• Korean Journal of Organic Agriculture
• /
• v.9 no.4
• /
• pp.27-54
• /
• 2001

This paper aims to provide a basic framework to make a regional plan for the environment-friendly agriculture. To prepare the regional plan is mandated by the Environment-friendly Agriculture Promotion Act of 1998. Here is proposed the input/output analysis framework, which includes the shifts of fertilizers, herbicides, pesticides, and livestock manures Basically, the discharged amount of polluted elements means the difference between the amount of the elements entered into the crop and livestock sectors and the amount of the elements absorbed or used by the crop and/or livestock. A few suggestions are offered for better regional environment-friendly agricultural plan. The foremost important thing is to establish a data collection system. The \"Green Accounting System\" is suggested. It is also crucial to create a standard guideline or manual which Provides detailed procedures to follow in making the plan by the local planners. More fundamentally, many experts on the regional planning will be demanded in the near future. Some compound model which links, for instance, the forestry, the livestock sector, and the crop sector, needs to be devised. Finally, it is argued here that more elaborated model will work as an integrated environmental improvement plan which embraces living environment as well as agricultural environment.vironment.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.547-556
• /
• 2002

Upright positioning of garlic cloves in mechanical planting has been considered as an essential process because pose of garlic affects not only initial budding and rooting of garlics but quality and yield. Due to the geometrical uniqueness and irregularity of garlic cloves in shape, manual planting operation has been conducted. The overall objective of this research was to determine design factors for designing a garlic clove planter The results are summarized as follows : 1. A vibrating-type clove-metering device was designed and tested. Effects of tilted angle of metering plate and magnitude of vibration on metering performance were investigated. The successful planting rates of the metering device were 96.7% for Hanji varieties. 2. Clove upright-positioning device, posture inducer was designed and tested. When the clearance between the hoppers was set at 4mm, the rates of upright positioning of the device were 92.2% for with Hanji varieties. 3. Optimum metering performance was observed at the plate tilted angle of 80。 with the posture type positioning device.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.35 no.2
• /
• pp.106-110
• /
• 2017

The developmental responses of insects to temperature are important considerations in gaining a better understanding of their ecology and life histories. Temperature dependent models permit examination of the effect of temperature on the geographical distributions, population dynamics, and management of insects. The measurements of insect developmental and survival responses to temperature pose practical challenges that depend. The developmental characteristics of A. diaperinus were investigated at four temperature regimes (20, 25, 30 and $35^{\circ}C$), a relative humidity of 60%, and a light:dark photoperiod of 16:8h. The developmental time from larva to adult was 129.0, 49.8, 40.5 and 31.9 days at temperatures of 20, 25, 30 and $35^{\circ}C$, respectively. Pupal rate was 80.0%, 100%, 83.3% and 91.7% at temperatures of 20, 25, 30 and 35 respectively. There is an increasing need for a standardized manual for rearing this. Pupa had significantly lower weights at $35^{\circ}C$ than at the other temperatures. Female pupae (20mg) were significantly heavier than male (17mg).

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.371-378
• /
• 2008

Bio-diesel applications seem to be extended due to bio-diesel policies and changes of agricultural environment. This study was conducted to develop a rapeseed reaping equipment attachable to the conventional combine. This paper was intended to report concept design, process and manufacturing of the prototype rapeseed reaping equipment. For concept design, physical properties of "SUNMANG", which is a typical rapeseed as bio-diesel materials, were considered. The designed prototype rapeseed reaping equipment consisted of wide-width plates, finger type knifes, side cutter knifes and drive equipments. The wide-width plate is 2.1 m wide, 0.7 m long, and 0.002 m thick. The finger type cutter knifes have 14.5 fingers, 30 knifes, and the specification was 7.6 cm of pitch, 8.3 cm of length and $21^{\circ}$ of cutting angle. The side cutter knifes consisted of a hydraulic pump, a hydraulic motor, a flow control and a relief valve, a hydraulic hose, a driving equipment and a reciprocating cutter knife. The 18 reciprocating cutter knifes were 137 cm long and knife pitch, knife length and cutting angle were 7.7 cm, 10.5 cm, and $18^{\circ}$. Prototype weight of the rapeseed reaping equipment was heavier by 272 kg when compared with the manual reaping equipments. Load distributions of left and right side showed 50% and 49%, and those of front and rear side showed 64% and 36%. Static turn-over angles in left and right of the prototype were $38.1^{\circ}$ and $38.7^{\circ}$, respectively. The designed prototype rapeseed reaping equipment was properly mounted at the front of a conventional combine.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.597-606
• /
• 2021

Due to the characteristics of the farmland in Korea, forward and reverse shift is the most used. The fatigue of farmers is caused by forward and reverse shifting with a manual transmission. Therefore, it is necessary to improve the convenience of forward and backward shifting. This study was a basic study on the development of a current control system for forward and reverse shifting of agricultural tractors using proportional control valves and a controller. A test bench was fabricated to evaluate the current control accuracy of the control system, and the stability of the controller was evaluated through CPU (central processing unit) load measurements. A controller was selected to evaluate the stability of the proportional valve controller. The stability evaluation was performed by comparing and analyzing the command current of the controller and the actual current measured. The command current was measured using a CAN (controller area network) communication device and DAQ (data acquisition). The actual current was measured with a current probe and an oscilloscope. The control system and stability evaluation was performed by measuring the CPU load on the controller during control operations. The average load factor was 12.27%, and when 5 tasks were applied, it was shown to be 70.65%. This figure was lower than the CPU limit of 74.34%, when 5 tasks were applied and was judged to be a stable system.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.3
• /
• pp.279-291
• /
• 2015

Objective: The purpose of the study is to evaluate appropriate weight for aged farmers in manually handling livestock feed in bags using ergonomic methods. Background: In the livestock industry in South Korea, despite the trend of aging of labor manpower, heavy items are still manually handled in many farms. In particular, among stockbreeding works, the handling of feed in bags weighing 25~30kg is reported as a cause of frequent injuries and musculoskeletal system diseases. However, studies on the standard for recommended weight allowed considering the physical characteristics of aged farmers older than 60 years with greatly decreased physical strength and muscle strength are insufficient. Method: To evaluate appropriate weight for handling of heavy livestock feed in bags, physical techniques for measuring recognized levels of physical work loads, the NLE (NIOSH lifting equation) a method that is an observation type technique, and an ergonomic modeling technique to predict compressive force imposed on L5/S1 were used. Subjects who participated in the experiment were organized into two groups of males/females with mean age exceeding 60 years, and lifting tasks were evaluated for nine weight levels. Results: Based on the results of psychophysical measurement, females showed a tendency of more drastic increases compared to males when weight was over 19kg. The results of estimation of regression models for the weight, 18.0 kg ($r^2=0.97$) and 15.3kg ($r^2=0.97$) were evaluated as stable load for males and females, respectively. In addition, both the observation type evaluation and ergonomic model evaluation showed stable loads in a range of 15~18kg. Conclusion: Given the results of the study, the weight of the feed in bags currently distributed to farms can become a cause of not only overexertion but also farm work related disasters such as musculoskeletal disorders and safety accidents. Providing livestock feed in bags weighing not more than 19kg for aged farmers is judged desirable, and managerial improvement for this matter is considered necessary. Application: The results of the present study can be utilized as useful data for institutional improvement of the weight of livestock feed in bags.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.57-60
• /
• 2002

Developed power off automatic stanch that keep floodgate upper stream water level changelessly for curtailment of operation by manpower and electricity lead-in equal early investment expense that manual system floodgate and electric motion floodgate have. Human strength does not need in floodgate operation as that power off automatic floodgate open and close floodgate automatically by buoyancy and also, another thing power does not need. Before establish floodgate, effect that get to waterway when behaves repair calculation of correct waterway and decide size of floodgate accordingly and establish floodgate must do examination analysis fussily. power off automatic floodgate night soil that get between countermeasure is the urgentest low-down in reply because can do mistake in operation by phenomenon and so on about water resources by different plate shape change through a model experiment examine closely need to.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.727-733
• /
• 1993

An attempt was made to mechanize the infield transportation system in a cocoa plantation. A small trailer was designed and fabricated and used with a commercial 2-wheeled walking tractor modified into a 4-wheeled tractor-trailer unit to suit the plantation conditions. The transporter had a capacity of 800 kg and could be loaded with about 1000 cocoa pods at a time and was well within the towing capability of a 10 hp tractor. Time and motion studies were conducted on a 30 acre, 6 year old cocoa plantation intercropped with coconut to compare manual and the tractor-trailer combination in relation to infield transportation. The total time taken to harvest 80 trees manually was computed to be 24 manuhours per hectare whilst the tractor-trailer combination required 18manhours.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1013-1025
• /
• 1993

Agriculture in Swaziland is the most important sector of the economy from the stand point of export earning, rural employment and dependency for family food. But, inspite of 65.5 percent of the household being busy in food production for family consumption in Swaziland, the import bill of food and live animals is rising from E119.7268 million in 1987/90 (An.St.Bul.1988) . A typical farm size, based on holding's growing crops, is only 1.93 ha which may prohibit owning a four wheel tractor for farm operations. The traditional hand tools are just not efficient and comfortable to operate in order to exploit full potential of the land. There are over 120.000 draught animals which have potential to be utilized in farming. The two wheel-tractor is another energy source which can be used for many farm-operations.

• Journal of Agricultural Extension & Community Development
• /
• v.17 no.4
• /
• pp.919-931
• /
• 2010

Forage barley was developed for decreasing the import of forages, and increasing the farmer' income about ten years ago. Nevertheless of higher of farmer' income, the forage barley' area is slowly increased because of lacking of barely seeds. In order to suggest the plan of the urgent spreading on forage barley, the seed-gathering of forage barley was cultivated on 14-provinces and 291ha on 2009. The cultivation area of kyeungnam, kyeungbuk and chunnam province was more than other provence. The youngyang cultivar was cultivated more than orher cultivar. Seed-gathering amount of Youngyang, Uhoo and Yooyun cultiva was 364,213 and 303MT respectively. There were several problems for seed-gathering of forage barley which were the delay of seeding time and the more seeding amount, and the higher seed drying temperature than that of standard manual.