• Membrane Journal
• /
• v.27 no.4
• /
• pp.313-318
• /
• 2017

For the separation of olefins/paraffins, $Poly(ethylene oxide)(PEO)/AgBF_4/Al(NO_3)_3/Ag_2O$ composite membranes were prepared. When $Ag_2O$ was introduced, the initial selectivity and permeance of composite membranes were observed to be 13.7 and 21.7 GPU, respectively. The increase in performance compared to the initial performance of $PEO/AgBF_4/Al(NO_3)_3$ membrane (selectivity 13 and permeance 7.5 GPU) was thought to be due to the increase of Ag ion activity due to the addition of $Ag_2O$. However, performance degradation over time was observed, which was thought to be due to the polymer matrix PEO. Since the PEO polymer could not stabilize the $Ag_2O$ particles, the $Ag_2O$ particles becmae aggregated together as the solvent evaporates, and $Ag_2O$ acts as a barrier. As a result, the permeance decreases over time.

• Korean Journal of Agricultural Science
• /
• v.9 no.2
• /
• pp.453-460
• /
• 1982

In order to investigate the effect of $AgNO_3$ pretreatment on reducing $SO_2$ injury in leaves of Forsythia koreana, changes of pH, chlorophyll content, peroxidase activity, sulfur content, and stomatal behaviour in leaves were examined. 1. $AgNO_3$ sprayed at 200 ppm or above increased black spot development in lower epidermis of leaves. But pretreatment with 100 ppm $AgNO_3$ significantly reduced de foliation and visible injury rate of leaves exposed to $SO_2$. 2. $AgNO_3$ pretreatment prevented lowering pH and decreasing chlorophyll content induced by $SO_2$ injury in leaves. But both $AgNO_3$ pretreatment and $SO_2$ exposure increased peroxidase activity in leaves. 3. $AgNO_3$ pretreatment did not affect reducing $SO_2$ absorption and stomatal opening in leaves exposed to $SO_2$.

• Korean Journal Plant Pathology
• /
• v.1 no.1
• /
• pp.72-78
• /
• 1985

The effects of temperature. pH, carbon and nitrogen sources on the growth of Rhizoctonia solani were studied by using five hyphal anastomosis groups(four cultural types, 7 isolates) of the fungus. The ranges of optimum temperature were $20^{\circ}C$ in the AG 2-1, AG 2-2 and AG 4, and $25^{\circ}C$ in the AG 1-IA, AG 1-IB, AG 3, AG 5. The optimum pH for the mycelial growth was 6-7 in the fungus. Glucose in the AG 1-lA, AG 1-IB, AG 2-2, AG 3 and AG 5, sucrose in the AG 2-1 and fructose in the AG 4 were the most effective for the mycelial growth, but glycerine, cellulose and lactose were not effectively utilized as nutrients. $Ca(NO_3)_2$ in the AG 1-IA, AG 1-IB and AG 4, asparagine in the AG 2-1, $KNO_3$ in the AG 2-2 and $NaNO_3$ in the AG 5 were the best nitrogen sources for the mycelial growth, but $NH_4NO_3$ was not easily utilized by the fungus. Nitrate and organic nitrogens for the fungal growth were utilized better than ammonium nitrogen.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.158-163
• /
• 1985

The anodic oxidations of the Silver(I) / Silver(II) / Silver(III) system have been studied in aq. 2M $AgNO_3$ solution with Platinum and Carbon electrodes. It has been found that $Ag_7O_8NO_3$ can be produced at relatively higher current density. Deposited black Oxy-salt were analyzed with several methods such as oxidizing power, X-ray powder diffraction patterns, thermal analysis, and reduction curves. It decomposed to AgO upon being suspended in boiling water. AgO compound obtained from $Ag_7O_8NO_3$ were purer and denser than Alfa-product AgO.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.32-37
• /
• 2016

The poly(vinyl alcohol) $(PVA)/AgCF_3SO_3/Al(NO_3)_3$ electrolyte membrane was fabricated to prepare for highly permeable facilitated olefin transport membrane, compared with poly(vinylpyrrolidone) $(PVP)/AgCF_3SO_3/Al(NO_3)_3$ complex. In order to examine the characteristics of $PVA/AgCF_3SO_3/Al(NO_3)_3$ membrane, we used the analytical methods such as SEM, FT-IR, and FT-Raman. The best separation performance was observed at the mole ratio of 1 : 1 : 0.01 $PVA/AgCF_3SO_3/Al(NO_3)_3$ among various $Al(NO_3)_3$ concentration. As a result, the selectivity was 12 and mixed-gas permeability was 3.5 Barrer. Furthermore, the selectivity and permeability remained constant for up to 115 h.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.260-264
• /
• 2018

Poly (ethylene oxide) (PEO)/Ag nanoparticles (AgNPs)(precursor : $AgBF_4$)/p-benzoquinone (p-BQ) composite membrane was prepared for olefin/paraffin separation. As a result, the performance of composite membrane was observed to be maintained at selectivity of 10 and permeance of 15 GPU up to 100 hours. The performance of the membrane was maintained for 100 hours was attributable to that Ag ions could be converted into stable Ag NPs by addition of p-BQ. Furthermore, the surface was partially polarized by the electron acceptor p-BQ, resulting in the formation of olefin carrier. In this study, since the cost of $AgBF_4$ used as a precursor of Ag NPs was relatively higher, $AgNO_3$ was utilized. As a result, it was confirmed that $AgNO_3$ couldn't show the stable formation of nanoparticle, resulting in the poor separation performance.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.265-270
• /
• 2018

In previous studies, a poly(ethylene oxide)(PEO)/Ag nanoparicles (AgNPs)(precursor $AgBF_4$)/p-benzoquinone (p-BQ) composite membrane was prepared for olefin/paraffin separation and the performance of this composite membrane was maintained at a selectivity of 10 and a permeability of 15 GPU. However, since the price of $AgBF_4$ precursor is high, this study used $AgNO_3$ as a precursor of Ag nanoparticles which is competitive in terms of price. As a result, it was observed that the separation performance was not obtained because the existing $NO_3{^-}$ could surround AgNPs. In this study, we fabricated PEO, poly(vinyl alcohol)(PVA), and polyether block amide-1657 (PEBAX-1657) polymer composite membrane using electron acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) for separation performance even when $AgNO_3$ was used as a precursor of Ag nanoparticles. As a result, it was analyzed that the performance was not observed regardless of the influence of the polymer and the electron acceptor, indicating that the anion of the precursor plays a crucial role in the separation performance.

• Korean Membrane Journal
• /
• v.8 no.1
• /
• pp.36-42
• /
• 2006

We have prepared new water-swollen chitosan-$Ag^+$ complex membranes and studied their permeation and separation behavior for propylene and propane gases. The $Ag^+$ containing chitosan complex membranes were prepared from chitosan and $AgNO_3$ aqueous solution. The $AgNO_3$ and water content in the membrane were controlled by adjusting $AgNO_3$ concentration of casting solution. The permeation properties of propylene and propane were investigated as a function of $AgNO_3$ concentration, and various operation conditions. High permeability of above 17 barrer and high selectivity of above 170 could be obtained with the membranes prepared from 3 M $AgNO_3$ aqueous solution. Periodic regeneration test confirmed these membranes could be very useful for the separation of propylene/propane and other olefin/paraffin separation.

• Membrane Journal
• /
• v.31 no.1
• /
• pp.61-66
• /
• 2021

This study was a study on an facilitated transport membrane to replace the cryogenic separation method currently used in olefin/paraffin separation. Cost reduction is also a very important factor to commercialize facilitated transport membranes. However, AgBF4, which has been studied a lot, is a relatively expensive silver salt. To replace this, a PEBAX-2533/ AgCF3SO3/Al(NO3)3 composite film was prepared using relatively inexpensive AgCF3SO3. It was analyzed through SEM, FT-IR, and RAMAN. Through this study, it was confirmed that the polymer matrix affects the long-term stability.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.394-398
• /
• 1998

We have studied the effect of Ag additions on the microstructure and the related mechanical and supercon¬ducting properties of $ YBa_{2}$$Cu_{3}$$O_{7-\delta}$ (YBCO) superconductors. A 5-15 vol.% of Ag was added to YBCO in the forms of Ag and $AgNO_{3}$, powder and the resultant microstructural evolution was evaluated. It was observed that the strength and fracture toughness of YBCO increased with increasing Ag content. These improvements in strength and fracture toughness are believed to be due to the strengthening mechanisms caused by the presence of Ag. In addition, YBCO-Ag composite superconductors showed higher values of strength and fracture toughness when Ag was added in the form of AgNO, than those of which was added Ag. The higher mechanical properties of YBCO- Ag resulting from $AgNO_{3}$, addition are probably due to the microstructure of more finely and uniformly distributed Ag particles. The addition of Ag also showed slightly improved critical current density of YBCO superconductors.