• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2607-2610
• /
• 2011

Monodispersed Ag/$TiO_2$ core/shell nanoparticles were synthesized in solution via colloid-seeded deposition process using Ag nanoparticles as colloid seeds and $Ti(SO_4)_2$ as Ti-source respectively. Silver nitrate was reduced to Ag nanoparticles with $N_2H_4{\cdot}H_2O$ in the presence of CTAB as stabilizing agent. The titania sols hydrolyzed by the $Ti(SO_4)_2$ solution deposited on the surface of Ag nanoparticles to form the Ag/$TiO_2$ core/shell nanoparticles. Inductively coupled plasma atomic emission spectrometry (ICP-AES) showed low amount of Ag ion leaching from the Ag/$TiO_2$ core/shell nanoparticles. The Ag/$TiO_2$ core/shell nanoparticles indicated excellent antibacterial effects against Escherichia coli and maintained long-term antibacterial property.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.313-319
• /
• 2014

This study was performed to obtain high conversion efficiency of $NH_3$ and minimize generation of nitrogen oxides using metal-supported catalyst with Ag : Cu ratio. Through structural analysis of the prepared catalyst with Ag : Cu ratio ((10-x)Ag-xCu ($0{\leq}x{\leq}6$)), it was confirmed that the specific surface area was decrease with increasing metal content. A prepared catalysts showed Type II adsorption isotherms regardless of the ratio Ag : Cu of metal content, and crystalline phase of $Ag_2O$, CuO and $CuAl_2O$ was observed by XRD analysis. In the low temperature($150{\sim}200^{\circ}C$), a conversion efficiency of AC_10 recorded the highest(98%), whereas AC_5 (Ag : Cu = 5 : 5) also showed good conversion efficiency(93.8%). However, in the high temperature range, the amounts of by-products(NO, $NO_2$) formed with AC_5 was lower than that of AC_10. From these results, It is concluded that AC_5 is more environmentally and economically suitable.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.390-390
• /
• 2009

마그네트론 스퍼터링법을 이용하여 n-i-p 구조의 플렉서블 실리콘 박막태양전지용 ZnO/Ag 후면전극을 stainless steel 기판위에 제조하고 증착온도와 Ag 박막의 두께 변화에 따른 광학적 특성변화를 조사하였다. ZnO/Ag 구조의 후면전극은 RF와 DC 마그네트론 스퍼터링으로 Ag 금속 및 ZnO:Al($Al_2O_3$ 2.5%) 세라믹 타겟을 이용하여 각각 제조하였으며 증착온도는 상온 ${\sim}500^{\circ}C$로, Ag 박막두께는 100 ~ 500 nm로 변화시켰다. 증착조건 변화에 따라 제조된 후면전극의 표면거칠기 및 형상변화를 Atomic Force Mircroscope (AFM)와 Scanning electron miroscopy (SEM)으로 분석하였으며 이에 따른 반사도 변화를 UV-visible-nIR spectrometry 측정을 통하여 조사하였다. 증착온도가 증가함에 따라 Ag 박막의 표면 거칠기는 점차로 증가하였으며 증착된 후면전극의 반사도도 함께 증가함을 알 수 있었다. Ag 박막의 두께 변화에 따른 반사도 변화와 n-i-p 구조의 플렉서블 실리콘 박막태양전지에 미치는 영향을 조사하였다.

• Korean Journal of Materials Research
• /
• v.13 no.8
• /
• pp.503-508
• /
• 2003

The purpose of this study is to investigate the effect of $V_2$$O_{5}$ addition on the Ag and Cu precipitation in the NiCuZn ferrite layers of 7.7${\times}$4.5${\times}$1.0 mm sized multi-layer chip inductors prepared by the screen printing method using 0∼0.5 wt% $V_2$$O_{5}$ -doped ferrite pastes. With increasing the $V_2$$O_{5}$ content and sintering temperature, Ag and Cu oxide coprecipitated more and more at the polished surface of ferrite layers during re-annealing at $840^{\circ}C$. It was thought that during the sintering process, V dissolved in the NiCuZn ferrite lattice and the Ag-Cu liquid phase of low melting point was formed in the ferrite layers due to the Cu segregation from the ferrite lattice and Ag diffusion from the internal electrode. During re-annealing at $840^{\circ}C$, the Ag-Cu liquid phase came out the polished surface of ferrite layers, and was decomposed into the isolated Ag particles and the Cu oxide phase during the cooling process.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.442-447
• /
• 2008

Ferroelectric samples of the 0.65Pb$(Mg_{1/3}Ta_{2/3})O_3-0.35PbTiO_3$ modified with $Ag_2O$ were prepared by sintering at $1200^{\circ}C$ for 4 h. The fractured surface of sintered pellets were examined by scanning electron microscopy(SEM). The dielectric constant, loss, and pyroelectric coefficient of the ceramics samples were determined. The dielectric and pyroelectric properties could be improved with the addition of small amount of $Ag_2O$ up to 0.2 mol%. The dielectric and pyroelectirc peak temperatures are continuously shifted to lower temperature with addition of small amounts of $Ag_2O$.

• Korean Journal of Materials Research
• /
• v.18 no.7
• /
• pp.389-393
• /
• 2008

Nano-sized $TiO_2$-60 wt% SrO composite powders were synthesized by a sol-gel method using titanium isopropoxide and $Sr(OH)_2\;{\cdot}\;8H_2O$ as precursors. 3, -5, -7 wt%Ag spot-coated $TiO_2$-60 wt% SrO composite powders were synthesized by a Ag electroless deposition method using $TiO_2$-60 wt% SrO composite powders calcined at $1050^{\circ}C$, which mainly exhibited the $SrTiO_3$phase. However, a small number of rutile $TiO_2$, $Sr_2TiO_4$ and $SrO_2$ phases were also detected. In the Ag spot-coated powders synthesized by electroless deposition, nano-sized particles about 5-25 nm in diameter adhered to the $TiO_2$-60 wt% SrO composite powders. The photocatalytic activity of Ag spot-coated $TiO_2$-SrO and $TiO_2$-SrO composite powders for degradation of phenol showed that all of $TiO_2$-SrO composite powders were highly active under UV light irradiation. 7 wt%Ag spot-coated $TiO_2$-60wt.%SrO composite powders had a relatively higher photocatalytic activity than did $TiO_2$-SrO composite powders under visible light.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.74-81
• /
• 2012

The Influence of temperature on the recovery reaction of silver in aqueous solution was investigated based on Pourbaix diagram constructed by thermodynamic calculation at different temperatures. It was observed that the stability of water is more strongly affected by pH variation and the stable region of ${Ag^+}_{(aq)}$ is diminished at higher temperature. It was shown that the recovery of $Ag_{(aq)}$ in the forms of $Ag_{(s)}$ and $Ag_2O_{3(s)}$ is more advantageous thermodynamically at lower temperature, however, the recovery of $Ag_{(aq)}$ in the forms of $Ag_2O_{(s)}$ 및 $Ag_2O_{2(s)}$ is more advantageous as temperature increases. The rise of temperature is considered to demote the recovery of silver thermodynamically in strong acidic condition ($pH{\leq}2$), but more silver is regarded to be recovered with temperature above pH 2. Finally, The recovery of silver in the elemental state is shown to be more sensitively influenced by temperature variation compared with the recovery of silver in its oxide form.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.33-36
• /
• 2015

It has increased several decades in the field of Indium Tin Oxide (ITO) transparent thin film, However, a major problem with this ITO thin film application is high cost compared with other transparent thin film materials[1]. So far, in order to overcome this disadvantage, we show that a transparent ITO/Ag/i-ZnO multilayer thin film electrode would be more cost-effective and it has not only highly transparent but also conductive properties. The aim of this research has therefore been to try and establish how ITO/Ag/i-ZnO multilayer thin film would be more effective than ITO thin film. Herein, we report the properties of ITO/Ag/i-ZnO multilayer thin film by using optical spectroscopic method and measuring sheet resistance. At a certain total thickness of thin film, sheet resistance of ITO/Ag/i-ZnO multilayer was drastically decreased than ITO layer approximately $40{\Omega}/{\Box}$ at same visible light transmittance. (minimal point $5.2{\Omega}/{\Box}$). Tendency, which shows lowly sheet resistive in a certain transmittance, has been observed, hence, it should be suitable for transparent electrode device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1989.06a
• /
• pp.52-55
• /
• 1989

The properties of sintered Ag-SnO$_2$contacts which contain the second oxide were investigated with hardeness, workability, electrical conductivity and are erosion. Ag-SnO$_2$contacts containing ZnO or Bi$_2$O$_3$have most excellent workability and arc erosion endurance.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.11-17
• /
• 2020

In this study, Ag-functionalized SnO₂ nanowires are presented for NO₂ gas sensitive sensors at low temperatures (50℃). SnO₂ nanowires were synthesized using vapor-liquid-solid method, and Ag metal particles were functionalized on the surface of SnO₂ nanowires using flame chemical vapor deposition method. As a result of the sensing test about Ag-functionalized SnO₂ nanowires based sensor, the response (R_g/R_a) to 10 ppm NO₂ was 1.252 at 50℃. We believe that metal-functionalizing is a one of good way to increase the feasibility about semiconductor gas sensor.