• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.122-130
• /
• 2012

Adhesive bend and shear tests of micro-sized bonded component have been performed to clarify the relationship between effects of heat-treatment on the adhesive strength and the bonded specimen shape using Weibull analysis. Multiple micro-sized SU-8 columns with four different diameters were fabricated on a Si substrate under the same fabrication condition. Heat-treatment can improve both of the adhesive bend and shear strength. The improvement rate of the adhesive shear strength is much larger than that of the adhesive bend strength, because the residual stress, which must change by heat-treatment, should effect more strongly on the shear loading. In case of bend type test, the adhesive bend strength in the smaller diameters (50 and $75\;{\mu}m$) widely vary, because the critical size of the natural defect (micro-crack) should vary more widely in the smaller diameters. In contrast, in case of shear type test, the adhesive shear strengths in each diameter of the columns little vary. This suggests that the size of the natural defects may not strongly influence on the adhesive shear strength. All the result suggests that both of the adhesive bend and shear strengths should be complicatedly affected by heat-treatment and the bonded columnar diameter.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.840-847
• /
• 2003

The bonding of adhesive joints of adhesive joints is influenced by the surface roughness of the joining Parts. However, the magnitude of the influence has not yet been clarified because of the complexity of the phenomena. In this study, it is shown that surface treatment affects adhesive strength and durability of alumina/polycarbonate single-lap .joints, and leading speed affects tensile-shea strength of adhesive Joints. To evaluate effect of surface treatments on the adhesive strength, several surface treatment methods are used, that is, cleaning, grinding, SiC polishing and sand blasting. It is shown that an optimum value of the surface roughness exists with respect to the tensile-shea strength of adhesive joints. The adhesive strength shows linear relationship with the surface roughness and loading speed. And the mechanical removal of disturbing films of lubricants, impurities and oxides make adhesive strength increase significantly.

• Journal of Acupuncture Research
• /
• v.26 no.1
• /
• pp.23-28
• /
• 2009

Objectives & Methods : The main point of this literatual study was to develop an external treatment on sprain using adhesive herbal pack. Results & Conclusions : The herbs which was used in adhesive treatment matched the same function with oral herb medicine such as, promoting blood flow to remove blood stasis, relieving rheumatic conditions, and removing obstruction in meridians and collaterals. Based on these function it was reviewed that adhesive herbal pack directly effected the sprain region from herbs by using alcohol, water to produce the pack. But even though it is known that the method of adhesive herbal treatment changes, most treatment still uses the traditional method. So researching on adhesive herbal treatment is required in the future.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.20-25
• /
• 1989

This study was carried out in order to investigate the treatment effect of PEG soln which is a common dimensional stabilizer to green log. sawing panel etc, on bonding product including plywood widely-used in secondary processing unit. The 30% concentration of aqueous PEG soln. with molecular weight of 400, 1.000 and 4,000 were prepared respectively, and also dipping the veneer in the PEG soln. spreading the PEG soln. on veneer and mixing the PEG soln. in the adhesive were allowed. Then the ratio of PEG impregnation on veneer, the adhesive strength of plywood were epitomized as follows: The ratio of impregnation by PEG 4,000 at dipping condition was highest. while that by PEG 400 at same condition was lowest. However, the effect of PEG molecular weight on the ratio of impregnation at spreading condition did not occur. 2. The adhesive strength was great in the order of 4,000>400>1,000 in molecular weight of PEG at dipping and spreading conditions. In case of mixing the PEG soln. in the adhesive, the adhesive strength was great in the order of 400>1,000>4,000 in molecular weight of PEG. Throughout three treatment conditions, PEG 400 was relatively favourable with about 10kg/$cm^2$ dry strength. 3. The adhesive strength was great 10 the order of spreading >dipping >mixing condition. 4. Although adhesive strength with the 30% concentration of aqueous PEG soln. was decreased by 35% and over, compared to control (non-treatment) adhesive strength, all types of PEG treatment except mixing the PEG soln. in the adhesive exceeded the standard dry strength for common use panel. 7.5kg/$cm^2$. 5. In warm water-proof test, the adhesive strengths by all PEG treatment conditions were less than the standard wet strength, 7.5kg cot, and also delamination of glue line occured mostly in mixing in the PEG soln. in the adhesive condition.

• The Journal of Korean Medicine
• /
• v.41 no.3
• /
• pp.151-161
• /
• 2020

Objectives: The purpose of this study is to report the improvement of multiple rib fracture after korean medical treatment; adhesive treatment and herb-medicine treatment. Methods: A patient with multiple rib fracture was treated with Daewhangchija-paste(大黃梔子膏) adhesive and herb-medicine treatment. Verbal numeric rating scale, medical examination by interview and rib series x-ray were used to assess progress of treatment. And we took pictures of left flank after attaching Daewhangchija-paste to observe the changes of the skin colors. Results: Rib series x-ray taken after 2 months of treatment revealed hard callus which added stability against external force on rib cage. After taking off Daewhangchija-paste, left plank skin turned into blue, green and yellow. And the pain level(VNRS) of left plank decreased from 10 to 0.5 for 4 months. Conclusions: Pain reduction on trauma site and improvement of general health condition were observed during combination treatment of Daewhangchija-paste adhesive and herb-medicine.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.332-335
• /
• 2002

Surface treatment was carried out by an Excimer Pulse laser beam in order to increase the adhesive strength of vulcanized rubber. With increasing number of laser beam irradiations, the adhesive strength was greatly increased; the adhesive strength was 1,500 N/m after irradiation 100 times. The energy density increase was in direct proportion to the adhesive strength increase; the maximum value of the adhesive strength was 1,500 N/m at the energy density of 176 mJ/$cm^{2}$. It was concluded that the increase of surface area was relevant to that of both energy density and adhesive strength

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.99-105
• /
• 2002

One of the important advantage of adhesive bonded joint can combine the different materials. The joint that bonded by structural adhesive bond must keep a large force and its strength is affected by some environmental factors such as temperature and submergence time in water. In order to advance the fatigue strength of adhesive bonded joint, mostly put a surface treatment on the surface. This study was researched the effect of air temperature, submergence time, submergence temperature and surface treatment on the fatigue strength. We found that submergence temperature has the most effect and low plasma treatment specimens have the most fatigue strength.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.231-234
• /
• 2016

Pouch film is manufactured by laminating aluminum foil, polyamide film and polypropylene film with an adhesive or extrusion resin. However, a surface treatment is required for the aluminum because bonding does not occur easily between the aluminum foil and the polymer film. Thus, for this study, surface treatment experiments were performed in order to confirm the effect on adhesion strength. First, a variety of surface treatment solutions were coated on aluminum foil, and contact angle and surface morphology analysis was carried out for the surface-treated aluminum. For lamination of the surface-treated aluminum foil with polyamide film, a polyurethane base adhesive was prepared for the adhesive strength test specimens. The adhesive strength between the aluminum foil and the polyamide film of the resulting specimens was measured (UTM). With such an experiment, it was possible to evaluate the effect on adhesive strength of the various surface treatments.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.14-21
• /
• 2004

In this research, we accomplished in order to improving color fastness of sublimation for Poly (vinyl alcohol) (PVA)-iodine polarized film. The poor iodine sublimation problem has greatly improved by $O_2$ low temperature plasma treatment. We obtained the followings: (1) plasma treatment has contributed in adhesive ability via peel strength, AFM image and roughness were investigated, But the improvement in adhesive strength was not linearly proportional to the treatment time. (2) $O_2$ plasma treated PVA-iodine polarized film was good enough as to maintain the transmittance and polarization even after iodine cone. of 0.05mol/L and dipping time of 50sec. (3) $O_2$ low temperature plasma treated PVA-iodine polarized film has obtain high durability because of good adhesive strength.

• Composites Research
• /
• v.23 no.6
• /
• pp.32-38
• /
• 2010

The effect of the atmospheric pressure plasma(APP) treatments is experimentally investigated to ascertain the optimum condition to yield the best adhesive properties between a polyamide woven fabric and acrylonitrile butadiene rubber(NBR). For the atmospheric pressure flame plasma(APFP) treatment, the optimum number of treatment at given conditions is 2 times. The thermal deformation of the fabric is more serious with increasing the number of APFP treatment. The adhesive strength of the case with APFP treated fabric is increased about 35% when compare to the case with non-APFP treated one for the interface(bonding agent one or two coatings). When the surface is coated twice with the bonding agent, the adhesive energy with APFP treated fabric is increased about 4 times. It was found that the surface modification of polyamide woven fabric by APFP treatment is a fast, economic and applicable method to improve the adhesive properties between woven fabric and rubber when compared to other APP treatments.