• Title/Summary/Keyword: Agricultural Facilities

Search Result 973, Processing Time 0.02 seconds

Comparison of Analysis Methods for Ammonia from Swine Production Facilities

  • Kim, Ki Y.;Choi, Hong L.;Kim, Chi N.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.17 no.11
    • /
    • pp.1608-1614
    • /
    • 2004
  • This study was performed to evaluate the accuracy, validation and applicability of UV spectrophotometer (UV), Ion Chromatography (IC), and Detector tube (DT) methods for measuring ammonia (NH3) concentration in a swine confinement house and swine slurry storage tank. The mean values of $NH_{3}$ emitted from the house and slurry were 5.333 ppm and 42.192 ppm for the IC method; 4.13 ppm and 36.29 ppm for the Detector tube; and 5.417 ppm and 34.193 ppm for the UV method. The accuracy and the correlation of an ammonia level analyzed by the IC method compared to the UV method were 98% and 0.998($R^{2}$) in the swine confinement house and 94% and 0.997($R^{2}$) in the swine slurry storage tank. On the other hand, those of ammonia level measured by the Detector tube compared to the UV method were 77% and 0.957($R^{2}$) in the swine confinement house and 82% and 0.941($R^{2}$) in the swine slurry storage tank. This indicated that the accuracy and the correlation of the IC method compared to the UV method were higher than those of the Detector tube method compared to the UV method. Therefore, it was concluded that the IC method was more accurate in measuring ammonia concentration in a swine house and a swine slurry storage tank. The Detector tube method should not be applied to the swine slurry storage tank in which ammonia concentration is generally higher than 30 ppm because low accuracy is caused by a gross space between scales inscribed in the Detector tube.

Prediction of Heavy Metal Content in Compost Using Near-infrared Reflectance Spectroscopy

  • Ko, H.J.;Choi, H.L.;Park, H.S.;Lee, H.W.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.17 no.12
    • /
    • pp.1736-1740
    • /
    • 2004
  • Since the application of relatively high levels of heavy metals in the compost poses a potential hazard to plants and animals, the content of heavy metals in the compost with animal manure is important to know if it is as a fertilizer. Measurement of heavy metals content in the compost by chemical methods usually requires numerous reagents, skilled labor and expensive analytical equipment. The objective of this study, therefore, was to explore the application of near-infrared reflectance spectroscopy (NIRS), a nondestructive, cost-effective and rapid method, for the prediction of heavy metals contents in compost. One hundred and seventy two diverse compost samples were collected from forty-seven compost facilities located along the Han river in Korea, and were analyzed for Cr, As, Cd, Cu, Zn and Pb levels using inductively coupled plasma spectrometry. The samples were scanned using a Foss NIRSystem Model 6500 scanning monochromator from 400 to 2,500 nm at 2 nm intervals. The modified partial least squares (MPLS), the partial least squares (PLS) and the principal component regression (PCR) analysis were applied to develop the most reliable calibration model, between the NIR spectral data and the sample sets for calibration. The best fit calibration model for measurement of heavy metals content in compost, MPLS, was used to validate calibration equations with a similar sample set (n=30). Coefficient of simple correlation (r) and standard error of prediction (SEP) were Cr (0.82, 3.13 ppm), As (0.71, 3.74 ppm), Cd (0.76, 0.26 ppm), Cu (0.88, 26.47 ppm), Zn (0.84, 52.84 ppm) and Pb (0.60, 2.85 ppm), respectively. This study showed that NIRS is a feasible analytical method for prediction of heavy metals contents in compost.

Development of a CFD Model to Study Ventilation Efficiency of Mechanically Ventilated Pig House (강제환기식 돈사의 환기 효율성 분석을 위한 CFD 모델 개발)

  • Seo, Il-Hwan;Lee, In-Bok;Hong, Se-Woon;Hwang, Hyun-Seob;Bitog, Jessie Pascul;Yoo, Jae-In;Kwon, Kyung-Suk;Ha, Tae-Hwan;Kim, Hyeon-Tae
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.50 no.1
    • /
    • pp.25-37
    • /
    • 2008
  • When livestock facilities in Korea have been changed larger and denser, rearing conditions have been getting worse and the productivity of animal production have been decreased. Especially in the cold season, the minimized ventilation has generally been operated to save energy cost in Korea resulting in very poor environmental condition and high mortality. While the stability, suitability, and uniformity of the rearing condition are the most important for high productivity, the ventilation configuration is the most important to improve the rearing condition seasonally. But, it is so difficult to analyze the internal air flow and the environmental factors by conducting only field experiment because the weather condition is very unpredictable and unstable as well as the structural specification can not be easily changed by the researchers considering cost and labor. Accordingly, an aerodynamic computer simulation was adopted to this study to overcome the weakness of conducting field experiment and study the aerodynamic itself. It has been supposed that the airflow is the main mechanism of heat, mass, and momentum transfers. To make the simulation model accurately and actually, simplified pig models were also developed. The accuracy of the CFD simulation model was enhanced by 4.4 % of errors compared with the data collected from field experiments. In this paper, using the verified CFD model, the CFD computed internal rearing condition of the mechanically ventilated pig house were analyzed quantitatively as well as qualitatively. Later, this developed model will be computed time-dependently to effectively analyze the seasonal ventilation efficiency more practically and extensively with tracer gas decay theory.

A study on section design proposals of rural stream based on the adjacent land use and residents' preference (주변 토지이용과 주민 이용 선호도를 고려한 농촌마을 소하천 표준 횡단면 설계)

  • Im, Seung-Bin;Lee, Chun-Seok
    • Journal of Korean Society of Rural Planning
    • /
    • v.6 no.1 s.11
    • /
    • pp.29-37
    • /
    • 2000
  • The purpose of this study was to propose section designs for the ecological improvement of streams in rural villages in Korea. According to the survey about ecological conditions of rural streams of 10 selected rural villages (sep., 1996), the streams could be classified into three divisions(upstream, inner village, downstream), and the average width of streams was 9m, and the height of banks 3.1m. The slopes of basin were 7.33%, 2.67%, 1.39% at upstream, inner village, downstream respectively. The survey about the residents' usage of stream and the preferred activities(jun., 1997) showed that the streams were most frequently used for the supply of agricultural water use(39%), for the washing(15%) and for the recreation and rippling(10%), etc.. Three standard designs were presented for upstream, inner village, and downstream, and three standard sections were made by each designs. For the upstream division, it was designed to be used for the recreational activities in summer and the major stream bank materials were base rock and existing boulders with least artificiality. As the streams in the residential area were expected to be frequent access and used by the residents, most facilities for the streamside activity such as waterfront, water holes, shallows, walk were concentrated in this part with some artificiality. The downstream was designed for the agricultural activities such as water supply, space for the preparation of work and some break during the work.

  • PDF

Economical and Environmental Feasibility of Cultivation under Structure Due to the Introduction of Bio-energy -Comparative Analysis of Wood Pellets and Diesel- (목재펠릿 도입에 따른 시설재배의 경제적.환경적 타당성 분석 -목재펠릿과 경유의 비교분석을 중심으로-)

  • Yang, Jeong-Soo;Yoon, Sung-Yee
    • Korean Journal of Organic Agriculture
    • /
    • v.21 no.3
    • /
    • pp.335-350
    • /
    • 2013
  • With the efforts to development of renewable energy technologies, and increasing awareness to environmental issues, the usage of wood pallets has been increasing every year since the introduction of wood pallet technology to the domestic market. until 2009, majority usage of pellet boiler was in the residential houses. In an effort to increase the distribution of wood pellet boiler to cultivation facilities with high usage of fuels, The Ministry of Agriculture and Forestry has launched a distribution project of wood pellet boiler for fuel usage as a part of the agricultural and fishery energy efficiency projects. Although only small number of farms with a heat-culturing facility have replaced from conventional boiler to pellet boiler. Although part of reason for low usage of pallet boiler is lack of understanding and information of it, the main reasons are high initial cost and uncertainty of its cost efficiency. Also, most people from agricultural industry don't realize it's significance in terms of environmental benefit due to lack of understanding in 'resource circulation' and 'adopting to climate change'. In this study, first, we did a cost-efficiency analysis of the farm which uses a diesel boiler to grow cucumber, tomato, paprika. Then we replaced the diesel boiler to a pallet boiler and measured its cost-efficiency again. By comparing the cost-efficiency of the diesel boiler with the pellet boiler, we analyzed the economic viability of pellet boiler. Then we analyzed viability of pallet boiler usage in terms of 'resource circulation' and 'adopting to climate change'. As a result of our analysis, we have found out that under the current system of government support, the energy usage varies depends of the types crops grown and the higher the energy use, the more cost efficient it is to use the pallet boiler. Also, it is economically viable to use the pallet boiler in terms of 'resource circulation' and 'adopting to climate change'.

Analysis on the Settlement Conditions in the Troubled Reclaimed Areas Under State Control (III) - Living Conditions in Rural communities - (未完工干拓地의 定住生活 實態分析 (III) - 部落의 生活環境 -)

  • Choi, Soo-Myung;Hwang, Han-Cheol
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.33 no.3
    • /
    • pp.73-80
    • /
    • 1991
  • In Korea, small-scale reclaimed areas have been suffering from many problems because of the lack of comprehensive developing strategy although considerable investments have been inputed by the public sector since 1970's. For 3 reclaimed sites in Chonnam Province chosen as case study areas, the analysis, the third attempt of widely-spanned studies on areal conditions, concentrated on their living conditions. Its results were as follows : 1. Although rural residents have increased their concern on health and medical services, the public sector can only serve basic and emergent level of them, and therefore, the private sector, which is mostly placed in urban areas and costed much higher than public one, has the dominant share of those services. So, because those costs are a great expense to rural residents, their supplying system should be planned with special reference to lightening the economic burden of them. 2. By the development of locally fitted programs and innovative systems, the rural education should be qualitatively improved to deal successfully with its small scale. That will result in increasing the schooling rate to schools in rural communities, lightening the economic burden of rural residents on education services and finally activating them to contribute the betterment of rural education. 3. Servicing level of water supply, sewerage and garbage disposal in the reclaimed areas has been remaining at the lower order even in other rural areas. In the design of rural water supply, average daily consumption per capita should be changed according to the composition rate of fishing households and variety of the source of water supply. 4. Most of rural residents in the reclaimed areas want to establish the welfare facilites for the infant, youth, aged and public bath However in the long-term basis, the cooperative production and processing facilities should be considered for modernized efficient farming.

  • PDF

A Study on 3 Dimensional Modeling of Keum-man Connection Canal using GIS and considering Hydraulic Analysis (GIS와 수리학적 해석을 고려한 금만연결수로의 3차원 모델링에 관한 연구)

  • Kim, Dae-Sik;Nam, Sang-Woon;Kim, Tai-Cheol
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.50 no.5
    • /
    • pp.3-15
    • /
    • 2008
  • This study aims to simulate the 3 dimensional (3D) model of Keum-man connection canal using geographic information system (GIS) as well as considering design in viewpoint of engineering. The canal connects from Keumkang to Mangyungkang in order to supply fresh water into Saemankeum lake. This study used 3 dimensional spatial planning model (3DSPLAM) process to generate the 3D model, which has not only several planning layers in actual process, but also their corresponding layers in modeling process to simulate 3D space of rural villages. The discharge of the canal is $20m^3/s$ on slope of 1/28,400 in the canal length of 14.2km, which consists of pipe line and open channel. This study surveyed the route of the canal and its surrounding environment for facilities to make images in the 3D graphic model. Besides, the present study developed data set in GIS for geogrphical surface modeling as well as parameters in hydraulic analysis for water surface profile on the canal using HEC-RAS model. From the data set constructed, this study performed analysis of water surface profile with HEC-RAS, generation of digital elevation model (DEM) and 3D objects, design of the canal section and route on DEM in AutoCAD, and 3D canal model and its surrounding 3D space in 3DMAX with virtual reality. The study result showed that the process making 3D canal model tried in this study is very useful to generate computer graphic model with the designed canal on the surface of DEM. The generated 3D canal can be used to assist decision support for the canal policy.

Analysis of Dust Concentration in Dairy Farm according to Sampling Location and Working Activities (유우사 내부 위치 및 작업 형태에 따른 분진 모니터링 및 분석)

  • Park, Gwanyong;Kwon, Kyeong-Seok;Lee, In-bok;Ha, Taehwan;Kim, Rack-Woo;Lee, Minhyung
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.59 no.3
    • /
    • pp.71-81
    • /
    • 2017
  • Organic dust generated inside livestock facilities includes toxic organic matters such as bacteria and endotoxin. Dust can cause respiratory disease for worker and livestock, and consequently, degradation of welfare and productivity. Influence of dust on livestock workers has been studied since the 1970s. However, exposure limit for cattle farmer has not been established, unlike exposure limit for pig and poultry farmer. Furthermore, study on air quality inside livestock facility, especially inside dairy farm has been rarely conducted in Korea. In this study, dust concentration of TSP, PM10, inhalable and respirable dust has been monitored in the commercial dairy house according to location and working activities. Bedding material inside the stall was one of the major sources of dust. The amount of dust was related to water content level of the bedding material. Dust concentration was relatively high in leeward location, and the highest concentration was measured during TMR mixing process. The maximum value of inhalable dust concentration was 29.1 times higher than the reference value as fine particles drop to the TMR mixer. Dust generated by TMR mixing was presumed to decrease by adjusting moisture and drop height of feed.

Problems and improvement scheme for mushroom-industry (버섯산업의 과제와 발전방향)

  • Lee, Young-Seok;Seo, Geon-Sik
    • Journal of Mushroom
    • /
    • v.3 no.4
    • /
    • pp.159-171
    • /
    • 2005
  • The supply and demand of mushrooms has increased dramatically as the standard of living has increased and the nutritional and medical value of the mushrooms has been discovered. However, in meeting the demand, the profitability of the mushroom is being reduced. Even though there are many different types of and uses for mushrooms, the overall output production for the last ten years has consistently increased 5.9% per year, and for the last five years('00~'04) 5.2 % per year, and for the last 3 years('02~'04) 2.9% per year- the rate of increase has slowed. Looking at the standard gross income from mushroom production, it has increased 5.2% over the last nine years('95~'03), 1.6% over the last 4 years('00~'03), and 3.2% over the last 3 years('02~'04)-the annual gross income is decreasing. Even though the farmers are producing more mushrooms, the annual gross income is not increasing enough to keep up with the production, and therefore the profitability of mushrooms is decreasing. Since 2002, the constant increase of the output of edible mushrooms such as the Common Mushroom, Oyster Mushroom, King Oyster Mushroom and Winter Mushroom has resulted in a price declines. Before 2004, Korea mainly exported mushrooms, but after 2004 Korea mainly imported mushrooms. The mushroom industry of Korea is nearing the end of the stage of 'supplying domestic demand.' The stages are as follows: demand raised ${\rightarrow}$ supply domestic demand ${\rightarrow}$ export ${\rightarrow}$ country with developed mushroom industry. Therefore, we should have an efficient system to promote the exportation of mushrooms. Not only the exportation of mushroom itself but also the exportation of mushroom spawn, cultivation techniques and processing facilities should be our goal when we formulate the policy.

  • PDF

Survey of vegetation in experimental stand of Chungju (충주 연습림 식생 조사)

  • Song, Cheelyoung;Lee, Kyounghyoung;Lee, Iose;Lee, Seungwoo;Park, Bumjin;Kim, Suna;Lee, Wook;Joen, Yang
    • Korean Journal of Agricultural Science
    • /
    • v.23 no.2
    • /
    • pp.182-187
    • /
    • 1996
  • Herbal and woody plants were surveyed in native and artifitial stands of experimental forest and stand within the vicinity of belongings facilities in Chungju Experimental Forest, Chungnam National University. Appearance species were classified and taken a photograph of. There were a total of 135 kinds, 60 familia, 113 genus, 123 species, 12 variatas. 49 kinds of them were herbs, 86 kinds were woody plants, and 7 kinds were evergreen trees. We try to solve the problem that species of plant could be sustained going on and be diversified.

  • PDF