• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.12
• /
• pp.624-630
• /
• 2001

The trend of the regulations on environmental issues are getting tight. Responding to this trend new technologies such as moving electrodes, wide pitch and pulsed power supply are also introduced in the electrostatic precipitator(EP) systems. The introduction of wide pitch and moving electrodes enhances the system performance of the EPs by improving air-flow and by improving the ash reentrainment on rapping. The power supplies for the EPs developed up to date include thyristor-based dc or intermittent type, SMPS(switching mode power supply) type and the pulsed-power supply type. The use of the pulsed ones is known to improve dust-collecting efficiency of high resistivity ash and reduces back corona occurrence in the collecting plate. There are two kinds of pulsed-power supplies; one with pulsed transformers and the other with direct dc switching devices. The latter uses rotary spark gap switches or semiconductor switches. Both have the merits and demerits: the spark gap switches are simple and robust but has short life time, hence, high maintenance cost, whereas the semiconductor switches have long life time but are costly. In this study, A high voltage power supply with superimposing voltage pulse on dc source was developed for EPs. This study describes circuit topology, operating principle of the scheme, and analysis of experimental results on Dong-Hae Power Plant. The pulsed power supply consists of a variable dc power supply with ratings of 60kV, 800mA and pulse generator which is made of high voltage thyristor-diode switch strings, an LC resonant tank and a blocking inductor. The pulse generator generates variable pulse-voltage up to 70kV using a high frequency resonant inverter with a variable dc source. Two prototypes were built and tested on 250MW DongHae power plant to verify the possibility of the commercial use and the normal operation in the transient states.

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.19-24
• /
• 2011

Due to the latest industrial flow comes mainly switch to high-tech industries, combustible metals as Al, Mg, Li, Zn more require to use for the aircraft, car, cell phones, electronics and others. As a result, Increasing the processing of combustible metals due to increase in amount of combustible metals giving rise dust explosions also. Most Explosions caused by combustible metal dust, occurred in air cleaning device of local exhaust ventilation to capture and store the combustible dust. Therefore, this study was conducted to present and analyze technically that deformation and rupture shape of air cleaning device structure by Finite Element Analysis(FEA) rather than a simple prediction, in case of explosion occurs in an air cleaning device.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.11
• /
• pp.458-465
• /
• 2016

The purpose of this research is to improve the thermal effiency of solar collector and to quantitatively analyze its performance. Solar thermal systems have been limited to water heating systems mainly using low-temperature range. However, through diverse developments, the application has been extended to medium- and high-temperature fields such as solar heating, solar air conditioning, and solar thermal industrial process. Among the diverse research, this research is specially focusing on enhancement of the thermal performance by minimizing the heat loss coefficient of flat plate solar collectors. In order to do it, a front-side glazing material and a back-side insulation material with high insulated structure is proposed and based on computational analysis, the performance of energy collecting volume of the proposed solar collector is analyzed. The research shows that the proposed structure has the excellent performance at medium- and high-temperature range. therefore, it is expected that the proposed structure can easily replace existing technologies.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2007.11a
• /
• pp.193-198
• /
• 2007

KIER has been developing the anode supported flat tubular SOFC stack for the intermediate temperature $(700{\sim}800^{\circ}C)$ operation. for this purpose, we have first fabricated anode supported flat tubular cells by the optimization between the current collecting method and the induction brazing process. After that we designed the compact fuel & air manifold by adopting the simulation technique to uniformly supply fuel & air gas and the unique seal & insulation method to make the more compact stack. For making stack, the prepared anode-supported flat tubular cells with effective electrode area of $90cm^2$ of connected in series with 12 modules, in which one module consists of two cells connected in parallel. The performance of stack in 3 % humidified $H_2$ and air at $800^{\circ}C$ shows maximum power of 507 W. Through these experiments, we obtained basic & advanced technology of the anode-supported flat tubular cell and established the proprietary concept of the anode-supported flat tubular SOFC stack in KIER.

• Phonetics and Speech Sciences
• /
• v.6 no.4
• /
• pp.195-203
• /
• 2014

The aim of this study was to investigate the effects of phonation types ([+/- aspirated], [+/- fortis]) on aerodynamic measures with Korean bilabial stops. Sixty-three healthy young adults (30 males, 33 females) participated to evaluate the VOEF (Voicing Efficiency) tasks with bilabial stop consonants /$p^h$/, /p/, /p'/ using Phonatory Aerodynamic System (PAS) Model 6600 (Kay PENTAX Corp, Lincoln Park, NJ). All VOEF measures were significantly influenced by phonation types except RANP(pitch range)(p <.01). For sound pressure, maximum SPL, mean SPL, and Mean SPL during Voicing have been shown to be significantly greatest in fortis stop /p'/ than aspirated /$p^h$/ and lenis stop /p/ (p<.001). On the other hand, mean pitch after lenis stop was significantly lower than after aspirated and fortis stops (p<.001). Peak expiratory airflow, Target airflow, and FVC (Expiratory volume) were significantly lowest in fortis stop /p'/ which might be associated with higher aerodynamic resistance while peak air pressure and mean peak air pressure during closure were significantly lower in lenis stop /p/. Additionally, AEFF (Aerodynamic efficiency) was significantly higher in fortis stop /p'/ than lenis stop /p/ as well as aspirated stop /$p^h$/ (p<.001). Thus, sound pressure, airflow parameters, and aerodynamic resistance made crucial roles in distinguishing fortis /p'/ from lenis stop /p/ and aspirated. Additionally, pitch and subglottal air pressure parameters were important aerodynamic characteristics in distinguishing lenis /p/ from fortis /p'/ and aspirated /$p^h$/. Therefore, accurate aspirated /p/ stop consonant should be elicited when collecting the airflow, intraoral pressure related data with patients with voice disorders in order to enhance the reliability and relevance or validity of aerodynamic measures using PAS.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.380-385
• /
• 2019

This paper is concerned with departure passengers' dwell time analysis using real system data. Previous researches emphasize the importance of dwell time analysis from perspective of airport terminal planning and non-aeronautical revenue. However, short-term airport operation using passengers' dwell time is considered impossible due to absence of passengers' behavior data. Recently, in accordance with the wave of smart airport, world leading airports are systematically collecting passenger data. So there is high possibility of analyzing passengers' dwell time with the data stacked in the airport database. We conducted dwell time analysis using data from Incheon Int'l airport. In order to handle passenger data, we adapted clustering algorithm which is one of data mining techniques. As a clustering result, passengers are divided into 3 clusters. One is the cluster for passengers whose dwell time is relatively short and who tend to spend longer time in the airside. Another is the cluster for passengers who have near 3 hours dwell time. The other is the cluster for passengers whose total dwell time is extremely long.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.3
• /
• pp.97-105
• /
• 2021

Most of the rural development projects for the welfare of residents are mainly new construction and remodeling projects for community buildings such as village halls and senior citizens. However, in the case of the construction industry, it has been studied that 23% of the total carbon dioxide emissions generated in Korea are generated in the building-related sector. (GGIC, 2015) In order to reduce the emission of environmental pollutants resulting from construction of rural community buildings, there is a need to establish a system for rural buildings by predicting the environmental impact. As a result of this study, the emissions of air pollutants from buildings in rural communities were analyzed by dividing into seven stages: material production, construction, operation, maintenance, demolition, recycling, and transportation activities related to disposal. As a result, 12 kg of carbon dioxide (CO), 0.06 kg of carbon monoxide (CO), 0.02 kg of methane (CH), 0.04 kg of nitrogen oxides (NO), 0.02 kg of sulfurous acid gas (SO), and non-methane volatile organics per 1m of buildings in rural communities It was analyzed that 0.02 kg of compound (NMVOC) and 0.00011 kg of nitrous oxide (NO) were released. This study proved that environmentally friendly design is possible with a quantitative methodology for the comparison of operating energy and air pollutant emissions through the design specification change based on the statement of the rural community building. It is considered that it can function as basic data for further research by collecting major structural changes and materials of rural community buildings.

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.249-258
• /
• 1996

To improve the efficiency of in vitro production of embryos with follicular oocytes in Korean Native cows, the recovery rates, in vitro maturation, fertilization and development, and the time required for collecting and processing oocytes by aspiration with or without slicing were evaluated comparatively. The ovaries were obtained from a local abattoir and placed in physiological saline at 25~28$^{\circ}C$ and brought to the laboratory within 3 hrs. The oocytes were collected by aspiration of follicles(2~6mm) with or without slicing ovaries after aspiration, and classified into Grade I, Grade II, Denuded, Expanded oocytes by the morphology of cumulus cells attached and the homogeneity of cytoplasmic granules. Also the time required for each step of collecting and processing oocytes were measured. The cumulus cells were removed in some Grade I oocytes to measure their size and nuclear configuration before and after in vitro maturation. The Grade I oocytes were matured in vitro(IVM) for 24 hrs. in TGM-199 supplemented with 35$\mu$g /ml FSH, 10$\mu$g /ml LH, 1 $\mu$g /ml at 39$^{\circ}C$ under 5% C02 in air. They were fertilized in vitro(IVF) by epididymal spermatozoa treated with heparin for 24hrs. and then the zygotes were cocultured in vitro (IVC) with bovine oviductal epithelial cells for 10 days. The results obtained were as follows: The number of oocytes recovered per ovary was averaged 6.6 by aspiration and 11.2 by slicing post aspiration, which summed to 17.8. The number of Grade I oocytes recovered per ovary was averaged 3.1 by aspiration and 3.6 by slicing, which summed to 6.7. The percentage of Grade I to total oocytes recovered was significantly(P<0.05) higher as 48.0 % in aspiration than 31.6% in slicing post aspiration. The time requlred for recovering a Grade I oocyte by aspiration and slicing was 1.1 and 2.5 min, respectively. The mean diameter of Grade I oocytes by aspiration and slicing was similar as 148.7 and 151.5$\mu$m, respectively. The percentage of Metaphase II stage oocytes after IVM for 24 hours was significantly (P

• Journal of Environmental Health Sciences
• /
• v.47 no.5
• /
• pp.410-424
• /
• 2021

Background: Subway stations have the characteristics of being located underground and are a representative public-use facility used by an unspecified number of people. As concerns about indoor air quality (IAQ) increase, various management measures are being implemented. However, there are few systematic studies and cases of long-term continuous measurement of underground station air quality. Objectives: The purpose of this study is to analyze changes and factors influencing IAQ in subway stations through real-time continuous long-term measurement using IoT-based IAQ sensing equipment, and to evaluate the IAQ improvement effect of a bio-filter system. Methods: The IAQ of a subway station in Seoul was measured using IoT-based sensing equipment. A bio-filter system was installed after collecting the background concentrations for about five months. Based on the data collected over about 21 months, changes in indoor air quality and influencing factors were analyzed and the reduction effect of the bio-filter system was evaluated. Results: As a result of the analysis, PM₁₀, PM_2.5, and CO₂ increased during rush hour according to the change in the number of passengers, and PM₁₀ and PM_2.5 concentrations were high when a PM warning/watch was issued. There was an effect of improving IAQ with the installation of the bio-filter system. The reduction rate of a new-bio-filter system with improved efficiency was higher than that of the existing bio-filter system. Factors affecting PM_2.5 in the subway station were the outdoor PM_2.5, platform PM_2.5, and the number of passengers. Conclusions: The IAQ in a subway station is affected by passengers, ventilation through the air supply and exhaust, and the spread of particulate matter generated by train operation. Based on these results, it is expected that IAQ can be efficiently improved if a bio-filter system with improved efficiency is developed in consideration of the factors affecting IAQ and proper placement.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.161-171
• /
• 2011

Most public organizations which charge for measuring or collecting environmental information provide web-based information services. In the case of Seoul, it is provided smart phone app for information services on region or district unit. However, there is no smart phone application for environment information services considering location-based services with the concept of personalization. The purpose of this study is to deign and implement a smart phone app for air environment and radioactive information services with these features. Hybrid type is adopted, so that several things are possible: access to a variety of devices by web languages, and N-Screen support is available. According as social needs with respect to more environmental information and their contents are increasing, this approach will be useful.