• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.113-116
• /
• 2006

Some nano hair systems in the nature are found to show excellent adhesive characteristic, which is called dry adhesive, and synthetic nano hairs to mimic these adhesiveness are believed to have many applications. To develop a practical synthetic dry adhesive system, we mold nano hairs on plastic substrates using thermoplstic materials including COC, PP, PC and PMMA. and estimate the moldability and the adhesive characteristic. As a template for molding nano hairs, AAO membrane is first adopted, which is 60um thick and 13mm in diameter. This membrane has about a billion of through-holes of which diameter is around 200nm. This AAO membrane and the pellet of materials are stacked in the mold and pressed to mold after heating up to be melted. The AAO membrane is removed using KOH to obtain the molded nano hairs. As a result, the diameter of the molded hairs is around 200nm and the length is $2um{\sim}60um$ depending on the molding conditions and materials. The molded nano hair substrates is estimated to show much better adhesive characteristic than a substrate without nano hairs.

• The Korean Journal of Zoology
• /
• v.38 no.2
• /
• pp.212-219
• /
• 1995

Through the histolosical observation of ovary in the nine species of the genus Cobitis, we found that specific adhesive membranes were attached to the outer zone radials during the vitellosenesis. These adhesive membranes could be classified into four forms as follows: 1) granular form of Colitis lutheri, C. striate, and C. sinensis, 2) villous form of C. longicorpus, C. konensis koreensis, C. k. pumilus, and C. granoei, 3) saw-like form of C. rotundicaudata, and 4) filamentous form of C. chou. The various forms of adhesive membrane of egg in the cobitid fishes are showed a species specificitv with reference to their habitats and spawning property.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.553-556
• /
• 2003

This study is analyzed about the factor of adhesive strength characteristics, curing time, asphalt application, test temperature which are liquid waterproofing membrane of rubber-asphalt and chloroprene-rubber type for concrete bridge deck. According to the results, curing time is shorter, adhesive strength is less in chloroprene-rubber type. And also chloroprene-rubber and rubber-asphalt type are showed high adhesive strength in low temperature.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.1
• /
• pp.51-53
• /
• 1993

Mucoadhesive tablets containing hydroxypropylcellulose-H (HPC) and carbopol 934 (CP) were prepared from direct compression. Their adhesive forces and water absorptions were investigated by using mouse peritoneal membrane and 1.5% agar plate, respectively. Adhesive force was significantly improved with increasing CP concentration, but was not affected by compression force and addition of disintegrants. And adhesive force to mouse peritioneal membrane was increased as fixing time increased. In conclusion, adequate adhesive force can be obtained by control of CP/HPC ratio and fixing time.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.373-378
• /
• 2002

The waterproofing system's performance is known to show a determining by complex interaction of material factors, design details, and the qualify of construction, and the waterproofing integrity of waterproofing membranes is determined by the bond to the deck and the amount of damage to the waterproofing membrane. In this research, the basic properties of waterproofing membranes on market and the tensile adhesive characteristics of waterproofing systems of concrete bridge deck have also been investigated in the view of the damages frequently reported from job site. As a results of tensile adhesive strength of waterproofing system, tensile strength is decrease with surface moisture contents except for inorganic-elastomeric liquid waterproofing membrane, and increase with strength of deck slab. Also tensile adhesive strength is generally increase in case of moisture curing of specimen because of pore structure and surface leveling. The after asphalt concrete paving tends to increase more than before those. The results of the liquid waterproofing membranes are upside-down, and the more concrete has strength, the more strength of tensile adhesive increase. The ambient temperature and the rolling temperature of asphalt concrete when application of the waterproofing membrane has considerable influence on the performance of waterproofing system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.794-797
• /
• 2004

In this study, tensile adhesive strength(TAS) test was carreid out for evaluated the effects of temperature conditions (-20, -10, 0, 5, 10, 20, 30, $40^{\circ}C$) on the tensile adhesive characteristics about 4 type waterproofing membranes which were commercially used in bridge decks. And, failure appeariences of waterproofing systems in each temperature after TAS test were observed the sawing surfaces of waterproofing systems for whether or not damaged of waterproofing membranes. Also, correction coefficient of TAS with temperature were calculated using 4 type waterproofing membrane. It could be shown that the higher TAS and shear adhesive strength, the lower temperature, regardless of the type of waterproofing membrane. Temperature sensibility of TAS was especially remarkable in epoxy membrane. Failure type was occurred the ductile failure in $30^{\circ}C\;and\;40^{\circ}C$. From these results, it was shown that if ambient temperature above $30^{\circ}C$ maintains for a long time, waterproofing membrane will be deformed by softening. Otherwise, waterproofing membrane in temperature below $20^{\circ}C$ shown that occurred the brittle failure. From the results of visual observation of cutting surface for specimen, the thin waterproofing membranes shown indented by hot aggregate of the asphalt mixtures. Therefore, it could be known that the specification of waterproofing membrane thickness is necessary by waterproofing membrane type. As temperature change varied with pavement depth, the interface temperature was more important than ambient temperature in TAS test. Now, TAS test results were limited only in $-10^{\circ}C\;and\;20^{\circ}C$ temperature, but correction coefficient of TAS by ambient temperature could be used as a solution to deal with this problem.

• International Journal of Highway Engineering
• /
• v.4 no.3 s.13
• /
• pp.15-23
• /
• 2002

The waterproofing system's performance is known to show a determing by complex interaction of material factors, design details, and the quality of construction, and the waterproofing integrity of waterproofing membranes is determined by the bond to the deck and the amount of damage to the waterproofing membrane. In this research, the basic properties of waterproofing membranes on market and the tensile adhesive chracteristics of waterproofing systems of concrete bridge deck have also been investigated in the view of the damages frequently reported from job site. For the tensile adhesive strength of sheet waterproofing membranes, the results after asphalt concrete paving tends to increase more than before those. The results of the liquid waterproofing membranes are upside-down, and the more concrete has strength, the more strength of tensile adhesive increase. The ambient temperature of asphalt concrete when application of the waterproofing membrane has considerable influence on the performance of waterproofing system. As described above, waterproofing system can be influenced by several factors. If they are not considered under construction, the overlooking will cause the damages of pavement and waterproofing system after traffic opening.

• The Korean Journal of Zoology
• /
• v.39 no.2
• /
• pp.198-206
• /
• 1996

Adhesive membranes in the oocvtes of four loach fishes of Korea were investigated by light and electron microscopes to clarify the structural characteristics among the species. In the vitellosenic stage the adhesive membranes of oocvtes could be classified into two forms as follows: 1) fence-shaped form of Nemacheilus yoni and 2) non-adhesive membranous form of Misgurnus anguillicoudotus, M. Mizolepis, and Lefuo costuto. The adhesive membranes of oocvtes in the loach fishes showed a species specificity with reference to their habitats and spawning properties.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.6
• /
• pp.526-529
• /
• 2004

Aim: To assess the efficacy of cyanoacrylate adhesive in the management of large perforations of the maxillary sinus membrane during sinus lifts. Material and methods: Eight rabbits were used in the study. Sinus membrane perforation(about 1.5cm) was repaired with cyanoacrylate adnesive on one side of the maxillary sinus and the opppsite side was used as a control. Histological evaluation was performed 4 weeks after the operation. Results: Histological studies showed normal healing of the sinus membrane across the site of previous perforation and no evidence of inflammation. Conclusion: Our results support the clinical use of cynoacrylate adhesive for repairing sinus membrane perforation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.61-65
• /
• 2006

Urethane, epoxy, acrylic have common property to adhere on the concrete dried surface in the waterproofing materials at present. In the wet condition, however, the materials such as urethane, epoxy, acrylic need a long hardening time and it become a reason of water leakage as the materials breaking down. it is one of the problem to adhere to the substrate. Therefore, in this thesis, I focused to assure the structural safety and durability and quality for waterproofing and safe of construction cost by cut down the cost of labor and reduce the term of works as searching the application of field condition for hish adhesive spray type of degenerated and rubberized asphalt membrane material.