Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지

Evaluation of Environmental Fatigue Strength in Adhesive Bonding of Different Materials

이종재료 접착제 접합부의 환경 피로강도 평가

  • 임재규 (전북대학교 기계공학부, 자동차신기술연구소) ;
  • 이중삼 (전북대학교 대학원) ;
  • 윤호철 (전북대학교 대학원) ;
  • 유성철 (전북대학교 대학원)
  • Published : 2002.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

One of the important advantage of adhesive bonded joint can combine the different materials. The joint that bonded by structural adhesive bond must keep a large force and its strength is affected by some environmental factors such as temperature and submergence time in water. In order to advance the fatigue strength of adhesive bonded joint, mostly put a surface treatment on the surface. This study was researched the effect of air temperature, submergence time, submergence temperature and surface treatment on the fatigue strength. We found that submergence temperature has the most effect and low plasma treatment specimens have the most fatigue strength.

Keywords

References

  1. Polym. Eng. Sci. v.21 no.12 Brewis D.M(et al) https://doi.org/10.1002/pen.760211210
  2. J. Adhes. v.2 W.D. Bascom https://doi.org/10.1080/0021846708544591
  3. Adhesive joints The effect of moisture on the dimensional stability of adhesively bonded joints E.J. Hughes;J. Boutilier;J.L. Rugtherford;L. Mittal(ed)
  4. J. Adhes. v.19 The effect of moisture content in epoxy film adhesives on their performance. II. T-peel and 105℃lap shear strength H. Dodiuk;L. Dronri;J. Miller
  5. Int. J. Adhes. Adhes v.2 The effect of moisure and temperature on the properties of epoxide-polyamide adhesive in relation to it performance in single lap joints D. m. Brewis;J. Comyn;S.J. Shalash https://doi.org/10.1016/0143-7496(82)90028-8
  6. Autumn annual conference of KWS v.36 Effect of method of surface treatment and loading speed on bond strength for different materials Zhongsen Li;Jung Ha Kuk;Jae Kyoo Lim
  7. International Journal of Adhesion and Adhesives. v.22-2 Adhesives bonding of a titanium alloy to a glass fibre reinforced composite material P. Molitor;T. Young
  8. Autumn annual conference of KWS v.34 A Study on the evaluation of environmental adhesive-strength for adhesively bonded joints Jae-Kyoo Lim;Zhongsen Li;Hue Jea Lee