• Structural Engineering and Mechanics
• /
• v.56 no.5
• /
• pp.871-897
• /
• 2015

This paper presents a novel method based on sensitivity of structural response for identifying both the system parameters and input excitation force of a bridge. This method, referred to as "Adjoint Variable Method", is a sensitivity-based finite element model updating method. The computational cost of sensitivity analyses is the main concern associated with damage detection by these methods. The main advantage of proposed method is inclusion of an analytical method to augment the accuracy and speed of the solution. The reliable performance of the method to precisely indentify the location and intensity of all types of predetermined single, multiple and random damages over the whole domain of moving vehicle speed is shown. A comparison study is also carried out to demonstrate the relative effectiveness and upgraded performance of the proposed method in comparison to the similar ordinary sensitivity analysis methods. Moreover, various sources of error including the effects of noise and primary errors on the numerical stability of the proposed method are discussed.

• Computational Structural Engineering
• /
• v.7 no.4
• /
• pp.85-101
• /
• 1994

A family of variational principles governing the dynamics of laminated plate has been derived using a variationally consistent shear deformable discrete laminated plate theory with particular reference to finite element procedures. The theoretical basis for the derivation is Sandhu's generalized procedure for the variational formulation of linear coupled boundary value problem. As the bilinear mapping to write the operator matrix of the field equations in self-adjoint form, convolution product was employed. Boundary conditions, initial conditions and probable internal discontinuity were explicitly included in the governing functionals. Some interesting extensions and specializations of the general variational principle were presented, which can provide many different finite element formulations for the problem.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.403-413
• /
• 2017

Dual-point aerodynamic design optimization is conducted for DLR-F6 wing-body-nacelle-pylon configuration adopting an efficient surface mesh movement method for complex junction geometries. A three-dimensional unstructured Euler solver and its discrete adjoint code are utilized for flow and sensitivity analysis, respectively. Considered design conditions are a low-lift condition and a cruise condition in a transonic regime. Design objective is to minimize drag and reduce shock strength at both flow conditions. Shape deformation is made by variation of the section shapes of inboard wing and pylon, nacelle vertical location and nacelle pitch angle. Hicks-Henne shape functions are employed for deformation of the section shapes of wing and pylon. By the design optimization, drag coefficients were remarkably reduced at both design conditions retaining specified lift coefficient and satisfying other constraints. Two-point design results show mixed features of the one-point design results at low-lift condition and cruise conditions.

• Journal of the Korean Mathematical Society
• /
• v.58 no.6
• /
• pp.1385-1405
• /
• 2021

Let A be a positive bounded linear operator acting on a complex Hilbert space (𝓗, ⟨·,·⟩). Let ω_A(T) and ║T║_A denote the A-numerical radius and the A-operator seminorm of an operator T acting on the semi-Hilbert space (𝓗, ⟨·,·⟩_A), respectively, where ⟨x, y⟩_A := ⟨Ax, y⟩ for all x, y ∈ 𝓗. In this paper, we show with different techniques from that used by Kittaneh in [24] that $$\frac{1}{4}{\parallel}T^{{\sharp}_A}T+TT^{{\sharp}_A}{\parallel}_A{\leq}{\omega}^2_A(T){\leq}\frac{1}{2}{\parallel}T^{{\sharp}_A}T+TT^{{\sharp}_A}{\parallel}_A.$$ Here T^#_A denotes a distinguished A-adjoint operator of T. Moreover, a considerable improvement of the above inequalities is proved. This allows us to compute the 𝔸-numerical radius of the operator matrix $\(\array{I&T\\0&-I}\)$ where 𝔸 = diag(A, A). In addition, several A-numerical radius inequalities for semi-Hilbert space operators are also established.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.13-30
• /
• 2019

This paper presents the recent improvements in the DeCART code for HTGR analysis. A new 190-group DeCART cross-section library based on ENDF/B-VII.0 was generated using the KAERI library processing system for HTGR. Two methods for the eigen-mode adjoint flux calculation were implemented. An azimuthal angle discretization method based on the Gaussian quadrature was implemented to reduce the error from the azimuthal angle discretization. A two-level parallelization using MPI and OpenMP was adopted for massive parallel computations. A quadratic depletion solver was implemented to reduce the error involved in the Gd depletion. A module to generate equivalent group constants was implemented for the nodal codes. The capabilities of the DeCART code were improved for geometry handling including an approximate treatment of a cylindrical outer boundary, an explicit border model, the R-G-B checker-board model, and a super-cell model for a hexagonal geometry. The newly improved and implemented functionalities were verified against various numerical benchmarks such as OECD/MHTGR-350 benchmark phase III problems, two-dimensional high temperature gas cooled reactor benchmark problems derived from the MHTGR-350 reference design, and numerical benchmark problems based on the compact nuclear power source experiment by comparing the DeCART solutions with the Monte-Carlo reference solutions obtained using the McCARD code.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4042-4049
• /
• 2024

A new automatic group structure optimization method based on the perturbation theory was proposed for the few-group structure in two-step nuclear design procedure for VHTR. It applies the sensitivity coefficient of the perturbation theory which includes not only the effect of the cross section on the multiplication factor but also the adjoint weighted reaction rate. The sensitivity coefficient of the fine group for the multiplication factor was calculated and the group boundary for a few-group can be determined so that the summation of the fine group sensitivity for a few-group should be evenly distributed over every few-group. This method was successfully implemented in the ABGO code. VHTR-350 and MiHTR 2D core were used to investigate the performance and applicability of the proposed method. The code generated the new group structures for two cores and the error of the multiplication and reaction rate by the new group structure was compared with the result by the fine group structure. The comparisons indicate that the new group structure by the proposed method can provide the multiplication factor and reaction rates comparable to the existing group structure and more accurate results than the group structure obtained using the Contributon theory.

• Atmosphere
• /
• v.23 no.2
• /
• pp.171-186
• /
• 2013

Recently, the number of observations used in a data assimilation system is increasing due to the enormous amount of observations, including satellite data. However, it is not clear that all of these observations are always beneficial to the performance of the numerical weather prediction (NWP). Therefore, it is important to evaluate the effect of observations on these forecasts so that the observations can be used more usefully in NWP process. In this study, the adjoint-based Forecast Sensitivity to Observation (FSO) method with the KMA Unified Model (UM) is applied to two high-impact weather events which occurred in summer and winter in Korea in an effort to investigate the effects of observations on the forecasts of these events. The total dry energy norm is used as a response function to calculate the adjoint sensitivity. For the summer case, TEMP observations have the greatest total impact while BOGUS shows the greatest impact per observation for all of the 24-, 36-, and 48-hour forecasts. For the winter case, aircraft, ATOVS, and ESA have the greatest total impact for the 24-, 36-, and 48-hour forecasts respectively, while ESA has the greatest impact per observation. Most of the observation effects are horizontally located upwind or in the vicinity of the Korean peninsula. The fraction of beneficial observations is less than 50%, which is less than the results in previous studies. As an additional experiment, the total moist energy norm is used as a response function to measure the sensitivity of 24-hour forecast error to observations. The characteristics of the observation impact with the moist energy response function are generally similar to those with the dry energy response function. However, the ATOVS observations were found to be sensitive to the response function, showing a positive (a negative) effect on the forecast when using the dry (moist) norm for the summer case. For the winter case, the dry and moist energy norm experiments show very similar results because the adjoint of KMA UM does not calculate the specific humidity of ice properly such that the dry and moist energy norms are very similar except for the humidity in air that is very low in winter.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.835-837
• /
• 2002

This paper presents a shape optimization algorithm of electromagnetic devices using the design sensitivity analysis with FEM. The design sensitivity and adjoint variable formulas are derived for the 3D FEM with edge element. This algorithm is applied to 3D electro-magnet pole shape optimization problem to make a uniform flux density at the target region.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.598-600
• /
• 2002

The magnet design is investigated by using the topology optimization and FEM. The design sensitivity equation for topology optimization is derived using the adjoint variable method and the continuum approach. The proposed method is applied to the topology optimization of C-core.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.726-728
• /
• 2002

The topology optimization of electromagnetic systems with two materials is investigated using the FEM. The design sensitivity equation for topology optimization is derived using the adjoint variable method and the continuum approach. The proposed method is applied to the topology optimization of C-core and compared to previous study with one material.