• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.43-49
• /
• 2006

The surface and pore structure of cellulose fibers have a significant impact on the properties and performance in applications. Cellulase enzymatic hydrolysis of cellulose fibers can result in changes to the surface and pore structure thus providing a useful tool for fiber modification. This research characterizes these changes using various test methods such as fiber dimension, water retention value, hard-to-remove water content, freezing and non-freezing bound water content, polymer adsorption, and crystallinity index. For a high-dosage enzyme treatment (0.10 g/g), the fiber length was significantly decreased and the fibers were 'cut' in the cross direction, not in the axial direction. The swelling capacities as measured by the WRV and HR water content increased for the high-dosage treatment. Three independent measurements (non-freezing bound water, polymer adsorption, and crystallinity index) are in good agreement with the statement that the amorphous regions of cellulose fibers are a more readily available substrate relative to crystalline regions. Based on the experimental results obtained herein, a model was proposed to explain surface and pore structure modification of cellulose fibers via enzymatic treatment.

• 한국시뮬레이션학회논문지
• /
• 제15권4호
• /
• pp.59-67
• /
• 2006

본 연구에서는 갠트리타입 기종을 사용한 PCB 조립 생산시 생산시스템의 수행도 향상을 위한 방안을 개발하여 제시한다. 갠트리타입의 기종에서는 헤더나 슬롯의 이동보다는 노즐의 교체가 시스템의 수행도 향상에 주된 걸림돌이 되므로 동시흡착을 최대화할 수 있는 방안을 모색하였다. 본 연구에서 제시된 해법은 피더의 위치와 노즐의 위치를 감안하여 동시흡착을 수행하도록 함으로써 노즐 교체를 최소화하고, 기판당 조립시간의 감소도 이루어지도록 하였다. 제안 해법의 유효성을 입증하기 위해 시뮬레이션 모형을 구축하고 부품의 수를 변화시켜가면서 다음 작업대상피더와 교체노즐의 선정을 다양하게 하여 여러 운영방안들의 수행도와 비교 분석하였다. 시뮬레이션 결과, 동시흡착을 유도하는 노즐교체를 할 경우 전반적인 수행상태가 양호한 것으로 나타났다.

• Environmental Engineering Research
• /
• 제18권4호
• /
• pp.247-252
• /
• 2013

In this work, removal of phenol from aqueous solutions by activated red mud was investigated. Scanning electron microscopy and energy dispersive X-ray spectroscopy was used to observe the morphology and surface components of activated red mud, respectively. The effects of various parameters on the removal efficiency were studied, such as contact time, pH, initial phenol concentration, and adsorbent dosage. The removal percentage of phenol was initially increased, as the solution pH increased from 3 to 7, and then decreased above neutral pH. The removal percentage of phenol was decreased by increasing the initial phenol concentrations. Adsorption results show that equilibrium data follow the Freundlich isotherm, and kinetic data was well described by a pseudo-second-order kinetic model. Experimental results show that the activated red mud can be used to treat aqueous solutions containing phenol, as a low cost adsorbent with high efficiency.

• Advances in nano research
• /
• 제13권6호
• /
• pp.527-543
• /
• 2022

A novel, green, versatile and magnetically retrievable BiFeO₃/CDR (Bismuth ferrite/coriander) nanocomposites were fabricated via simple wet chemical method utilizing in situ functionalized, cheap coriander seed powder (CDR 5%, 10%, 15% and 20 wt%) as a fuel to enhance the efficiency of pristine BiFeO₃. A comparative study was performed between BiFeO₃/CDR and BiFeO₃/CNT (Bismuth ferrite/carbon nanotubes) nanocomposites for the removal of various hazardous pollutants from waste water. The successful synthesis of the fabricated nanomaterials was monitored via FT-IR, Powder XRD, FE-SEM, CV, VSM, CHNS/O and XPS studies. The synthesized nanomaterials were employed for the oxidative degradation of Carbol fuchsin, Reactive black 5, Ciprofloxacin and Doxorubicin; adsorption of a pesticide malathion; and reduction studies for Para-nitrophenol (PNP). The fabricated nanomaterials (BiFeO₃/CDR) showcased excellent efficiency and comparable results with (BiFeO₃/CNT) for the removal of model pollutants. Moreover, synthesized green heterojunction was also testified for mixture of textile and pharmaceutical waste. Hence CDR can be utilized as a better alternative of CNTs.

• Corrosion Science and Technology
• /
• 제21권1호
• /
• pp.9-20
• /
• 2022

The aim of this paper is to study corrosion inhibition of Aluminum with Capparis decidua extract. The study was performed in a 1.0 M solution of hydrochloric acid (HCl) and was monitored both by measuring mass loss and by using electrochemical and polarization methods. A scanning electron microscopy (SEM) technique was also applied for surface morphology analysis. The results revealed high inhibition efficiency of Capparis decidua extract. Our data also determined that efficiency is governed by temperature and concentration of extract. Optimum (88.2%) inhibitor efficiency was found with maximum extract concentration at 45 o C. The results also showed a slight diminution of aluminum dissolution when the temperature is low. Based on the Langmuir adsorption model, Capparis decidua adsorption on the aluminum surface shows a high regression coefficient value. From the results, the activation enthalpy (∆H#) and activation entropy (∆S#) were estimated and discussed. In conclusion, the study clearly shows that Capparis decidua extract acted against aluminum corrosion in acidic media by forming a protective film on top of the aluminum surface.

• 한국표면공학회지
• /
• 제56권6호
• /
• pp.427-436
• /
• 2023

In the industry, it is recognized that human activities significantly lead to a large amount of wastewater, mainly due to the increased use of water and energy. As a result, the growing field of wastewater resource technology is getting more attention. The common technology for hydrogen production, water electrolysis, requires purified water, leading to the need for desalination and reprocessing. However, producing hydrogen directly from wastewater could be a more cost-effective option compared to traditional methods. To achieve this, a series of first-principle computational simulations were conducted to assess how waste nutrient ions affect standard electrolysis catalysts. This study focused on understanding the adsorption mechanisms of byproducts related to the oxygen evolution reaction (OER) in anion exchange membrane (AEM) electrolysis, using Co₃O₄ as a typical non-precious metal catalyst. At the same time, efforts were made to develop a comprehensive free energy prediction model for more accurate predictions of OER results.

• 대한환경공학회지
• /
• 제30권2호
• /
• pp.190-198
• /
• 2008

본 연구에서는 주유소 등의 지하 유류저장탱크나 파이프의 제한된 수명으로 인해 발생할 수 있는 가솔린의 누출에 의해 MTBE로 토양이 오염되었을 경우를 가정하여, 칼럼실험을 수행하고, CXTFIT 기법을 이용하여 토양 내 MTBE의 이동특성을 살펴 보았다. 칼럼실험에서는 토성, 수분함량, 유기물함량, 주입유속을 달리하여, 주입액과 유출액의 MTBE의 농도 측정값을 비교하고, CXTFIT기법을 이용하여 two-site 비평형 흡착모델에 사용된 매개변수(D, R, $\beta$, $\omega$)를 구하였다. 이들 매개변수와 파과곡선을 이용하여 MTBE의 토양 내 이동특성을 살펴보았다. 토양 내 미세입자와 유기물함량이 많을수록 이류에 의한 영향이 감소하는 것으로 나타났으며, 수분함량과 유속의 증가는 이류에 의한 MTBE의 이동을 더욱 가속시키는 것으로 나타났다.

• 상하수도학회지
• /
• 제37권6호
• /
• pp.375-382
• /
• 2023

The binary oxide adsorbent using Fe and Mn (Fe-Mn) has been prepared by precipitation method to enhance the removal of phosphate. Different amounts of chitosan, a natural organic polymer, were used during preparation of Fe-Mn as a stabilizer to protect an aggregation of Fe-Mn particles. The optimal amount of chitosan has been determined considering the separation of the Fe-Mn particles by gravity from solution and highest removal efficiency of phosphate (Fe-Mn10). The application of Fe-Mn10 increased removal efficiency at least 15% compared to bare Fe-Mn. According to the Langmuir isotherm model, the maximum uptake (q_m) and affinity coefficient (b) were calculated to be 184 and 240 mg/g, and 4.28 and 7.30 L/mg for Fe-Mn and Fe-Mn10, respectively, indicating 30% and 70% increase. The effect of pH showed that the removal efficiency of phosphate was decrease with increase of pH regardless of type of adsorbent. The enhanced removal efficiency for Fe-Mn10 was maintained in entire range of pH. In the kinetics, both adsorbents obtained 70% removal efficiency within 5 min and 90% removal efficiency was achieved at 1 h. Pseudo second order (PSO) kinetic model showed higher correlation of determination (R²), suggesting chemisorption was the primary phosphate adsorption for both Fe-Mn and Fe-Mn10.

• 한국지반환경공학회 논문집
• /
• 제13권5호
• /
• pp.5-12
• /
• 2012

항생제는 환경에 지속적인 노출과 저항성으로 인해 우려물질로 간주되고 있다. 항생제의 제한적인 생분해능에 따른 하수처리장에서의 불완전한 제거와 광범위한 사용으로 인해 상대적으로 많은 양이 환경에 방류되고 있는 실정이다. 이에 본 연구에서는 다양한 촉매(Titanium dioxide; $TiO_2$, Hydroxyapatite; HAP)를 통해 항생제의 하나인 sulfamethoxazole의 동역학적 흡착과 광촉매반응에 대해 연구하였으며, 부가적으로 통계적 분석방법인 반응표면법(RSM)을 이용하여 UV/$TiO_2$/HAP 시스템에서의 운전인자의 영향을 살펴보았다. 동역학적 연구결과로 $TiO_2$/HAP의 흡착반응은 유사 2차 반응을 따르는 것으로 나타났으며, 입자내 확산 모델의 적용 결과, 반응속도 상수는 각각 $TiO_2$=$0.064min^{-1}$, HAP=$0.2866min^{-1}$와 $TiO_2$/HAP=$0.3708min^{-1}$으로 나타났다. RSM의 결과로는 ANOVA에서의 회귀항의 유의성이 나타났으며(P-value<0.05) 높은 결정계수 값($R^2$=96.2%, $R^2_{Adj}$=89.3%)이 나타나 이차 회귀모델의 예측이 만족스러운 것으로 관찰되었다. 그리고 Y(SMX 제거율, %)에 대해 예측된 최적 조건들은 코드화된 인자 기준으로 각각 $x_1$(SMX의 초기농도)=-0.7828, $x_2$(촉매의 양)=0.9974 그리고 $x_3$(반응시간)=0.5738로 나타났다. 입자내 확산 모델과 광촉매 산화 반응의 결과에 따르면 $TiO_2$/HAP 공정이 일반적인 고도산화공정에 비해 효율적인 것으로 관찰되었다.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.296-300
• /
• 2003

다성분 양이온 교환을 위한 평형과 동역학 데이터는 질량 작용 법칙과 표면 착화 모델을 이용하여 수행 및 평가하였다. 양이온 흡착의 평형과 칼럼 실험은 양이온 교환 합성 수지 IRN 77로 H/sup +/, Li/sup +/, Na/sup +/, NH₄/sup +/, Mg²/sup +/ 이용하여 2, 3, 4, 5 성분 양이온 교환을 수행하였다. 질량 작용 법칙과 표면 착화 모델은 이온 선택도와 경쟁적 양이온 교환을 조사하기 위하여 데이터에 대해 시험하였다. 표면 착화 모델은 질량 작용 모델보다 평형과 동역학 실험 데이터를 정확히 예측하였다.