• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.5
• /
• pp.17-28
• /
• 2018

Cyclonic-dissolved air flotation(Cyclonic-DAF), an advanced form of pressure flotation, applies a structure that enables the forming of twirling flows. This in turn allows for suspended matter to adhere to microbubbles and float to the surface of a treatment tank during the process of intake water flowing through a float separation tank. This study conducted a lab-scale test and pursued geometrical modeling using computational fluid dynamics(CFD) to establish a pilot scale design. Based on the design parameters found through the above process, a pilot cyclonic-DAF system($10m^3/hr$) for removing algae was created. Upon developing the pilot-scale cyclonic-DAF system, a type of algae coagulant(R-119) was applied as the coagulant to the system for field testing through which the removal rates of chlorophyll-a and cyanobacteria were evaluated. The chlorophyll-a and harmful cyanobacteria of the raw water at region B, the field-test site, were found to be $177.9mg/m^3$ and 652,500cells/mL respectively. Treated waters applied with 60mg/L and 100mg/L of algae coagulant presented removal efficiencies of approximately 95% and 97%, respectively. The cyanobacteria cell number of the treated waters applied with 60mg/L and 100mg/L of algae coagulant both that were equal to or less than 1,000cells/mL and were below attention level criteria for the issuance of algae boundary.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.474-474
• /
• 2022

미세플라스틱이 물 환경으로 배출되는 주요 경로로는 하수처리장 방류수와 강우유출수가 있다. 하수처리장 및 유역에서 배출된 미세플라스틱은 하천과 하구역을 거쳐 해양과 같은 대규모 수역으로 이동하는데, 이 과정에서 해양뿐만 아니라 담수호, 저수지 등과 같은 공공수역에도 미세플라스틱이 지속적으로 축적되고 있다. 특히 강우유출수에 포함된 미세플라스틱은 적절한 처리 과정 없이 하천으로 유입되는 경우가 많아 공공수역 내 미세플라스틱 저감 기술의 필요성이 증가하고 있다. 그러나 미세플라스틱 관련 기존 연구는 미세플라스틱의 분포 등 현황에 대한 모니터링 및 환경위해성과 관련한 것이 대부분이며, 미세플라스틱 저감기술 관련 연구 또한 일부 정수처리 및 하수처리 공정을 대상으로 하는 초기 단계의 연구가 진행되고 있을 뿐 공공수역에서의 미세플라스틱 저감기술 개발 관련 연구는 전무한 실정이다. 따라서, 본 연구에서는 기존의 물리·화학적 수처리 공정인 용존공기부상법(Dissolved Air Flotation, DAF)에 물의 전기분해 시발생하는 브라운가스를 활용하여 응집된 물질을 빠르게 부상시켜 수체 내 오염물질을 제거할 수 있는 기술을 통해 수체 내 미세플라스틱 저감효과를 분석하였다. 또한, 해당 기술을 공공수역인 저수지에 적용하여 오염물질과 함께 미세플라스틱을 제거할 수 있는지 검토하였다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.119-123
• /
• 2011

The application of flexo printed ONP and OCC leads to brightness decrease of deinked stock in ONP recycling system. The largest problems are due to accumulation of flexo ink & introduction of brown fibers. All these are emphasized by variations in the amount of flexo printed ONP and OCC in recovered ONP stock. Most of the brightness problems caused by flexo ink can be helped and solved by applying a proper polyelectrolytes as coagulation agent and flocculation agent. This requires exact evaluation of sedimentation or dissolved air flotation potentials of flexo ink and polyelectrolytes. Effect of bleaching chemical (H2O2) addition level on the increase of brightness of OCC included stock has been investigated by lab scale test.

• Journal of Korean Society of Water and Wastewater
• /
• v.17 no.4
• /
• pp.528-533
• /
• 2003

Bubble size is one of the most important parameters affecting DAF (Dissolved-Air-Flotation) process. It is generally known that small bubbles are preferred. However, the fact seems to be based on the particle removal efficiency at contact zone only, without considering separation zone. Besides, the effect of bubble size on the overall DAF process has not been fully investigated yet. Therefore, the effect of bubble size on collision efficiency, collision chances, and surface loading rate is calculated using theoretical models, and the results are discussed in this paper.

• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.4
• /
• pp.118-125
• /
• 1997

Conventional sedimentation method has some limitations for turbidity removal in water treatment because drinking water sources are getting polluted. Removal rates of turbidity using DAF and sedimentation process were compared for various water conditions to know whether DAF is effective to improve sedimentation process. Water samples were clay(gravity 2.65) water 100mg/l, H raw water, mixed water of H raw water and clay 100mg/l, and mixed water of HA(Humic Acid) 5mg/l and clay 100mg/l. Other parameters were temperature, coagulants(Alum, $FeCl_3$), and treatment time. Water temperature greatly affected in removal rates of turbidity for sedimentation and DAF. Generally DAF was more effective in removal rates of turbidity than sedimentation at the same experimental condition. Removal rates of $UV_{254}$ were high to over 90%, and independent of temperature and coagulant.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.34-41
• /
• 2003

The effect of wettability of deinking agents which formed with various nonionic surfactants against the pulp fibers and ink particles were studied, And the effect of flotation processes on the deinking were also investigated. The wettabilities of the deinking agents against the water and ink particles were measured by Washburn tube and sessile drop techniques, respectively. As the water absorption increased (i.e., hydrophilicity increased), the ink removal increased, which indicates that the ink removal is strongly affected by the detachment process due to the swelling of the pulp. Also, when the contact angle of air/ink/deinking agent increased, the hydrophobicity of the ink particles increased, the efficiency of the ink removal and the brightness increased.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.3
• /
• pp.295-300
• /
• 2005

The performances of electroflotation (EF) on the thickening of activated sludge were investigated using laboratory scale batch flotation reactors. Four activated sludges including bulking sludges were tested. After 30minutes of EF operation, 57-84 % of sludge volume reduction could be achieved by EF, while only about 1.5-14% could be obtained by gravity thickening for the same period. After thickening the effluent water quality in terms of TCOD, SS, and turbidity was improved by EF operation for all sludge samples. It is induced that the air bubbles entrapped in the thickened sludge play a key role in the observed improvement of sludge thickening and effluent quality.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.4
• /
• pp.53-58
• /
• 1998

Dissolved Air flotation (DAF) has become increasingly important in the field of drinking water treatment, however, the research to investigate the mechanism of collision between bubble and particle has been limited. The electrostatic repulsion forces between them are critical to collide with each other. Zetapotential of bubble and particle show their electrostatic condition. In this research, a setup to measure the zetapotential of rising microbubble is made using electrophoresis method and measured ZP of bubble in our Lab. The results show the effect of pH on zetapotential of bubble. The findings from this research are compared with other results. It will he helpful to understand and explain the mechanism of collisions between bubble and particle on different conditions of bubble charge in DAF process.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.35-44
• /
• 2010

As the competition of acquiring foreign resources of advanced countries and developing countries intensifies, South Korea which imports most of the mineral resources, started to re-develop domestic mines for molybdenite ore, in order to secure stable natural resources and decrease foreign currency expense. In this study, as a result of performing XRD and composite analysis on Dongwon NMC's (the sole producer of molybdenite ore in Korea) final concentrate(Mo 50.4%), Quartz, Grossular and Hedenbergite exists as impurities and size analysis showed that in relative coarse particle range of 60~140 mesh was formed with high grade over 57% Mo. Also, a test was performed to confirm the possibilities of increasing the grade and recovery of Dong won NMC's final ore. As a result, Mo 58.6% ($MoS_2$ 97.83%) was obtained with 87.47% recovery at a condition of 15 minutes grinding time, Kerosene as collector 0.1 l/ton, AF as Frother 65 7.2 l/ton, wash water of 630 ml/min and air flow rate of 1,197 ml/min.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.6
• /
• pp.393-402
• /
• 2020

In the membrane process, it is important to improve water treatment efficiency to ensure water quality and minimize membrane fouling. In this study, a pilot study of membrane process using reservoir water was conducted for a long time to secure high flux operation technology capable of responding to influent turbidity changes. The raw water and DAF(Dissolved Air Flotation) treated water were used for influent water of membrane to analyze the effect of water quality on the TMP (Trans Membrane Pressure) and to optimize the membrane operation. When the membrane flux were operated at 70 LMH and 80 LMH under stable water quality conditions with an inlet turbidity of 10 NTU or less, the TMP increase rates were 0.28 and 0.24 kPa/d, respectively, with minor difference. When the membrane with high flux of 80 LMH was operated for a long time under inlet turbidity of 10 NTU or more, the TMP increase rate showed the maximum of 43.5 kPa/d. However, when the CEB(Chemically Enhanced Backwash) cycle was changed from 7 to 1 day, it was confirmed that the TMP increase rate was stable to 0.23 kPa/d. As a result of applying pre-treatment process(DAF) on unstability water quality conditions, it was confirmed that the TMP rise rates differed by 0.17 and 0.64 kPa/d according to the optimization of the coagulant injection. When combined with coagulation pretreatment, it was thought that the balance with the membrane process was more important than the emphasis on efficiency of the pretreatment process. It was considered that stable TMP can be maintained by optimizing the cleaning conditions when the stable or unstable water quality even in the high flux operation on membrane process.