• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.317-327
• /
• 2013

Air pollution and artificial heat of urban areas have caused the urban heat island in which asphalt pavements absorb solar heat during the daytime and release the heat at night. Hence, in order to improve the environment of urban areas, it is necessary to examine cooling pavements that can reduce heat on road pavements in urban areas. The application of temperature insulation paints on road pavements require to reduce black brightness for visibility, to increase the reflection rate of infrared light and minimize the reflection rate of visible light. In the study, one part of Acrylic-emulsion was used as a main binder, and the changes in black brightness and the changes of addition ratio (0%, 15%, 30%) of hollow ceramics, as well as kinds of paints (carbon black pigment, mixed mineral pigment) were selected as the main experimental factors. The performance of temperature reduction of cooling pavements was analyzed through the reflection rate of spectrum, the reflection rate of solar heat, and the lamp test. Abrasion resistance, UV accelerated weather resistance, and sliding resistance were tested in real situations. In addition, the performance of heat reduction of testing pavements covered with high-reflection paints was analyzed by using an infrared camera. As the test results, when using mixed mineral paints and hollow ceramic of 30%, the reflection rate of spectrum was 43% in the area of near-infrared ray and 17% in the area of visible light at black brightness of $L^*$=42.89 and the reflection rate of solar heat was 27.5%. Total color difference was ${\Delta}E$=0.27 in the test of UV Accelerated Weather Resistance, indicating almost no changes in color. BPN was more than 53 when scattering #2 and #4 silica sand of more than $0.12kg/m^2$. In Taber's abrasion resistance test, abrasion loss was up to 86.4mg at 500 rotations. The performance of heat reduction was evaluated using an infrared camera at the test section applying high-reflection paints to asphalt pavements, in which the results showed that the temperature was reduced by $12.7^{\circ}C$ on CI-30-40 cooling pavements ($L^*$=38.76) and by $14.2^{\circ}C$ on CI-30-60 cooling pavements ($L^*$=57.12).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.3
• /
• pp.22-30
• /
• 2013

This study aims to measure the thermal comfort effects of urban street trees. As the usual dry bulb air temperature does not indicate properly how the average pedestrian feels the heat of a typical summer day under the strong sunshine, we adopted the Wet Bulb Globe Temperature(WBGT). WBGT involves black globe temperature to measure the direct radiation of sun beams on our bodies, for example our heads. We measured temperatures on very sunny and hot summer days, August 3, 4, and 7, 2012, on the urban streets of Seoul, Korea. Wet bulb, globe, and dry bulb temperatures were measured under direct sunlight from 1 O'clock to 5 O'clock pm. Globe and dry bulb temperatures were measured under street tree shades nearby during the same hours. Then the WBGTs were calculated with the formulae, one for sunny outdoor spaces, and the other for shaded outdoor spaces or indoor. The results are compared with the Korean Standards Association(KS A ISO 7243). The major findings were: 1) On very sunny and hot summer days in Seoul, street tree shades lower the WBGT about 1 to 4 degrees, 2) during the hours of 3 and 4 O'clock in the afternoon, the WBGT under the tree shades are about 3 to 4 degrees lower compared to those under sunshines(approx. 29 to 32 degrees respectively), 3) This difference makes a major thermal comfort for urban pedestrians because senior citizens or weak persons are recommended to move indoor, and even healthy people are recommended stop outdoor sports and take rests in the shades when WBGT is about 32. On the other hand, if the WBGT is around 29, or 3 degrees lower, slower walking, light works or sports are allowable, 4) On site questionnaire survey confirms the thermal comforts under the tree shades, and we even could not get survey subjects on the sunny parts of the sidewalks, 5) We strongly recommend change of guidelines for urban street trees from "one row of street trees on 6m~8m intervals" to "street trees to make continuous shades".

• The Korean Journal of Malacology
• /
• v.32 no.3
• /
• pp.175-184
• /
• 2016

In this study, we transplanted Chinese (Liaoning Dandong) and Chungnam (Taean) manila clam seeds to Gochang tidal flats in Jeonbuk province, and compared growth, mortality, and condition indices from May 2015 to August 2016. Within 2 months after transplantation, clam mortality of Chungnam and Chinese origin were $6.9{\pm}4.3%$, $16.9{\pm}7.9{\sim}21.0{\pm}6.3%$, respectively. We supposed that higher mortality of Chinese manila clams might be due to higher stress and weakening of physiological functions by air-exposure and unavailability of food intake for 5 days harvesting, transportation, quarantine procedures. Unlike the local clam farmer's opinion based on their field experience, growth of Chungnam clams in shell length and total weight were a little better than Chinese without statistical significant difference (P > 0.05). Condition indices of Chinese clams showed declining tendency after reaching a peak in May 2014, and in June 2015, respectively. Meanwhile, Chungnam clams has reached its peak of condition indices in May 2014 and in April 2015, respectively. From this result, we supposed that there might be at least one month difference in reproduction between the Chinese and Chungnam manila clams during the first-transplanted year. Because the mortality of adult clam have sharply increased from June 2015 (due to high temperature, few rainfall and spawning) in Gochang tidal flat, it would be recommendable that farmers harvest the clams before June when its shell length are larger than 40 mm. In conclusion, we could directly compare the productivity of Chinese and Chungnam manila clam at Gochang tidal flats by field experiment, and these results are also meaningful to manila clam farmers.

• Analytical Science and Technology
• /
• v.16 no.4
• /
• pp.299-308
• /
• 2003

The purpose of this study is to investigate cadmium concentrations among metals in ETS (Environmental Tobacco Smoke) of indoor environments and to evaluate the cadmium as a marker of ETS. The correlations of cadmium concentrations and nicotine, 3-EP, RSP, SD (Smoking Density), and SI (Smoking Index). Air samples of metals, nicotine, 3-EP, and RSP were taken in smoking room, smoking allowed office, corridor outside smoking room, and non-smoking office respectively. The SD, ACH, and SI were investigated during sampling. Airborne concentration of cadmium known as human carcinogen were qualified and quantified. The SD was 0.2 to $2.6cig/m^2{\cdot}hr$, and the mean value of SD in smoking rooms was $1.2cig/m^2{\cdot}hr$ that is higher than other researches. The mean of ACH in smoking rooms was 11.1. The concentrations of cadmium showed log-normal distributions and the geometric mean concentrations of cadmium in smoking rooms, corridor outside smoking rooms, smoking allowed offices, and non-smoking offices were $0.045{\mu}g/m^3$, $0.018{\mu}g/m^3$, $0.021{\mu}g/m^3$, and $0.017{\mu}g/m^3$ respectively. The concentrations of cadmium in smoking room showed significant difference according to category of indoor office environments (p<0.05) and showed compliance with occupational exposure limits. The correlation coefficients between cadmium and nicotine, 3-EP, and RSP were 0.53, 0.41, 0.43 respectively. The cadmium among metals showed the highest correlations (r=0.63) with SI. It was recommended cadmium among metals is a good indicator for ETS.

• Journal of the Korean earth science society
• /
• v.38 no.4
• /
• pp.283-292
• /
• 2017

In this study, the empirical models were established to estimate the concentrations of surface-level $PM_{2.5}$ over Seoul, Korea from 1 January 2012 to 31 December 2013. We used six different multiple linear regression models with aerosol optical thickness (AOT), ${\AA}ngstr{\ddot{o}}m$ exponents (AE) data from Moderate Resolution Imaging Spectroradiometer (MODIS) aboard Terra and Aqua satellites, meteorological data, and planetary boundary layer depth (PBLD) data. The results showed that $M_6$ was the best empirical model and AOT, AE, relative humidity (RH), wind speed, wind direction, PBLD, and air temperature data were used as input data. Statistical analysis showed that the result between the observed $PM_{2.5}$ and the estimated $PM_{2.5}$ concentrations using $M_6$ model were correlations (R=0.62) and root square mean error ($RMSE=10.70{\mu}gm^{-3}$). In addition, our study show that the relation strongly depends on the seasons due to seasonal observation characteristics of AOT, with a relatively better correlation in spring (R=0.66) and autumntime (R=0.75) than summer and wintertime (R was about 0.38 and 0.56). These results were due to cloud contamination of summertime and the influence of snow/ice surface of wintertime, compared with those of other seasons. Therefore, the empirical multiple linear regression model used in this study showed that the AOT data retrieved from the satellite was important a dominant variable and we will need to use additional weather variables to improve the results of $PM_{2.5}$. Also, the result calculated for $PM_{2.5}$ using empirical multi linear regression model will be useful as a method to enable monitoring of atmospheric environment from satellite and ground meteorological data.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.582-587
• /
• 2011

Holdup characteristics of bubble, wake and continuous liquid phases were investigated in bubble columns with viscous liquid media. Effects of column diameter(0.051, 0.076, 0.102 and 0.152 m ID), gas velocity($U_G$=0.02~0.16 m/s) and liquid viscosity(${\mu}_L$=0.001~0.050 $Pa{\cdot}s$) of continuous liquid media on the holdups of bubble, wake and continuous liquid phases were discussed. The three phase such as bubble, wake and continuous liquid phases were classified successfully by adapting the dual electrical resistivity probe method. Compressed filtered air and water or aqueous solutions of CMC(Carboxy Methyl Cellulose) were used as a gas and a liquid phase, respectively. To detect the wake as well as bubble phases in the bubble column continuously, a data acquisition system(DT 2805 Lab Card) with personal computer was used. The analog signals obtained from the probe circuit were processed to produce the digital data, from which the wake phase was detected behind the multi-bubbles as well as single bubbles rising in the bubble columns. The holdup of bubble and wake phases decreased but that of continuous liquid media increased, with an increase in the column diameter or liquid viscosity. However, the holdup of bubble and wake phases increased but that of continuous media decreased with an increase in the gas velocity. The holdup ratio of wake to wake to bubble phase decreased with an increase in the column diameter or gas velocity, however, increased with an increase in the viscosity of con-tinuous liquid media. The holdups of bubble, wake and continuous liquid media could be correlated in terms of operating variables within this experimental conditions as: ${\varepsilon}_B=0.043D^{-0.18}U_G^{0.56}{\mu}_L^{-0.13}$, ${\varepsilon}_W=0.003D^{-0.85}U_G^{0.46}{\mu}_L^{-0.10}$, ${\varepsilon}_C=1.179D^{0.09}U_G^{-0.13}{\mu}_L^{0.04}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.5
• /
• pp.211-216
• /
• 2018

The recovery of rare earth elements (REE) including La, Nd and Ce from spent batteries is important issues to reuse scarce resources. Herein, we present a simple recovery process to obtain lanthanum oxide ($La_2O_3$) from spent Ni-MH batteries, and demonstrate the conversion mechanism from $NaLa(SO_4)_2{\cdot}H_2O$ to $La_2O_3$. This strategy requires the initial preparation of $NaLa(SO_4)_2{\cdot}H_2O$ and subsequent metathesis reaction with $Na_2CO_3$ at $70^{\circ}C$. This metathesis reaction resulted in the crystalline lanthanum carbonate hydrate ($La_2(CO_3)_3{\cdot}xH_2O$) powder with plate-like morphology. On the basis of TGA result, the $La_2(CO_3)_3{\cdot}xH_2O$ powder was calcined in air at three different temperatures, that is, $300^{\circ}C$, $500^{\circ}C$, and $1000^{\circ}C$. As the calcination temperature increased, the morphology of powder was changed; prism-like ($NaLa(SO_4)_2{\cdot}H_2O$) ${\rightarrow}$ platelike ($La_2(CO_3)_3{\cdot}xH_2O$) ${\rightarrow}$ aggregated irregular shape ($La_2O_3$). Futhermore, XRD results indicated that the crystalline $La_2O_3$ could be synthesized after the metathesis reaction with $Na_2CO_3$, followed by heat-treatment at $1000^{\circ}C$, along with a change of crystallographic structures; $NaLa(SO_4)_2{\cdot}H_2O$ ${\rightarrow}$ $La_2(CO_3)_3{\cdot}xH_2O$ ${\rightarrow}$ $La_2O_3$.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.675-687
• /
• 2005

The rocks of the five storied stone pagoda in the Jeongrimsaji temple site are 149 materials in total with porphyritic biotite granodiorite. They include pegmatite veinlet, basic xenolith and evenly developed plagioclase porphyry. This stone pagoda has comparably small fracture and cracks which are farmed in the times of rock properties, but surface exfoliation and granular decomposition are in process actively since the rocks are generally weakened from the influence of air contaminants and acid rain. Structural instability of constituting rocks in the 4th roof materials are observed to occur from distortion and tilt. Such instability is judged to threat stability of the upper part of the stone pagoda. Also, chemical weathering is operating even more as the contaminants, ferro-manganese hydroxides eluted from water-rock interaction on the rock surface. Most of the rock surface is covered with yellowish brown, dark black and light gray contaminants, and especially occur in the lower part of the roof rocks on each floor. The roof underpinning rocks are severe in surface pigmentation from manganese hydroxides and light gray contaminants. The surface of rocks lives bacteria. algae, lichen, or moss and diverse productions in colors of light gray, dark Bray and dark green. Grayish white crustose lichen grows thick on the surface with darkly discolored by fungi and algae in the first stage on basement rocks, and weeds grows wild on the upper part of each roof rocks. This stone pagoda must closely observe the movements of the upper part rock materials through minute safety diagnosis and long term monitoring for structural stability. Especially since the surface discoloration of rocks and pigmentation of secondary contaminants are severe, establishment of general restoration and scientific conservation treatment are necessary through more detailed study for this stone pagoda.

• Journal of Embryo Transfer
• /
• v.20 no.1
• /
• pp.55-62
• /
• 2005

This study was undertaken to access the effect of collection methods on the collection efficiency, blastocyst rate and pregnancy rate after IVP embryo transfer. The ovaries of Hanwoo were obtained from an abattoir and kept on 25 to $28^{\circ}C$ and transported to laboratory within 4 hrs. The oocytes were collected by aspiration of follicles $(2\~6\;mm)$ with or without slicing of ovaries after aspiration. The oocytes were matured in vitro (IVM) for 20 to 24 hrs in TCM-199 supplemented with $10\%$ fetal bovine serum at $39^{\circ}C$ under $5\%\;CO_{2}$ in air. Following routine IVM/IVF procedure, the oocytes and presumed zygotes were cultured for three day in CRlaa medium with BSA. The cumulus cells at 2 to 8-cell stage of embryos removed then the embryos and were cultured in CRlaa medium containing $10\%$ fetal bovine serum in $5\%\;CO_{2}$ at $39^{\circ}C$. The fresh blastocysts cultured for 7 to 9 days were transferred into recipients. The numbers of oocytes recovered form two different methods, the aspiration and slicing after aspiration, were compared to know what. The number of oocytes per ovary was 8.2 and 6.5 in aspiration combining slicing, and aspiration groups, respectively (p<0.05). The cleavage rate in aspiration method are significantly (p<0.05) high than those in slicing post aspiration $(27.9\%)$, and aspiration $(25.5\%)$. The pregnancy .ate in aspiration method $(62.5\%)$ was high than that in slicing method after aspiration $(54.4\%)$. The pregnancy rates of aspiration method and slicing method after aspiration in nullipara $(58.1\%\;vs\;68.2\%)$ was high than that in pluripara $(49.5\%\;vs\;53.2\%)$. The results obtained that the increased number of oocytes per ovary in slicing method after aspiration could be better than that in aspiration method. Pregnancy rate in aspiration method was slightly higher in than that in slicing method after aspiration.

• Journal of Environmental Policy
• /
• v.5 no.1
• /
• pp.45-70
• /
• 2006

China has achieved great economic growth above 9% annual since it changed to more of a market economy system by its reform and open-door policy. At the same time, China has experienced severe ecological deterioration, such as air and water pollutions caused by its rapid urbanization and industrialization. China is now confronted with environmental pollution and ecological deterioration at a critical point, at which economic development in China is limited. Moreover, environmental problems in China have become a lit fuse for social fluctuation beyond pollution problems. The root and background of environmental problems in China, firstly, are its government's lack of understanding of these problems and incorrect economic policies affected by political and ideological prejudice. Secondly, the plundering of resources, 'the principle of development first' which didn't consider environmental sustainability is another source of environmental deterioration in China. In addition, a huge population and poverty in China have increased the difficulty in solving its environmental problems, and in fact have accelerated them. The Chinese government has established many environmental laws and institutions, increased environmental investments, and is enlarging the participation of NGOs and the general public in some limited scale to solve its environmental problems. However, it has not obtained effective results because of the lack of environmental investments owing to the government's limit of the development phase, a structural limit of law enforcement and local protectionism, and the limit of political independency in NGOs and the lack of public participation in China. It seems that China remains in the stage of 'economic development first, environmental protection second', contrary to its catch-phrase of 'the harmony between economic development and environmental protection'. China is now confronted with dual pressure both domestically and abroad because of deepening environmental problems. There are growing public's protests and demonstrations in China in response to the spread of damage owing to environmental pollution and ecological deterioration. On the other hand, international society, in particular neighboring countries, regard China as a principal cause of ecological disaster. In the face of this dual pressure, China is presently contemplating a 'recycling economy' that helps sustainable development through the structural reform of industries using too much energy and through more severe law enforcement than now. Therefore, it is desirable to promote regional cooperation more progressively and practically in the direction of building China's ability to solve environmental problems.