive electronic hardware is air-cooled, cooling system inefficiencies result when heated exhaust air from equipment prematurely mixes with chilled coolant air before it is used for cooling. Mixing of chilled air before its use with heated exhaust air results in significant cooling inefficiencies in many systems. Over temperatures may not only harm expensive electronic equipment but also interrupt critical and revenue generating services. Cool shield is a cost effective aisle partition system to contain the air in cold aisles and hot aisles of an IT server room. This paper focuses on the use of performance metrics for analyzing aisle partition system in data centers.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.109-115
• /
• 2016

This study examined the effects of safety-aisle on the safety climate, safety leadership, safety behavior, work loading and perceived accident risk in the small sawmilling industry. We distributed a questionnaire that measured various demographic variables, safety related variables by mail to 200 sawmilling companies. Finally 59 managers' and 129 workers' questionnaires were used for data analysis. An independent t-test was conducted to identify significant mean differences of safety related variables between safety-aisle installed and non-installed companies. Results indicated that mean differences of safety climate and safety behavior between safety-aisle installed and non-installed companies were significant. However, mean differences of safety leadership, work loading and perceived risk were not significant at the p < .05 level. Based on these results, the implications of this study and suggestions for future research were discussed.

• 대한산업공학회지
• /
• 제39권1호
• /
• pp.55-60
• /
• 2013

VNA(Very Narrow Aisle) forklift trucks require narrower aisle width than traditional counter-balanced trucks do because only the fork assembly turns in the aisle instead of the entire body of the truck. Substituting the VNA trucks for the existing counter-balanced trucks will result in the significant increase of revenue due to the increased storage capacity in the distribution centers. In this study, we present an economic analysis model for the substitution, in which we present a closed-form equation for the number of racks to stay unmoved, while maximizing the additional storage capacity; and resulting payback period of the substitution. A case study shows the payback period of only 8.1 months, indicating that this substitution is very profitable.

• Industrial Engineering and Management Systems
• /
• 제14권3호
• /
• pp.289-298
• /
• 2015

This paper analyses the best batch formations for order picking throughput in narrow-aisle order picking systems. Our analytical comparison finds that a high pick density variation leads to a heavy picker blocking. Simulation experiments show that a distance-based batching algorithm reduces picker blocking by decreasing the number of aisles visited and stabilizing the variation in number of picks per aisle by packing orders tightly, and that the solution quality and mechanism for determining the batch size dictated by the sorting strategy causes varying amounts of blocking. We conclude that combining a distance-based batching method with an appropriate batch sizing strategy will reduce picker blocking and shorten travel in narrow-aisle picking systems.