• Korean Journal of Environmental Agriculture
• /
• v.31 no.2
• /
• pp.192-199
• /
• 2012

BACKGROUND: Genetically modified (GM) crops must receive relevant regulator's authorization before they can be sold as seed or used food, feed and processing. Before approving any GM crop, the relevant government ministries are required to examine environmental risk assessment to make scientifically sound and socially acceptable decisions. But one of the least studied and understood areas in the environmental risk assessment of GM crops are their impact on soil microbial community. METHODS AND RESULTS: Recently, advanced methods have been developed to characterize the soil microbial community in various environments. In this study, the culture-dependent and culture-independent technical approaches for profiling soil microbial communities are summarized and their applicability to assess GM crops are discussed. CONCLUSION(S): We concluded that the effect of GM crops on soil microbial community need to be assessed on a case by case basis. The combination of culture-dependent and culture-independent method was necessary for reliable and detailed assessment of effect of GM crops on soil microbial community.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.173-178
• /
• 2008

Calcium lactate was prepared by reacting lactic acid with precipitated calcium carbonate (PCC) which was prepared by carbonation process (calcite) and solution process (aragonite). Effects of PCC morphology (calcite and aragonite) on calcium lactate by the solution process were investigated experimentally. Despite the slow forming rate at the initial stage, the final yield of calcium lactate appeared higher when calcite was used. Therefore, the maximum yield of calcium lactate using aragonite was 85.0% and that using calcite was 88.7%, respectively. For both cases, the optimum temperature for the preparation appeared at around $60^{\circ}C$. Furthermore, the increase in lactic acid concentration over 2.0 mol% increased slurry viscosity and deteriorated mass transfer, which resulted in low yield of calcium lactate for both cases. SEM analyses showed that the prepared calcium lactate appeared as plate-like crystal form, irrespective of PCC morphologies, reaction temperatures, and concentrations of lactic acid.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.151-156
• /
• 2009

Samhaeju is a traditional Korean noble rice wine, in which its processing is performed at low temperatures for an extended fermentation time and with three brewing steps. In this study, Samhaeju was prepared by different brewing methods that were modified from the method in the literature. Chemical composition of samples were determined to evaluate the quality of the Samhaeju. The Samhaeju was analyzed for pH, total acids, amino nitrogen, Hunter color values, free sugars, organic acids, and volatile components. Before the addition of the second and third mashing, pH values had decreased slightly and total acids had rapidly increased. Free sugar and amino nitrogen contents were high in final product. After addition of the third mashing as the advanced step, a dilution effect was shown. Glucose (A: 0.77-7.0%, B: 0.77-3.81%) was a major free sugar, and lactic acid (A: 0-2,840mg%, B: 0-3,375mg%) was a major organic acid during the entire period of fermentation. Based on principal component analysis of electronic nose data for the components, the stages of Samhaeju fermentation were primarily separated along the first principal component (PC, proportion : 98.67%). The first PC component (PC1) was moved from negative value(-6.16) to positive value(9.00) with increasing fermentation time. The change patterns for pH and total acid during the fermentation period were similar to those of PC1 from the data obtained by electronic nose based on mass spectrometry.

• Journal of Internet Computing and Services
• /
• v.15 no.4
• /
• pp.125-133
• /
• 2014

The column-oriented database storage is a very advanced model for large-volume data analysis systems because of its superior I/O performance. Traditional data storages exploit row-oriented storage where the attributes of a record are placed contiguously in hard disk for fast write operations. However, for search-mostly datawarehouse systems, column-oriented storage has become a more proper model because of its superior read performance. Recently, solid state drive using MLC flash memory is largely recognized as the preferred storage media for high-speed data analysis systems. The features of non-volatility, low power consumption, and fast access time for read operations are sufficient grounds to support flash memory as major storage components of modern database servers. However, we need to improve traditional transaction management scheme due to the relatively slow characteristics of column compression and flash operation as compared to RAM memory. In this research, we propose a new scheme called Column-aware Multi-Version Locking (CaMVL) scheme for efficient transaction processing. CaMVL improves transaction performance by using compression lock and multi version reads for efficiently handling slow flash write/erase operation in lock management process. We also propose a simulation model to show the performance of CaMVL. Based on the results of the performance evaluation, we conclude that CaMVL scheme outperforms the traditional scheme.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.4
• /
• pp.217-229
• /
• 2016

Goat milk production and processing is a dynamic and growing industry that is fundamental to the health of hundreds of millions of people worldwide and is recognized as an important contributor to many national economies. Goat milk has contributed significantly to the economic and nutritional quality of life in developing countries, particularly in the Mediterranean, the Middle East, Eastern Europe, and Latin America. Goat milk has played an important role in the health and nutrition of infants and the elderly, and is also known to be beneficial and therapeutic for people with milk allergies. The potential and value of the nutritional, health, and therapeutic effects of goat milk and specialized goat milk products are now attracting attention. Various products can be made from goat milk based on its chemical properties. In addition, special products such as hair, skin care, products, and cosmetics produced using goat milk have garnered more attention in recent years. Nevertheless, high quality products can only be made from good quality goat milk. Advanced technical treatments are necessary to produce high quality goat milk that meets consumer expectation of nutritional, hygienic, and good sensory products. Good taste has been a critical criterion when deciding to buy and consume goat milk and associated products. However, it may be possible to produce more value-added products that cater to the new trends in consumer needs and thus maintain economic sustainability of goat milk industry.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.1
• /
• pp.14-21
• /
• 2014

PURPOSE. The purpose of this study was to evaluate bone response to anodized titanium implants coated with the extract of black cohosh, Asarum Sieboldii, and pharbitis semen. MATERIALS AND METHODS. Forty anodized titanium implants were prepared as follows: group 1 was for control; group 2 were implants soaked in a solution containing triterpenoids extracted from black cohosh for 24 hours; group 3 were implants soaked in a solution containing extracts of black cohosh and Asarum Sieboldii for 24 hours; group 4 were implants soaked in a solution containing extracts of pharbitis semen for 24 hours. The implants from these groups were randomly and surgically implanted into the tibiae of ten rabbits. After 1, 2, and 4 weeks of healing, the nondecalcified ground sections were subjected to histological observation, and the percentage of bone-to-implant contact (BIC%) was calculated. RESULTS. All groups exhibited good bone healing with the bone tissue in direct contact with the surface of the implant. Group 2 ($52.44{\pm}10.98$, $25.54{\pm}5.56$) showed a significantly greater BIC% compared to that of group 3 ($45.34{\pm}5.00$, $22.24{\pm}2.20$) with respect to the four consecutive threads and total length, respectively. The BIC% of group 1 ($25.22{\pm}6.00$) was significantly greater than that of group 3 ($22.24{\pm}2.20$) only for total length. CONCLUSION. This study did not show any remarkable effects of the extract of black coshosh and the other natural products on osseointegration of anodized titanium implants as coating agents. Further studies about the application method of the natural products on to the surface of implants are required.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.35-40
• /
• 2012

In this study, 1-(2-methoxyethyl)-3-methylimidazolium methanesulfonate ionic liquid has been synthesized, characterized and tested with respect to carbon dioxide absorption with the aim to use it as advanced absorbent materials in fossil fuel processing. The ionic liquid was synthesized by a one step method, low cost. The thermal and chemical stability of selected ionic liquid has been investigated by DSC, TGA and the structure was verified by $^1H$-NMR spectroscopy. The solubility of carbon dioxide in the methanesulfonate-based ionic liquids were measured using a high-pressure equilibrium apparatus equipped with a variable-volume view cell at 30, 50 and $70^{\circ}C$ and pressure up to 195 bar. The results show that carbon dioxide solubilities of 1-(2-methoxyethyl)-3-methylimidazolium methanesulfonate increased with pressure increasing and temperature decreasing, and the carbon dioxide absorption capacity showed 27.6 $CO_2/IL$(g/kg) at $30^{\circ}C$, 13 bar.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.1-9
• /
• 2020

ABL (Airborne Bathymetric LiDAR) is an advanced survey technology that uses green lasers to simultaneously measure the water depths and oceanic topography in coastal and river areas. Seabed point cloud extraction is an essential prerequisite to further utilizing the ABL data for various geographic data processing and applications. Conventional seabed detection approaches often use return waveforms. However, their limited accessibility often limits the broad use of the bathymetric LiDAR (Light Detection And Ranging) data. Further, it is often questioned if the waveform-based seabed extraction is reliable enough to extract seabed. Therefore, there is a high demand to extract seabed from the point cloud using other sources of information, such as geometric information. This study aimed to assess the feasibility of a ground filtering method to seabed extraction from geo-referenced point cloud data by using CSF (Cloth Simulation Filtering) method. We conducted a preliminary experiment with the RIGEL VQ 880 bathymetric data, and the results show that the CSF algorithm can be effectively applied to the seabed point segmentation.

• Journal of Service Research and Studies
• /
• v.10 no.1
• /
• pp.85-96
• /
• 2020

In Asia, where the aging population is growing rapidly, as the funeral service industry develops and the market grows. The economic value and interest of funeral services is increasing. However, Korea's funeral services are being developed in a biased direction, focusing only on funeral services, after death. Compared to the case of advanced funeral services in the United States, the United Kingdom, and Japan, not only the funeral but also the care of the deceased's family and acquaintances around us are developing. It is appropriate to use a method based on ethnography and User eXperience. For this purpose, the method of collecting and analyzing the ethnography and user experience data of actual resident and visitor was deduced in persona method in the next ten years, and funeral service centered on resident and visitor. In this study, qualitative data centered on the future direction of funeral services, focusing on the resident (family) and the guest who are the principals of services from the perspective of service science. It is difficult to derive meaningful results from the process of collecting, processing, and interpreting big data in general, and in this case, the data analysis method is based on ethnography and user eXperience.) Is appropriate. For this purpose, the method of collecting and analyzing the ethnography and user experience data of the actual resident and the visitor was deduced in the persona method in detail after 10 years. In addition, the future direction of funeral services centered on residence and visitor was presented.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2016

Currently Korean government is rushing the new electronic government system introduced as 'platform e-government' with big data and cloud computing technologies and systems, ultimately intending to provide the public institution services customized from the integrated counter or window for the heterogeneous resident services. In this regard, this study suggested how to design the new metadata information system in which mutual integration of information systems can take place, where heterogeneous services can be shared efficiently at the application and data unit, as a separate application that can provide a single one- stop service for residents' petition at the integrated level in the back-office based on the public data in possession of each of government ministries and related organizations. If this proposed system is implemented, the achievement of customized public service can be advanced one step forward in processing the petitions of the residents by organically connected link between 'Demand Chain' and 'Supply Chain' in the integrated window. In other words, it could be made possible through the unification of both the 'Supply Chain' performed in the office space of the officials at the back-office level and the 'Demand Chain' performed in the living space of the residents at the front-office level.