• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.187-190
• /
• 2007

This study is for analyzing best band in image matching using correlation coefficient of left and right images of stereo image pair, lot red, green, blue band images separated from color aerial photo and gray image converted from the same color aerial photo image. The image matching is applied to construct Digital Elevation Model(DEM) or terrain data. The correlation coefficients and variation by change of pixel patch size are computed from pixel patches of which sizes are $11{\times}11{\sim}101{\times}101$. Consequently, the correlation coefficient in red band image is highest. The lowest is in blue band. Therefore, to construct terrain data using image matching, the red band image is preferable. As the size of pixel patch is growing, the correlation coefficient is increasing. But increasing rate declines from $51{\times}51$ image patch size and above. It is proved that the smaller pixel patch size than $51{\times}51$ is applied to construct terrain data using image matching.

• Agricultural and Biosystems Engineering
• /
• 제3권1호
• /
• pp.18-28
• /
• 2002

Neural network based models were developed and evaluated for predicting corn yield from aerial images based on 1998 and 1994 image data. The model used images in multi-spectral bands such as R, G, B, and IR (Red, Green, Blue and Infrared). The inputs to the neural network consisted of mean and standard deviation of multispectral bands of the aerial images. Performances of several neural network architectures using back-propagation with momentum were compared. The maximum yield prediction accuracy obtained was 97.81%. The BPNN model prediction accuracy could be enhanced by using more number of observations to the model, other data transformation techniques, or by performing optical calibration of the aerial image.

• 대한토목학회논문집
• /
• 제32권2D호
• /
• pp.129-136
• /
• 2012

무인항공기(UAV: Unmanned Aerial Vehicle), 헬리콥터, 항공기를 이용하여 실시간 교통자료를 수집하는 항공 기반 차량 검지시스템(ADS: Aerial-Based Vehicle Detection System)에 관한 연구가 미국, 일본, 독일에서 이루어져 왔다. 따라서 본 연구에서는 ADS의 교통자료 수집 시스템으로 활용 가능성을 검토하기 위하여 먼저 ADS에 의하여 수집된 자료가 이미지프로세싱 등 자료추출 기법을 거쳐 통행속도 등 교통정보를 산출할 수 있는 지를 확인하였다. 다음으로는 ADS에 의하여 수집된 자료의 신뢰성 정도가 교통정보 제공에 적합한 지를 확인하였다. 그 결과 ADS는 기존에 상시적으로 실시간 교통정보 제공을 하기 위하여 사용되고 있는 VDS 등을 대체하기에는 기술적 비용적 측면에서 어려움이 있을 것으로 파악되었다. 하지만 재해 발생 등 비반복적 교통상황이 장시간 발생할 경우 비상교통관리대책 등을 세우기 위한 보완적 방안으로 활용할 수 있을 것이다.

• 한국측량학회지
• /
• 제30권1호
• /
• pp.49-58
• /
• 2012

도심지의 빌딩들은 시간이 갈수록 형태가 다양해지고, 식생이나 도로와 같은 객체들과 유사한 분광 특성을 나타냄으로써 광학 영상만을 이용하여 추출하기가 어려워지고 있다. 본 연구에서는 이러한 문제를 해결하기 위해 항공 Light Detection and Ranging(LiDAR) 자료와 항공 사진의 융합을 통해 항공 사진상에서의 빌딩과 그 경계를 추출하는 방법을 제안한다. 먼저 항공 사진에 Adaptive dynamic range linear stretching 방사 강조 기법을 적용하고, 에디슨 에지 디텍터를 이용하여 이진 경계 지도를 생성하였다. 동시에 항공 LiDAR 자료로부터 normalized Digital Surface Model을 생성하고, 빌딩 영역을 추출하여 이진 경계 지도와의 중첩을 통해 임시 빌딩 영역을 추출하였다. 마지막으로 항공 LiDAR 자료와 항공 사진 간의 위치 오차를 고려하여 경계 강화 과정을 수행함으로써 최종 빌딩 경계를 추출하였다. 제안 방법의 검증을 위해 두 개의 실험 지역을 선정하여 제안 방법을 적용하였고, 정량적인 정확도평가에서 F-measure, Jaccard coefficient, Yule coefficient, Overall accuracy의 값이 모두 0.85 이상의 정확도를 보여주었다.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.131-136
• /
• 1999

Aerial videography techniques have been used to inventory conditions associated with grassland, forests, and agricultural crop production. Most recently, aerial videography has been used to verity satellite image classifications as part of the natural ecosystem survey. The objectives of this study were: (1) to use aerial video images of the study area, one part of Taean Seashore National Park, for the accuracy assessment, and (2) to determine the suitability of aerial videography as an accuracy assessment, of the land cover classification with Landsat-TM data. Video images were collected twice, summer and winter seasons, and divided into two kinds of images, wide angle and narrow angle images. Accuracy assessment methods include the calculation of the error matrix, the overall accuracy and kappa coefficient of agreement. This study indicates that aerial videography is an effective tool for accuracy assessment of the satellite image classifications of which features are relatively large and continuous. And it would be possible to overcome the limits of the present natural ecosystem survey method.

• 대한공간정보학회지
• /
• 제8권2호
• /
• pp.89-99
• /
• 2000

수치사진측량시스템(Digital Photogrammetry System)환경 내에서 일어나는 모든 작업은 수치영상을 기본 자료로 이용하게 되므로 수치영상의 품질과 정확도는 수치사진측량의 정확도를 좌우하는 중요한 요소 중에 하나이다. 그림에도 불구하고 현재까지는 수치사진측량 환경의 작업 수행 시 수치영상의 품질이나 정확도에 관한 명확한 기준이 설정되어 있지 않아 자료의 활용성 및 품질을 화보하기 어려운 실정이다. 본 연구에서는 수치사진측량을 이용하여 항공사진영상 데이터베이스를 구축할 경우 선행되어질 항공사진의 수치영상화시 최적해상도를 제시하고자 자동내부표정을 통하여 최적 해상도를 결정하였고, 다음으로 표정해석을 통하여 최적해상도를 검증 하고자 하였다. 그리고 앞서 결정된 최적해상도의 수치영상을 활용하여 정사투영영상이나, 모자이크영상을 제작함으로 그 타탕성을 입증 하고자 하였다.

• 농촌계획
• /
• 제27권4호
• /
• pp.55-70
• /
• 2021

In this study, in the field of remote sensing, where the scope of application is rapidly expanding to fields such as land monitoring, disaster prediction, facility safety inspection, and maintenance of cultural properties, monitoring of rural space and surrounding environment using UAV is utilized. It was carried out to verify the possibility, and the following main results were derived. First, the aerial image taken with an unmanned aerial vehicle had a much higher image size and spatial resolution than the aerial image provided by the National Geographic Information Service. It was suitable for analysis due to its high accuracy. Second, the more the number of photographed photos and the more complex the terrain features, the more the point cloud included in the aerial image taken with the UAV was extracted. As the amount of point cloud increases, accurate 3D mapping is possible, For accurate 3D mapping, it is judged that a point cloud acquisition method for difficult-to-photograph parts in the air is required. Third, 3D mapping technology using point cloud is effective for monitoring rural space and rural resources because it enables observation and comparison of parts that cannot be read from general aerial images. Fourth, the digital elevation model(DEM) produced with aerial image taken with an UAV can visually express the altitude and shape of the topography of the study site, so it can be used as data to predict the effects of topographical changes due to changes in rural space. Therefore, it is possible to utilize various results using the data included in the aerial image taken by the UAV. In this study, the superiority of images acquired by UAV was verified by comparison with existing images, and the effect of 3D mapping on rural space monitoring was visually analyzed. If various types of spatial data such as GIS analysis and topographic map production are collected and utilized using data that can be acquired by unmanned aerial vehicles, it is expected to be used as basic data for rural planning to maintain and preserve the rural environment.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 추계학술발표대회
• /
• pp.52-54
• /
• 2022

Aerial images are being one of the important aspects of satellite imagery, delivers effective information on landcovers. Their special characteristics includes the viewpoint from space which clarifies data related to land examining processes. Aerial images taken by satellites employed radio waves to wirelessly transmit images to ground stations. Due to transmission errors, images get distorted and unable to perform in landcover examining. This paper proposes an aerial image enhancement method using deep autoencoders. A properly trained autoencoder can enhance an aerial image to a considerable level of improvement. Results showed that the achieved enhancement is better than that was obtained from traditional image denoising methods.

• 한국측량학회지
• /
• 제33권3호
• /
• pp.173-179
• /
• 2015

In this paper, object-based classification of urban areas based on a combination of information from lidar and aerial images is introduced. High resolution images are frequently used in automatic classification, making use of the spectral characteristics of the features under study. However, in urban areas, pixel-based classification can be difficult since building colors differ and the shadows of buildings can obscure building segmentation. Therefore, if the boundaries of buildings can be extracted from lidar, this information could improve the accuracy of urban area classifications. In the data processing stage, lidar data and the aerial image are co-registered into the same coordinate system, and a local maxima filter is used for the building segmentation of lidar data, which are then converted into an image containing only building information. Then, multiresolution segmentation is achieved using a scale parameter, and a color and shape factor; a compactness factor and a layer weight are implemented for the classification using a class hierarchy. Results indicate that lidar can provide useful additional data when combined with high resolution images in the object-oriented hierarchical classification of urban areas.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.899-902
• /
• 2006

For a quick and accurate 3D modelling of a building, laser scanning data, digital maps, aerial photographs and satellite images should be fusioned. Moreover, library establishment according to a standard structure of a building and effective texturing method are required in order to determine the structure of a building. In this study, we made a standard library by categorizing Korean village forms and presented a model that can predict a structure of a building from a shape of the roof on an aerial photo image. We made an ortho image using the high-definition digital image and considerable amount of ground scanning point cloud and mapped this image. These methods enabled a more quick and accurate building modelling.