DOI QR코드

DOI QR Code

Server Room Temperature Condition in Data Center with Cold Aisle Containment System

냉복도 밀폐시스템을 적용한 서버실의 실내온도조건

  • Jung, Yong-Ho (Department of Building Equipment and Fire Protection System, Chungwoon University) ;
  • Chang, Hyun-Jae (Department of Architectural Engineering, Hongik University) ;
  • Seo, Jang-Hoo (Department of Architecture, Chosun University)
  • 정용호 (청운대학교 건축설비소방학과) ;
  • 장현재 (홍익대학교 건축공학과) ;
  • 서장후 (조선대학교 건축학부)
  • Received : 2012.12.21
  • Published : 2013.02.10

Abstract

In this study, a cold aisle containment system was proposed among various strategies to reduce the energy waste by recirculation air from the hot aisle. To verify the effectiveness of the cold aisle containment system, a test bed which is similar to an actually existing server room was set up in the Internet Data Center(IDC) building. Comparative experiments, conventional open type cooling system and cold aisle containment system were carried out under actual conditions. The result revealed that the range of inlet temperature of the server system was $20{\sim}25^{\circ}C$ in an existing cooling system and the range of inlet temperature dropped below $20^{\circ}C$ by the cold aisle containment system. After all, cold aisle containment system was proved to be the solution for energy saving cooling system.

Keywords

References

  1. ASHRAE, 2012, High density data centers case studies and best practices, Datacom series, Vol. 7, pp. 26-28.
  2. Cho, J. K., 2008, The Planning and Design of the Optimal Cooling System for IT Environments in (Internet) Data Centers, Journal of the Architectural Institute of Korea, Vol. 24, No. 12, pp. 313-320.
  3. ASHRAE, 2009, Design considerations for datacom equipment centers second edition, Datacom series, Vol. 3, pp. 82-96.
  4. Chang, H. J., Jung, Y. H., and Seo, J. H., 2012, Analysis of Cooling Energy Saving by Cold Aisle Containment System in Internet Data Center Server Room, Journal of Korean Institute of Architectural Sustainable Environment and Building Systems, Vol. 6, No. 3, pp. 181-190.
  5. ASHRAE, 2005, Transactions, Vol. 111, No. 2.