• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.47-54
• /
• 2014

Nanotechnology has become one of the fastest developing technologies and recently applied to a variety of industries. Thus, increasing number of nano materials including various nanoparticles would be discharged into wastewater and consequently entering a biological wastewater treatment process. However, the impact of the nano particles on biological wastewater treatment has not been estimated intensively. In this research, we investigated the effect of silica nanoparticle on the oxygen uptake rates (OURs) of activated sludge used in a conventional wastewater treatment process. The inhibition (%) values were estimated from the results of OURs experiments for the silica nanoparticles with various sizes of 10-15, 45-50, and 70-100 nm and concentrations of 50, 250, and 500 ppm. As results, the inhibition value was increased as the size of silica nano particles decreased and the injected concentration increased. The maximum inhibition value was investigated as 37.4 % for the silica nanoparticles with the size of 45-50 nm and concentration of 50 ppm. Additionally, the effect of size and concentration on the inhibition should be considered cautiously in case that the aggregation of particles occurred seriously so that the size of individual particles was increased in aquatic solution.

• Ocean and Polar Research
• /
• v.36 no.3
• /
• pp.289-302
• /
• 2014

This paper aims to evaluate the indirect economic damages to anglers of the marine recreational charter caused by marine pollution associated with the Herbei Spirit vessel, which spilled 12,547 kl of crude oil in Taean coastal areas in December 2007. In order to evaluate the indirect cost to anglers of the charter fishing, consumer surplus for charter fishing is estimated using a Poisson model (PM), a negative binomial model (NBM), a truncated Poisson model (TPM), and a truncated negative binomial model (TNBM), which account for the characteristics of count data (non-negative discrete data), for individual travel cost method (ITCM). Because of over-dispersion problem in PM and TPM, NBM and TNBM are considered to be more appropriate statistically. All parameters such as income, fishing careers, travel cost and catch that are estimated are statistically significant and theoretically valid. Based on TNBM results, consumer surplus per trip and per person was estimated to be 277 thousand won, total consumer surplus per person and per year about 2.3 million won, and the marginal effect of consumer surplus on % changes in catch rate is about 33 thousand won. The consumer surplus was converted into total indirect economic damages for aggregation which are evaluated to be 125 billion won, reflecting the number of anglers and damage rate.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.7
• /
• pp.858-863
• /
• 2005

Sensor network is subject to novel problems and constraints because it is composed of thousands of tiny devices with very limited resources. The large number of motes in a sensor network means that there will be some failing nodes owing to the lack of battery in sensor nodes. Therefore, it is imperative to save the energy as much as possible. In this work, we propose energy efficient routing algorithm which is based on directed diffusion scheme. In the proposed scheme, some overloads required for reinforcing the gradient path can be effectively eliminated. Furthermore, in order to verify the usefulness of the proposed algorithm, several simulations are executed.

• Korean Journal Plant Pathology
• /
• v.10 no.2
• /
• pp.83-91
• /
• 1994

Stem tissues of tomato plants (cv. Kwanyang) inoculated with Phytophthora capsici were examined by light and electron microscopy to compare early cytological differences between comaptible and incompatible interactions of tomatoes with the fungus. Twenty four hours after inoculation, the compatible isolate S 197 colonized severely the epidermis, cortex, and xylem vessels of stem tissue, whereas only few fungal cells colonized the stem tissues inoculated with the incompatible isolate CBS 178.26. Fragmented plasma membrane, distorted chloroplast, degraded cell wall, remnants of host cytoplasm were early ultrastructural features of the damaged host cell observed both in the compatible and incompatible interaction, a number of vesicles were distributed in the space between fungal cell walls and plasma membrane. The degradation of host cell walls by P. capsici was more pronounced in the compatible than the incompatible interactions. The incompatible interactions of tomato cells with P. capsici were characterized by formation of host cell wall apposition in the cortical parenchyma cells, indicating that the apposition of electron-dense material from the host cell walls may function as a plant defense reaction to the fungus. The fungal cells encased by wall appositions had abnormal cytoplasm and separated plasma membranes. The haustorium which formed from the fungal hyphae did not further penetrate through the host wall apposition and cytoplasmic aggregation, especially in the incompatible reactions. In contrast, the haustorium of the compatible isolate S 197 was not encased by wall appositions.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.459-467
• /
• 1989

When the sufactants are dissolved in water, they associate to form micelles and solubilize oil inside the micelle to form swollen micelles. Although spherical aggregates like micelles and swollen micelles occupy the same regions in the phase diagram of water-oil-surfactant systems, they are treated in different viewpoint for the formation of such aggregates. Hence a unified thermodynamic formalism for the formation of such structure is presented in this study. In all cases, the to ideal solution theory is applied for dilute system and the energy of formation is expressed as the sum of hydrophobic interaction energy and surface energy due to surfactant film. From the model, critical micelle concentration (CMC), average aggregation number, and solubilization ratio are predicted and compared with the known experimental observation.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.5
• /
• pp.375-380
• /
• 2014

To enhance biocompatibility between the orthopedic implant stem and obsteoblast cells, bone-forming cells, micro-size holes are patterned in Ti plate surface. Initially, the house built laser power stabilization system is applied to the laser micro patterning machine to convince repeatable result. Various pulse widths are irradiated Ti plate and relationship between diameters of patterned holes and pulsed width is derived. Effect of multi pulse is observed and optimal pulse number is considered to avoid heat affected zone. After MG-63 osbeoblast cells are cultured, micro patterned Ti plates are compared with control plates. In SEM image, cells are well aligned and aggregation is observed in both 60, and $100{\mu}m$ patterned plates. Finally, free form surface stem model is prepared to test micro hole patterning.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.245-251
• /
• 2016

Despite the exponential throughput improvement in mobile communications systems, their ability to satisfy requirements of state-of-the-art and future applications of advanced metering infrastructure (AMI) is still under investigation. Challenges are mainly due to the inadequacy of third generation partnership project (3GPP) networks to support large amounts of devices simultaneously, while the number of AMI end-devices and the frequency of their data transmission increase with new AMI-based applications. In this introductory survey, innovative and future AMI applications and their communication requirements are first reviewed. Then, we identify challenges of 3GPP long term evolution (LTE) in enabling future AMI applications. More importantly, the latest improvements to LTE-A standard release 12 and 13 are reviewed and analyzed with regards to their potential to improve the quality of LTE-enabled AMI. It is found that 3GPP enhancements on machine type communications (MTC) standards will significantly enhance AMI communications. Beyond MTC specifications, non-MTC-specific enhancements such as carrier aggregation and multi-connectivity for user equipment will also contribute greatly to improving reliability and availability of AMI devices. The paper's focus is towards improved backhaul support for innovative and future AMI applications, beyond traditional automatic meter reading.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.330-333
• /
• 2004

Microsensor nodes is energy limited in sensor networks. If nodes had been stop in working, sensor network can't acquire sensing data in that area as well as routing path though the sensor can't be available. So, it's important to maximize the life of network in sensor network. In this paper, we look at communication protocol, which is modified by LEACH(Low-Energy Adaptive Clustering Hierarchy). We extend LEACH's stochastic cluster-head selection algorithm by a Position-based Selection (PB-Leach). This method is that the sink divides the topology into several areas and cluster head is only one in an area. PB-Leach can prevent that the variance of the number of Cluster-Head is large and Cluster-Heads are concentrated in specific area. Simulation results show that PB-Leach performs better than leach by about 100 to $250\%.$

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.1
• /
• pp.63-72
• /
• 1994

In the last years, several articles have been devoted to the study of the Law of Demeter in the object oriented programming. The Law of Demeter is a style rule that aims at eliminating unnecessary coupling among classes. Although a large number of studies have been made on the informal definitions, little is known about the formulation of the Law of Demeter. In this article, we define three relationships among classes i.e. inheritance, aggregation and association, and formulate the Law of Demeter. We also propose the algorithms to decide whether a given program satisfies the law and to transform an unfulfilled program into a fulfilled one.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.129-132
• /
• 2009

Monodisperse ZnS colloidal particles with precisely specified diameters over a broad size range were synthesized by controlled aggregation. Sub-10nm ZnS seed crystals were first nucleated at ambient temperature and then grown at an elevated temperature, which produced large polydisperse colloidal particles. Subsequent rapid thermal quenching and heating processes induced a number of secondary nucleations in addition to growing the large polydisperse microparticles which were finally removed by centrifugation and discarded at the completion of the reaction. The secondary nuclei were then aggregated further at elevated temperatures, resulting in colloidal particles which exhibited a nearly monodisperse size distribution. Particle diameters were controlled over a wide size range from 50 nm to 1 μm. Mie simulations of the experiment extinction spectra determined that the volume fraction of the ZnS is 0.66 in an aggregated colloidal particle and the colloidal particle effective refractive index is approximately 2.0 at 590 nm in water. The surface of the colloidal particles was subsequently coated with silica to produce ZnS@silica core-shell particles.