• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.30-39
• /
• 2001

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced by the high pressure injector is of paramount importance in DISI(Direct Injection Spark Ignition) engines in that the primary atomization process must meet the requirement of quick and complete evaporation, mixing with air and combustion especially to prohibit the excessive HC emissions. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engine. The direct Mie scattered and shadowgraph images presented the macroscopic view of the liquid sprays and vapor fields. The velocity and particle size of fuel droplets were investigated by phase doppler anenometer(PDA) system. The processes of atomization and evaporation with a DISI injector were observed and consequently utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• 한국분무공학회지
• /
• 제10권3호
• /
• pp.38-44
• /
• 2005

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced from the injector of DIS(Direct Injection Spark Ignition) engine is of paramount importance in DISI engines. Fan-spray injector as well as swirl-spray injector was developed and utilized to the DISI engines. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engineer. The direct Mie scattered images presented the macroscopic view of the liquid spray fields interacted with crossflow. Particle sizes of fuel droplets were measured with phase Doppler anemometer(PDA) system. A faster cross-flow field made SMD larger and $D_{10}$ smaller. The experiments show the interaction of air flow field and the fuel spray field of fan-spray. The results can be utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• 한국터널지하공간학회 논문집
• /
• 제8권4호
• /
• pp.335-344
• /
• 2006

국내에서 제트팬 설치 간격 기준으로 사용되고 있는 일본도로공단 기준은 제트팬의 구경에 따라 설치간격을 제시하고 있지만 국제 상설도로 협회(PIARC)에서는 터널 직경에 10배를 유지할 것을 권장하고 있다. 이 기준들에 의해 결정된 설치 간격은 최대 약 2배 정도의 차이를 나타내고 있으며 이러한 설치 간격의 차이는 터널 환기 방식 선정에 불리한 요건으로 작용될 수 있기 때문에 터널 내부의 기류분석을 통한 적정 설치 간격 기준이 필요하다. 본 논문에서는 Froude 상사이론에 기초하여 아크릴 재질의 축소비 1/40의 모형 터널(직경 215mm, 연장 6.9m)과 모형 제트팬(구경 26.3mm, 31.6mm)을 제작하여 터널 내부에서의 기류분석을 위해 터널연장을 따라서 압력과 속도의 변화를 측정하였고, 제트팬 가동시 제트팬 주위에서 외부 공기의 영향으로 발생될 수 있는 재유입 현상을 확인하기 위해서 제트팬 주변에서 압력변화를 측정하였다. 모형실험 결과에서는 터널 내부기류는 제트팬 구경에 영향을 받지 않고 터널직경에 약 9배 정도가 되는 지점에서 압력과 속도의 변화가 안정되는 것으로 나타났으며 제트팬이 가동되면서 발생되는 재유입 현상을 확인할 수 있었다. 이러한 결과를 통해 터널 내부에서의 제트팬 설치 시에는 터널 직경에 약9배 이상을 확보해야 한다고 판단된다.

• 한국전산유체공학회지
• /
• 제8권1호
• /
• pp.1-7
• /
• 2003

The present study has conducted the analysis of flows in a blower with double suction. The air handling system is for supplying air flows into a plant. The present system has a couple of impellers in axial direction for enhanced flow rate. Main interest lies on the improvements of static pressure rise and total efficiency of the system. The present treatment of the reform is to secure a spatial distance between the fan and the casing of the system and change the shape of the cut-off part. The resultant performance after the reform shows increased pressure-rise and efficiency of the system

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1403-1412
• /
• 1997

When a high-speed railway train enters a tunnel, a compression wave is generated ahead of the train and propagates through the tunnel, compressing and accelerating the rest air in front of the wave. At the exit of the tunnel, an impulsive wave is emitted outward toward the surrounding, which causes a positive impulsive noise like a kind of sonic boom produced by a supersonic aircraft. With the advent of high-speed train, such an impulsive noise can be large enough to cause the noise problem, unless some attempts are made to alleviate its pressure levels. In the purpose of the impulsive noise reduction, the present study calculated the effect of porous walls on the compression wave propagating into a model tunnel. Two-dimensional unsteady compressible equations were differenced by using a Piecewise Linear Method. Calculation results show that the cavity/porous wall system is very effective for a compression wave with a large nonlinear effect. The porosity of 30% is most effective for the reduction of the maximum pressure gradient of the compression wave front. The present calculation results are in a good agreement with experimental ones obtained previously.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.338-343
• /
• 2008

Fracture characteristics of plates and dome shapes for machinable glass ceramics using compressed shock wave. Machinable glass ceramics have been considered as a promising candidate material for the dome port cover of air breathing engine. This part of the air breathing engine has an important role separating solid and liquid fuel, and needs the frangible characteristics whereby the fracture of a part should not affect the internal components of combustion. The objective of this study are to evaluate the fracture pressure and phenomena of separated membrane using a shock tunnel. The experimental apparatus consists of driver, a driven section and a dump tank. The used material is machinable glass ceramic from Corning company. Specimens are used 3, 4.5 and 6mm thickness with plates and dome shapes. It is expected that the results obtained from this study can be used in the basic data for the dome port cover design of an air breathing engine.

• 한국농림기상학회지
• /
• 제2권3호
• /
• pp.87-94
• /
• 2000

지역과 육묘시기에 알맞은 기계이앙상자육묘 보온못자리의 피복자재와 못자리양식을 선정하기 위하여 PE 필름터널, 부직포터널. 부직포평상 못자리에 대한 상내미기상과 외부기상의 영향을 조사하였다. 1. 맑은 날 포차(vapor pressure deficit)는 낮에는 대기보다 부직포터널과 PE필름터널의 내부가 더 컸고, 흐리거나 비가 온 날은 낮에 부직포터널이 PE필름터널이나 외부보다 컸다. 2. 하루동안 지중열류량은 PE필름터널, 부직포평상, 부직포터널 순으로 대기중으로 방출하는 에너지보다 지중으로 흡수하는 에너지가 많았다. 흐리거나 비 온 날은 부직포평상과 부직포터널은 대기중으로 방출하는 에너지보다 지중으로 흡수되는 에너지가 더 컸으나, PE필름터널은 대기중으로 방출하는 에너지가 컸다. 3. 온도의 수직분포는 날씨에 관계없이 낮에는 역전 상태를 보였고, 일몰 이후부터 아침까지는 감률상태이었다. 4. 최고기온은 맑은 날 PE필름터널에서 외부기온보다 21.1$^{\circ}C$ 높은 47.2$^{\circ}C$이었고, 부직포터널은 10.9$^{\circ}C$ 높은 37.$0^{\circ}C$이었다. 흐린 날 외부기온보다 PE필름터널은 8.1$^{\circ}C$ 높고, 부직포터널에서는 4.$0^{\circ}C$높게 나타났다. 최저기온은 날씨에 관계없이 0~0.4$^{\circ}C$ 이내로 차이를 보이지 않았다. 일교차는 외부기온, 부직포 터널, 비닐터널 순서로 커지는 경향이었다. 5. 모의 소질은 부직포터널이 부직포평상 또는 PE필름터널보다 충실하였다.

• 한국군사과학기술학회지
• /
• 제11권2호
• /
• pp.144-151
• /
• 2008

An experimental study has been conducted to investigate the effects of circular damage hole on the characteristics of airfoil performance. The damage on a wing created from a hit by anti-air artillery was modeled as a circular hole. Force balance measurements and static pressure measurements on the wing surface were carried out for the cases of having damage holes of 10% chord size at quarter chord and/or half chord positions. All experiments were conducted at Reynolds number of $2.85\times10^5$ based on the chord length. The surface pressure data show big pressure alterations near the circular damage holes. This abnormal surface pressure distribution produces shear stress that could lead to the acceleration of the structural degradation of the wing around the circular damage hole. However, in spite of the existence of circular damage holes, the measured force data indicated the only a slight decrease in lift accompanied by increase in drag compared to the results of undamaged one. The influence of damage hole on the aerodynamic performance was increased as the location of damage moved to the leading edge. The effect on the control force was insignificant when the damaged size was not large.

• 한국항공우주학회지
• /
• 제34권10호
• /
• pp.61-70
• /
• 2006

마하 4 비행 조건에서 작동하는 고성능 램제트와 듀얼모드 스크램제트 엔진의 초음속 공기 흡입구 모델을 설계하였다. 배압, 받음각, 요각 등 비행 변수의 변화에 따른 내부 유동 특성을 파악하기 위하여 규슈대학교의 불어내기식 초음속 풍동을 이용한 실험을 수행하였다. 유동 가시화를 위하여 쉴리렌 기법, 오일 가시화 기법을 이용하였으며, 정량적 성능 분석을 위하여 표면 압력 및 전압력을 측정하였다. 실험의 결과는 전산 유체 해석과 비교하였다. 본 연구는 기본적이지만 찾기 힘든 고 마하수 초음속 공기 흡입구 유동의 실험 결과를 제시한다.

• 한국전산유체공학회지
• /
• 제17권2호
• /
• pp.100-106
• /
• 2012

Ice accretion on the surface of aircraft in flight can adversely affect the safety of aircraft. In particular, it can cause degradation of critical aircraft performances such as maximum lift coefficient and total pressure recovery factor in engine air intake. In this study, computational prediction of ice accretion around a rotorcraft air intake is conducted in order to identify the impingement region with high droplet collection efficiency. Then the amount of ice accretion on the air intake, which is essential in determining the required power of ice protection system, is calculated. Finally, the effect of icing wind tunnel size is investigated in order to check the compatibility with the real in-flight test environment.