• Journal of Climate Change Research
• /
• v.9 no.4
• /
• pp.313-318
• /
• 2018

The growth rate of international aviation is expected to be higher than that of most industries and the proportion of carbon emissions from the aviation industry will become very significant as the year 2050 approaches. Constraining the growth of this industry is not desirable because it is essential for human welfare as well as the development of related industries. However, reduction of carbon due to aviation is not easy because it is difficult to improve fuel efficiency in a significant way. The ICAO (International Civil Aviation Organization), which is the main organization responsible for handling this problem, developed a program named CORSIA (Carbon Offsetting and Reduction Scheme for International Aviation). The present study analyzes various strategies for countries and airlines to comply with CORSIA using a fuel-efficient system. We conclude that countries should improve their airspace utilization systems, airport facilities, and air navigation systems. Additionally, based on the results of a flight data analysis, airlines should improve their operational efficiency in terms of operations control, flight operation, and maintenance management.

• Korean Journal of Artificial Intelligence
• /
• v.6 no.1
• /
• pp.1-10
• /
• 2018

Compressed Air is an important energy source used in most factories nowadays. The automation trend using air compressor has been gradually increasing with the interest of the 4th industry in recent years. With the air compressor system, it is possible to construct the device at low cost and easily achieve automation and energy saving. In addition, With trend of FA, miniaturation and light weight manufacturing trend expand their use in the electronics, medical, and food sectors. Research method is to design the technology for the remote control of the following information as USN base. Development of flexible sensing module from real time observation module for fusion of IT technology in compressed air systems, design and manufacture of flexible sensing module, and realiability assessment. Design of real-time integrated management system for observation data of compressed air system - Ability to process observation data measured in real time into pre-processing and analysis data. This study expects unconventionally decreasing effect of energy cost that takes up 60~70% of air compressor layout and operation and maintenance management cost through USN(Ubiquitous Sensor Network) technology by using optimum operational condition from real time observation module. In addition, by preventing maintenance cost from malfunction of air compressor beforehand, maintenance cost is anticipated to cut back.

• Journal of Korea Port Economic Association
• /
• v.26 no.4
• /
• pp.1-18
• /
• 2010

The purpose of this paper is to evaluate the green logistics of Korea enterprises. According to participate pan-nationally about environment problems, the field of logistics is required to transfer green logistics like increase efficiency of using energy and construct economic systems. And also environment-friendly policies of enterprises are playing important role. So authors selected and analysed factors through precedent study and questionnaire. Selected factors are cultivation about environment-friendly policy awareness to employees, Utilization environment-friendly resources, decrease of atmosphere pollution substance, company's promotion of outside environment-friendly policy. In order to shed light on these problem, fuzzy AHP method is adopted and the factor of cultivation about environment-friendly policy awareness to employees is the highest weight. And also result of the highest weight between enterprises that set policies about green logistics and factors' are The Korean Air, Glovis, Korea Express synthetically.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.471-480
• /
• 2015

Reliance on road transport in domestic logistics can lead to intensified congestion and greenhouse gas emissions due to the rise in oil prices, any increase in logistics costs can have a high social cost. The government policy on Low Carbon Green Growth is seeking to take advantage of the railway system. However, existing railway transport logistics systems, for reasons such as low speed, low track capacity constraints, and the impossibility of implementing a Door to Door system, make it difficult to activate a railway logistics program. As a result of this study, a national R&D project to develop a High-Speed Passenger/Baggage Mixed Train(Hy-SoBex) utilizing the rail capacity constraints to overcome the difficulties of linking an air cargo and freight railway logistics system, we propose a variety of service models and select the optimal service model.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2011

Controlling industrial vehicle operated by human in warehouse was not simple since the information transfer for controlling the vehicle was not easy. However, as the technology for the WMS (Warehouse Management System) has been advanced and the PDA (Personal Digital Assistant) has come into wide use in a workplace, the control of man-operated vehicle became less difficult as do to AGVS (Automated Guided Vehicle System). This study examines the ways to improve the efficiency of warehouse operation through introducing rule of task assignment for the vehicles, particularly forklift. This study, basically, refer to AGV operation policy because a great number of studies for AGV dispatching rule have been done and the mechanism for the controlling vehicles is very similar. The workers in field prefer to simple dispatching rules such as Shortest Retrieval Time First (SRTF), Shortest Travel Time First (STTF), and Longest Waiting Time First (LWTF). However, these rules have potential disadvantage. Thus, several rules made up by combining rules mentioned above are introduced and these new rules use threshold value or evaluation formula. The effectiveness of these new rules are tested by simulation and the results are compared. This study proposes favorable dispatching rules for forklift in warehouse for the efficiency of the vehicle operation and stability of service level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.493-500
• /
• 2015

The importance of the air and vessel traffic control center is increasing rapidly after the recent accident of 'Sewol ferry'. Aviation, marine, and the logistics sectors are already using monitoring and control technology widely. However, the monitoring and control system for complex and dangerous construction sites operation has yet to be employed. A monitoring/control system is required for effective communication between the control center and the construction equipment fleet at a construction site, and also the exact role that notifies accurate process and identification of hazards on construction sites as needed. Therefore, this paper presents the study about communication between the construction equipment fleet and the control center through the comparison of air traffic, marine, and logistics control systems for the development of construction equipment fleet management system.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.710-715
• /
• 2023

Urbanization brings many challenges such as traffic, housing, and environment. To solve these problems, researchers are working on new transportation systems like urban air mobility (UAM). UAM aircraft should fly safely without burdening the existing air traffic system in the early stage of low-density operation. The airspace should also be managed and operated efficiently. Therefore it is important to make urban air traffic predictable by using corridors and collecting data on low-density operations in the early stage. For this purpose various simulations are needed before operation to create scenarios that estimate potential collisions between UAM aircraft and to evaluate the risks of aircraft spacing, loss of separation (LoS), and near mid air collision (NMAC). This paper focuses on identifying the requirements and considerations for setting separation standards for urban air traffic based on the results of studies.

• Journal of Korea Port Economic Association
• /
• v.39 no.2
• /
• pp.77-95
• /
• 2023

The regional infrastructure industries of Gwangyang City, the subject of this study, are Gwangyang Port and Gwangyang Steel Mill. Therefore, it is necessary to analyze the regional economic ripple effects of the port logistics industry in Gwangyang City. In this study, a multi-stage approach using the RW and the LQ methodology using the national input-output tables in 2015 and 2019 is used to prepare the regional interindustry analysis chart in Gwangyang City, and an exogenous demand induction model that reclassified the port logistics industry was applied. Through this, the purpose of this study was to provide policy implications by figuring out the regional economic ripple effects of the port logistics industry quantitatively in Gwangyang City. As a result of the analysis, the industries with high production inducement effect and forward/backward linkage effect of the port logistics industry in Gwangyang City were analyzed as manufacturing, transportation, land and air logistics sectors. And the industries in which the added value inducement effect and the employment inducement effect were analyzed as an industry related to the service industry. Therefore, it is necessary to prepare support measures to foster the port logistics industry as a way to promote these industries and revitalize the local economy of Gwangyang City. To this end, it is desirable to improve policies and systems for the vitalization of the Gwangyang port maritime cluster and provide various policy support for the port logistics industry in Gwangyang City. This study is meaningful in suggesting policy implications for the regional economy of Gwangyang City based on the results of exogenous analysis of the port logistics industry in small and medium-sized cities. However, It seems that further studies related to this will be needed in the future.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.8
• /
• pp.419-428
• /
• 2017

In this study, energy loss due to ventilation load in the dock system was analyzed through simulation. Also, flow generated in the dock system of the warehouse was measured using manufactured measuring devices. Numerical simulation was conducted by simulating the most common picking tasks by examining the actual working environment. Incompressible and unsteady turbulent flows were assumed, and the turbulence model was the k-e standard model. Proper grid was selected through grid dependency test. Measurement was conducted using Honeywell and Vaisala sensors, and flow and temperature inside the warehouse were measured and compared with simulation results to validate simulation. When comparing amount of loss occurring in two hours and amount of loss occurring in 15 minutes, docking time of the former was eight times longer but energy loss was 3.8 times lower. Ventilation load occurring during the initial period after opening docking system accounted for a large proportion of total ventilation load. Also, comparing the load when the dock was closed and the load when the truck was parked, ventilation load was significantly higher than load due to heat conduction from the wall. Therefore, in improving the docking system, it is effective to reduce the gap by improving compatibility of the docking system and truck, rather than wall material.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.173-181
• /
• 2023

Aircraft carriers need to maintain an orderly flow of aircraft in order for military ships to conduct combat through aircraft. Maintaining aircraft flow is an important factor in strengthening ship and aviation safety. In order to maintain aircraft flow, it is essential to develop a state-of-the-art air control system that provides higher quality control information by simultaneously accommodating radar-based monitoring information and monitoring information based on CNS integrated technology. Based on this point, this study describes the function and operation method of specific control equipment for the operation of the Aviation Support System and Air Traffic Control System required to operate light aircraft carriers in Korea based on overseas cases.