• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.324-330
• /
• 2014

In this study, the numerical model developed by Hong et al.(2008) was improved to be applied to rapidly varying flows such as the inundation of dry land or flow transitions due to large gradients of the bathymetry. A numerical approximation was applied that was consistent with the conservation of momentum in flow expansions and with the Bernoulli equation in flow contractions. The approximation was second order, but the accuracy reduced to first order near extreme values by the use of a minmod limiter. The modified model was verified by acomparison with the theoretical critical depth of weir, and for sufficiently smooth conditions and a fine grid size, both approximations converged to the same solution. In terms of the grid size, it was more effective at obtaining solutions than the previous model and reproduced the inundation of dry land.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.57-62
• /
• 2004

Streamline simulation researches have been extensively accomplished due to the swiftness of computation and the reduction of numerical dispersion. In this study, we developed a streamline simulation model using a semianalytical solution of ID transport equation. To validate accuracy of the developed model, we compared simulation results of contaminant transport, which were acquired by streamline simulation models using an analytical solution, a numerical solution, and a semianalytical solution. The developed model using the semianalytical solution matched well with the model using an analytical solution. However, streamline simulation model using a numerical solution showed numerical dispersion. For an advection-dominant flow, there was little difference in the simulation results between the developed model and tile analytical model, but the differences between the analytical model and the numerical model were cleary shown. From the comparison of computing time we know that the streamline simulation using the semianalytical solution is 2-60 times as fast as the streamline simulation using the numerical solution.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.3
• /
• pp.162-168
• /
• 1992

Numerical solutions to the advection equations used for long-range transport air pollution models are calculated using three numerical methods; Antidiffusion correction method(Smolarkiewicz, 1983), Positive definite advecton scheme obtained by nonlinear renormalization of the advective fluxes(Bott, 1989), and Positive definite pseudospectral method(Bartnicki, 1989). Accuracy, numerical diffusion and computational time requirement are compared for two-dimensional transport calculations in a uniform rotational flow field. The solutions from three methods are positive definite. Bartnicki(1989)'s method is most conservative but requires approximately 10 times as much computational time as Smolarkiewicz(1983)'s method of which numerical diffusion is the largest. All three methods are more conservative for a cone shape initial condition than for a rectangular block initial condition with a steep gradient.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1060-1067
• /
• 2006

Sandy soils are generally used as a capping material to reduce the pollutants transport from the contaminated dredged sediment. However, dredged material capping is not widely used because regulatory agencies are concerned about the potential for contaminants migration through the cap. Movement of contaminated pore water from sediment into cap is mainly related to sediment consolidation during and after cap placement. To evaluate the significance of consolidation induced transport of contaminants from sediment into cap, research centrifuge tests were conducted. Centrifuge test results illustrate that advection and dispersion are the dominant contaminants transport processes and that capping reduces the potential of contaminant migration from the dredged sediment effectively.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.109-114
• /
• 2010

Interface tracking of two phase is significant to analyze multi-phase phenomena. The VOF(Volume of Fluid) and level set are well known interface tracking method. However, they have limitations to solve compressible flow and incompressible flow at the same time. CIP(Cubic Interpolate Propagation) method is appropriate for considering compressible and incompressible flow at once by solving the governing equation which is divided up into advection and non-advection term. In this article, we analyze the droplet impingement according to various We number using improved CIP method which treats nonlinear term once more comparison with original CIP method. Furthermore, we compare spread radius after droplet impingement on the wall with the experimental data and original CIP original CIP method, and it reduces the mass conservation error which is generated in the numerical analysis comparison with original CIP method.

• Nuclear Engineering and Technology
• /
• v.29 no.4
• /
• pp.320-326
• /
• 1997

The nuclide transport in the one-dimensional porous medium is considered as a first step in developing a decay chain transport in multidimensional inhomogeneous media. A method of solving conventional advection-dispersion equation with decay chain of arbitrary length by using the method of characteristics (MOC) is introduced. In specific cases where the advection are dominant rather than dispersion, the method is known to be useful : one of the most distinctive advantages in applying the model is that the MU minimizes the numerical dispersion, which is distinguished in such common numerical schemes as finite element method and finite difference method. The suggested model is considered to be effective through several illustrations for the case that decay chain of arbitrary length is involved during transport which is difficult to solve by standard numerical solutions if the medium becomes more complicated.

• Journal of Korea Water Resources Association
• /
• v.43 no.6
• /
• pp.543-557
• /
• 2010

The effects of the selection for sediment transport equations and advection-diffusion equations according to different sediment transport modes on the modeling results of bed changes were analyzed using the CCHE2D and compared with field data in this paper. The most suitable sediment transport equation and sediment transport mode for advection-diffusion equation were suggested for the upstream approached channel of the Nakdong River Estuary Barrage. The bed changes simulated by the Engelund and Hansen formula were very small in the modeling case for the low and high flow discharges compared with the case of the Ackers and White formula. Also, the numerical modeling with the actual hydraulic event in 2002 presents that the bed change result with the bed load transport type for advection-diffusion equation was close to the field measurement more than the suspended load type.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.165-169
• /
• 2009

The effect of the Dirichlet boundary condition for the redistance equation of level set method on the solutionof sloshing problem is investigated by adopting four Dirichlet boundary conditions. For the solution of the incompressible Navier-Stokes equations, P1P1 four-step fractional finite element method is employed and a least-square finite element method is used for the solutions of the two hyperbolic type equations of level set method; advection and redistance equation. ALE (Arbitrary Lagrangian Eulerian) method is used to deal with a moving computational domain. It has been shown that the free surface motion in a sloshing tank is strongly dependent on the type of the Dirichlet boundary condition and the results of broken dam and sloshing problems using various Dirichlet boundary conditions are discussed and compared with the existing experimental results.

• Journal of computational fluids engineering
• /
• v.13 no.3
• /
• pp.8-13
• /
• 2008

We present a numerical simulation technique and some preliminary results of the impact and spreading of a droplet containing particles on the solid substrate in 2D. We used the 2nd-order Adams-Bashforth / Crank-Nicholson method to solve the Navier-Stokes equation and employed the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension. The impact velocity has been generated by the instantaneous gravity. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles and the discontinuous Galerkin method has been used for the stabilization of the interface advection equation. We investigated the droplet spreading by the inertial force and discussed effects of the presence of particles on the spreading behavior using an example problem. We observed reduced oscillation and spread for the particulate droplet.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.6-9
• /
• 2011

In this study, the two-phase incompressible flow in two-dimensional channel considering the effect of surface tension is simulated using an improved level-set method. Quadratic element is used for solving the continuity and Navier-Stokes equations to avoid using an additional pressure equation, and Crank-Nicholson scheme and linear element are used for solving the advection equation of the level set function. Direct approach method using geometric information is implemented instead of the hyperbolic-type partial differential equation for the reinitializing the level set function. The benchmark test case considers various arrays of defomable droplets under different flow conditions in straight channel. The deformation and migration of the droplets are computed and the results are compared very well with the existing studies.