• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.1
• /
• pp.61-72
• /
• 2019

With the diversification of research using UAV(Unmanned Aerial Vehicle)s, the possibility of remote sensing research for urban green spaces is increasing. UAVs can be used as an investigation method to monitor the successful construction of the park and the planting of vegetation since its creation. This study was carried out to investigate UAVs utilization of urban green space monitoring in Dosol Square. It was photographed three times on May 21, July 13, and September 16, 2018 using DJI Phantom3 pro, Inspire2, and Parrot Sequoia multispectral camera. Orthographic images were overlaid on the planting plan of the site and the construction results were checked, the change of vitality of the plantation area was analyzed by NDVI(Normalized Difference Vegetation Index) and SAVI(Soil Adjusted Vegetation Index). As a result, it was confirmed that the UAVs are very effective for surveying the view of the urban green space after the construction and recording the results, which can be grasped quantitatively by overlaying the planting plan map. UAVs are more likely to be used in terms of monitoring vegetation vitality. It is interpreted that SAVI is better than NDVI in the green space just after composition. Chionanthus retusus and Pinus strobus were analyzed for their low level of vitality, and partially damaged and their vitality was lowered. In addition, there was difficulty in grass planting area and flower garden due to drainage and summer drought problems. In the future, it is expected that orthoimage and multispectral data using UAVs will be useful in the early vegetation monitoring and management field of urban green spaces.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.475-483
• /
• 2015

This study examined the feasibility of using an automatic lens distortion correction (ALDC) camera as the payload for a photogrammetric unmanned aerial vehicle (UAV) system. First, lens distortion for the interior orientation (IO) parameters was estimated. Although previous studies have largely ignored decentering distortion, this study revealed that more than 50% of the distortion of the ALDC camera was caused by decentering distortion. Second, we compared the accuracy of bundle adjustment for camera calibration using three image types: raw imagery without the ALDC option; imagery corrected using lens profiles; and imagery with the ALDC option. The results of image triangulation, the digital terrain model (DTM), and the orthoimage using the IO parameters for the ALDC camera were similar to or slightly better than the results using self-calibration. These results confirm that the ALDC camera can be used in a photogrammetric UAV system using only self-calibration.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.7-13
• /
• 2001

Geospatial Information Systems (GIS) have been employed to systematically manage and design land use in urban areas. This has increased the need for more accurate vector and raster data. In Korea, l/l,000-scale digital maps are used as vector data for the facility management in urban areas. This has increased the need for large scale orthoimages. Orthoimages generated from aerial imagery can provide accurate information, making possible the more effective city management. However, there is a large problem in using the orthoimages, i.e., currently available conventional orthoimages have not been generated based on Digital Elevation Model (DEM) that takes into account the building heights. So this causes the displacements of building image in large scale orthoimages. The present study is an attempt to generate the large scale orthoimages based on building DEM. The semiautomatic building extraction method can detect building outlines by mouse clicking on either building roofs or corners. Building DEM, based on the outline and calculated building height, was used to produce the large scale orthoimages with the corrected building occlusion.

• Spatial Information Research
• /
• v.19 no.1
• /
• pp.51-59
• /
• 2011

We produced true ortho images after interpolating occlusion areas and relief displacement of building as well as producing ortho-images to use backward image of ADS which is a aerial digital camera of line type. Also, I was able to produce high quality ortho-images using a small mount of Ground Control Points(GCP) relatively to compare to frame type camera from the evaluation of horizontal position accuracy using ground check points, photo control points for the verification of ortho-images and true-ortho images. Also, I was able to verify the effectiveness in interpolating occlusion areas cause the length overlap was 100% when producing true-ortho images of line type camera.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.13-19
• /
• 2002

In a different way of satellite image or aerial photo, the image acquired by terrestrial photogrammetry has to go through complicated management according to the desired precision and analysis range. In this study, digital surface model and ortho image for cultural asset, terrestrial structures, were made by reflectorless total station in order to increase the application of single photo, and that was analyzed and compared with the method using stereo image. Single photo is expected to be utilized as the measuring method for drawing cultural assets or examining the stability of slope in which high precision doesn't need by performing the various geometric and visual analysis using ortho image made by excluding the difficulties of acquisition and plotting of stereo image.

• Korean Journal of Remote Sensing
• /
• v.22 no.2
• /
• pp.131-139
• /
• 2006

IKONOS images have the perspective geometry in CCD sensor line like aerial images with central perspective geometry. So the occlusion by buildings, terrain or other objects exist in the image. It is difficult to detect the occlusion with RPCs(rational polynomial coefficients) for ortho-rectification of image. Therefore, in this study, we detected the occlusion areas in IKONOS images using the nominal collection elevation/azimuth angle and restored the hidden areas using another stereo images, from which the rue ortho image could be produced. The algorithm's validity was evaluated using the geometric accuracy of the generated ortho image.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.568-573
• /
• 2018

UAV(Unmanned Aerial Vehicle) is widely used in space information construction, agriculture, fisheries, weather observation, communication, and entertainment fields because they are cheaper and easier to operate than manned aircraft. In particular, UAV have attracted much attention due to the speed and cost of data acquisition in the field of spatial information construction. However, ortho image images produced using UAVs are distorted in buildings and forests. It is necessary to solve these problems in order to utilize the geospatial information field. In this study, fixed wing, rotary wing, vertical take off and landing type UAV were used to detect distortions of ortho image of UAV under various conditions, and various object areas such as construction site, urban area, and forest area were captured and analysed. Through the research, it was found that the redundancy of the unmanned aerial vehicle image is the biggest factor of the distortion phenomenon, and the higher the flight altitude, the less the distortion phenomenon. We also proposed a method to reduce distortion of orthoimage by lowering the resolution of original image using DTM (Digital Terrain Model) to improve distortion. Future high-quality unmanned aerial vehicles without distortions will contribute greatly to the application of UAV in the field of precision surveying.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.352-352
• /
• 2017

Recently, the South Korean government encourages the cultivation of upland crops in the paddy field to maintain an adequate level of rice production and then to balance the demand and supply of rice. This is mainly because the rice consumption per capita per year has continued to decline from 135 kg in 1979 to 61.9 kg in 2016, although the rice production was relatively stable. As a result, the rice overproduction became a big social problem. As a part of that, various upland crops such as soybean, maize, minor cereals and forage crops are planted in the paddy field 10 years ago. The cultivation of these crops may settle the problem of short supply and mass import of the crops to some extent. However, a systematic remote observation of upland crops in the paddy field is very scarce. This study investigated the cultivation status of upland crops and any changes of crop harvesting in the paddy field by using an unmanned aerial vehicle (UAV). Also, we analyzed the kind of upland crops and cultivation area in the paddy field by utilizing time series observation images. A fixed wing UAV is used for the investigation. This is because it is easy to use the flight operation and to control flight management software, and it can automatically cope with various emergency states such as a strong wind and battery discharge. The material of UAV is expanded polypropylene, which has an advantage of less equipment damage and risk during takeoff and landing. We acquired observed images in Buljeong-myeon, Goesan-gun, Chungcheongbuk-do, South Korea by using fixed wing UAV in 2015 and 2016. The total investigated area reaches 6,045 ha, and among them the agricultural area was 1,377 ha. For the next step, we created an orthoimage from all images taken using Pix 4D mapper program. According to the results of image analyses in 2015, the paddy field covered total 577 ha (75.9%) with crop plant. The cultivation area of beans, ginseng, maize, tobacco and peach was 256 ha (36.6%), 63 ha (9.2%), 37 ha (5.4%), 31 ha (4.5%) and 27 ha (3.8), respectively. And in 2016, the total covered area was 586 ha (77.1%), and it was comprised of 253 ha (35.5%), 88 ha (12.3%), 29 ha (4.1%), 22 ha (3.1%) and 32 ha (4.5%) in the same order. In this study, we focused on identifying the paddy field which was converted to the cultivation of upland crops by using UAV. And, it has been indicated that the cultivation area of rice decreased from 141 ha in 2015 to 127 ha in 2016, although that of ginseng increased by 25 ha. As a result, it is expected that a lot of paddy field could be replaced by high-income crops such as ginseng and fruit tree (peach) instead of relative low-income rice. More specific and widespread research on the remote sensing in the paddy field needs to be done.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.151-159
• /
• 2013

The building information should be up-to-date information and propagated rapidly for urban modeling, terrain analysis, life information, navigational system, and location-based services(LBS), hence the most recent and updated data of the building information have been required of researchers. This paper presents the developed system to extract the 3-dimension spatial information from aerial orthoimage and LiDAR data of HSI color model. In particular, this paper presents the image processing algorithm to extract the outline of specific buildings and generate the building polygon from the image using HIS color model, recursive backtracking algorithm and the search maze algorithm. Also, this paper shows the effectivity of the HIS color model in the image segmentation.

• Spatial Information Research
• /
• v.23 no.3
• /
• pp.91-100
• /
• 2015

We developed a micro UAV based rapid mapping system that provides geospatial information of target areas in a rapid and automatic way. Users can operate the system easily although they are inexperienced in UAV operation and photogrammetric processes. For the aerial data acquisition, we constructed a micro UAV system mounted with a digital camera, a GPS/IMU, and a control board for the sensor integration and synchronization. We also developed a flight planning software and data processing software for the generation of geo-spatial information. The processing software operates automatically with a high speed to perform data quality control, image matching, georeferencing, and orthoimage generation. With the system, we have generated individual ortho-images within 30 minutes from 57 images of 3cm resolution acquired from a target area of $400m{\times}300m$.