• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.828-831
• /
• 2007

We evaluated the effects of heat treatment on various properties of onion extracts (Allium cepa). Onion was heated at various temperatures ($110-150^{\circ}C$) for various times (1-5 hr), and the total polyphenol, flavonoid, and free sugar contents, and antioxidant activity were investigated. With increased heating temperatures and exposure times, the total contents of polyphenols and flavonoids, as well as antioxidant activity increased. The highest total polyphenol content (189.80 mg/100g) occurred after heating for 2 hr at $140^{\circ}C$. The highest total flavonoid content (252.51 mg/100g) occurred after heating for 3 hr at $150^{\circ}C$. The antioxidant activity assessed using the DPPH method was highest, at 2.1 mg/mL ($IC_{50}$ value), after heating for 2 hr at $150^{\circ}C$. Correlations between antioxidant activity and the total polyphenol, total flavonoid, and fructose contents were highly significant (all p<0.01). The optimal heating time and temperature were 2 hr and $130^{\circ}C$.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.639-646
• /
• 2015

A treatment for improving the characteristics of a surface is very important in increasing the life of machine parts. Many studies have been carried out on the surface characteristics after such treatments. For enhanced eco-technology, an alternative to a conventional chemical surface treatment process is essential. Ultrasonic nano-crystal surface modification (UNSM) technology is a physical environmentally friendly surface treatment method. This technology was developed in domestic and currently being used. As the mechanism of UNSM technology, a ball tip attached to an ultrasonic vibration device strikes the metal surface at nearly 20,000 times per second. The resulting modified surface layer improves the surface characteristics. This paper describes a self-developed fast tool servo system applied to the UNSM process as a vibration module within a high-frequency bandwidth. After describing the surface modification process based on the material and process changes, the surface characteristics are compared.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.132-137
• /
• 2015

The purpose of this paper was to investigate the effects of solution treatment time and Sr-modification on the microstructure and property of the Al-Si piston alloy. It was found that as-cast microstructures of unmodified and Sr-modified Al-Si alloys consisted of a coarse acicular plate of eutectic Si, $Cu_3NiAl_6$ and $Mg_2Si$ phases in the ${\alpha}$-Al matrix but different in size and morphology. Both size and inter-particle spacing of Si particles were significantly changed by increasing of the solution treatment time. After a short solution treatment, the coarse acicular plate of the eutectic Si appears to be fragmented. Fully modified microstructure of Sr-modified alloy can reduce the solution treatment time to shorter compared to unmodified alloy. The maximum of a peak hardness value is found in the very short solution treatment of both Al-Si piston alloys. Compared to 10 h solution treatment, the solution treatment of 2-4 h is sufficient to achieve appropriate microstructures and hardness. The short solution treatment is very useful to increase the productivity and to reduce the manufacturing cost of the Al-Si piston alloys.

• Journal of Technologic Dentistry
• /
• v.45 no.3
• /
• pp.55-60
• /
• 2023

Purpose: This study aimed to evaluate the effects of a special heat treatment on Pd-Au-Ag metal-ceramic alloy after degassing treatment and on changes in the hardness of the alloy during the firing process. Methods: Specimen alloys were cast and subjected to degassing at 900℃ for 10 minutes. These specimens were then subjected to a special heat treatment at 600℃ for 15 minutes in a dental porcelain furnace. Further, the specimens were subjected to simulated firing in the porcelain furnace. The resulting specimens were then tested for hardness, and changes in the microstructure were observed. Results: There was a decrease in the hardness of the alloy during the simulated firing of the cast alloy due to the coarsening of the particles. Meanwhile, additional heat treatment after degassing was found to play a crucial role in preventing a decrease in hardness. This treatment effectively suppressed the coarsening of the precipitates during repeated firing at high temperatures. Conclusion: Specific heat treatment of the Pd-Au-Ag metal-ceramic alloy prevented a decrease in its hardness and extended the lifespan of the metal-ceramic prosthesis.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.639-645
• /
• 2012

The purpose of this study is to identify the possibility of the CMP wastewater treatment from semiconductor fabrication under operating tubular membrane with coagulants. To find suitable coagulants treating CMP wastewater, we conducted Jar-test. After Jar-test experiments suitable coagulants are PAC(17%), $Ca(OH)_2$ and optimum coagulant dosage is PAC(17%) 10mg/L, $Ca(OH)_2$ 110 ~ 120mg/L. Based on these results, the tubular membrane was applied to CMP wastewater, the turbidity removal efficiency is $Ca(OH)_2$ > PAC(17%) > Nothing. The fast cross-flow velocity and backwash process what are operating characteristics of tubular membrane can be stable CMP wastewater treatment. But when the coagulant and tubular membrane are used at the same time, the withdraw and treatment of the CMP wastewater are possibile. However further treatment process needs if treated water will be used for semiconductor fabrications.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.24
• /
• pp.4-20
• /
• 2008

Stainless steel 304 or stainless steel 630 types using propeller shaft of a small ship or a FRP fishing boat generally restrain localization corrosion and abrasion damage occurrence to shaft bearing or grand packing contact. In general, the residual stress which remains after welding or heat treatment in material can cause the stress concentration or localization corrosion. In case of small ship, stainless steel such as STS304 has long been used for propeller shaft. Meanwhile, crew of small ship tend to reuse damaged propeller shaft after repair by welding and performing heat treatment to save cost. However, it was found that reused propeller shaft by repair often caused troubles in ship's operation. In this study, the basic guideline for maintenance and treatment of propeller shaft are investigated. From the results of investigation, remarkable deterioration of the material properties and corrosion resistance on the welded work part was observed.

• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.34-39
• /
• 2013

This study was performed to investigate the antioxidant activity of mung beans with heat treatment at $130^{\circ}C$ for 2 h after acid hydrolysis. The browning index of heating after hydrolysis was 2.31 whereas heating before hydrolysis was 0.17. 5-hydromethyl-2-furaldehyde (5'-HMF) content was the highest value of 81.61 mg/g in heating after hydrolysis. The highest total polyphenol content (55.95 mg/g) occurred in heating after hydrolysis and this value was 6.4-fold higher than that of heating before hydrolysis (8.79 mg/g). 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging activity was the highest value of 22.19 mg AA eq/g sample in heating after hydrolysis whereas heating before hydrolysis was 1.75 mg AA eq/g sample.1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity was the highest value of 3.64 mg Trolox eq/g sample in heating after hydrolysis whereas heating before hydrolysis was not shown. These results suggest that heat treatment of mung beans for increasing the antioxidant activity could be effective after hydrolysis.

• Journal of Animal Science and Technology
• /
• v.47 no.3
• /
• pp.409-418
• /
• 2005

This study was conducted to examine the nutrient digestibility and ruminal fermentation characteristics in sheep fed dried mugwort and mugwort silage for 5% levels of rice straw in the basal diet, and mugwort pellet for 5% levels of concentrate in the basal diet. For the experiment, they were given a basal diet containing of rice straw and concentrate mixed at a 3: 7 ratio (DM basis). The treatments were designed as a 4 ${\times}$ 4 Latin square design with four sheep (50.2 kg body weight). The digestibility of crude protein was increased (p < 0.05) to 4.6 - 6.2 % in sheep fed mugwort silage treatments (60.23 %) compared with those of control (54.08 %) and dried mugwort treatment (55.67 %). That of ether extract was iicreased (p < 0.05) to 4.8 - 8.8 % in sheep fed mugwort silage treatments (80.22 %) compared with those of control (71.47 %) and dried mugwort treatment (75.46 %). In the dry matter intake, mugwort silage treatment (904.44 g) was the hightest and mugwort pellet treatment, dried mugwort treatment and control were 810.66 g, 780.66 g and 742.18 g, respectively. The ruminal pH in all treatments were rapidly decreased (p < 0.05) at 0.5 and 1 hour after feeding and slowly increased at 2, 4 and 8 hours after feeding, especially mugwort silage treatment. The ammonia nitrogen concentrations were the highest (p < 0.05) in sheep fed mugwort silage treatment (11.24 - 12.05mg / 100 rnz) at 0.5 and 2 hours after feeding. The ruminal concentrations of acetic acid (6.06 mmol /100 $m\ell$) and propionic acid (2.35 mmol/ 100 mz) were an increased (p < 0.05) at the mugwort silage treatments at 1 and 2 hours after feeding. Purine derivatives out put (13.41 mmol / d) and microbial protein production (11.61 mmol / d) were increased (p < 0.05) compared with those of control (5.42 and 4.93 mmol / d).

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.2
• /
• pp.41-48
• /
• 2018

In this study, microstructural changes due to extrusion, rolling and heat treatment were studied to fabricate Al-4.0wt%Zn-1.5wt%Mg-0.9wt%Cu alloys with homogeneous microstructure suitable for metal cases of smart phones and electronic products fabricated through plastic working. After extrusion microstructure and texture were developed very differently on the surface and inside. Inside, coarse grains were formed and a strong Cube component orientation was developed. On the surface, a weak texture was developed with small grains. After 72% cold rolling the intensity of the Cube component orientation was lower, and uniform texture was developed in all the layers and the R-value was uniformly predicted. After recrystallization, the grain size difference between at the surface and the inside is smaller, when 72% rolling was performed, indicating that a uniform structure is formed. Texture develops almost randomly after recrystallization and exhibits uniform R-values at all layers.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.2
• /
• pp.73-77
• /
• 2004

The efforts which increase the strength of the auto-body structure and decrease its weight lead to develop a new concept of part production systems, such as Post-Form Strengthening by induction heat treatment. In this study, several cold and hot-rolled sheet steels were used to find out optimum induction heat treatment conditions. After induction heat treatment, strength of heat-treated sheet steels was increased significantly compared with that of as-rolled steels. From these results, auto-body structure which has more light and safe has been made by using this induction hardening method.