• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.65-74
• /
• 2023

This study compared the surface roughness and microbial adhesion characteristics of Omnichroma, a novel composite resin developed using "smart chromatic technology", with those of two other conventional composite resins with different filler compositions. A total of 144 specimens were fabricated using 3 types of composite resins: Omnichroma (nano-spherical), Filtek Z350XT (nanofill), and Tetric N-Ceram (nanohybrid) and, divided into 3 groups of 48. Finishing was performed using tungsten carbide burs. Specimens were then divided into 3 subgroups using different polishing methods: Control, SofLex, and PoGo. Surface roughness was analyzed quantitatively and qualitatively using an atomic force microscope and a scanning electron microscope. Microbial adhesion was assessed by culturing Streptococcus mutans on the specimens for 24 hours and then measuring colony-forming units attached to the upper surface. The surface roughness (Ra) of Omnichroma was 0.123 ㎛ after finishing, and it exhibited a smooth surface compared to the other resins. However, after polishing, there were no significant differences in the surface roughness between the three composite groups, regardless of the polishing methods. The surfaces of the Control subgroups were significantly rougher than those of the SofLex subgroups in all 3 composite groups. However, except for Tetric N-Ceram, there were no significant differences between the Control and PoGo subgroups in the other composite groups. Microbial adhesion assessment showed no significant differences between any of the 3 composite resin subgroups; however, Omnichroma exhibited higher microbial adhesion than the other two composites. No significant correlation was observed between surface roughness and microbial adhesion.

• Journal of Chest Surgery
• /
• v.22 no.5
• /
• pp.724-730
• /
• 1989

The development of severe pericardial adhesion after cardiovascular surgical procedures often increases the risk of injuring the heart, great vessels, or extracardiac grafts during resternotomy. Several pericardial substitutes have been tested in an attempt to facilitate reoperation with inconclusive results. This study was designed to evaluate the applicability of two different materials as pericardial substitutes to minimize the pericardial adhesion and epicardial reaction. A procedure for induction of pericardial adhesion was carried out in 30 rabbits. Rabbits were divided into three groups of ten rabbits each: Group 1[control, simple pericardial closure]: Group 2[bovine pericardium as pericardial substitute]: Group 3[e-polytetrafluoroethylene surgical membrane, e-PTFE as a pericardial substitute]. Bovine pericardium or e-PTFE surgical membrane was interposed between the sternum and the heart. Rabbits were sacrificed at 4 weeks after operation. The development of adhesions and epicardial reactions were graded as: none [I]; minimal[II]; moderate[Ill]; and severe[1V]. Histologic studies of the substitute, the pericardium, and the epicardium were performed. The results were as follows; l. In group 1[control group], the degree of pericardial adhesions were grade I in none, grade II in 1, grade III in 3, and grade 1V in 6 animals. Epicardial reactions were grade I in none, grade II in 3, grade K in 4, grade 1V in 3 animals respectively. 2. In group 2[bovine pericardium], the degree of pericardial adhesions were grade I in 1, grade II in 5, grade III in 3, and grade 1V in 1 animal. Epicardial reactions were grade I in 1, grade II in 2, grade III in 4, and grade 1V in 3 animals respectively. 3. In group 3[e-PTFE], the degree of pericardial adhesions were grade I in 7 animals, grade II in 2, grade III in 1, and grade g in none. Epicardial reactions were grade I in 4, grade II in 3, grade III in 2, and grade IV in 1 animal respectively. Pericardial adhesions more than grade II were 90.9% in group 1, 40 % in group 2, and 10% in group 3. Pericardial adhesions were significantly reduced in group 3 compared to group 1 or 2. Epicardial reactions more than grade II were 70 % in group 1, 70 % in group 2 and 30 % in group 3. We concluded that this 0.1mm thick polytetrafluoroethylene surgical membrane is a suitable pericardial substitute to minimize the development of pericardial adhesion or epicardial reaction following cardiovascular surgery.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1410-1411
• /
• 2011

Tip-type carbon nanotube(CNT) based electron emitters were fabricated by forming a hafnium(Hf) interlayer between the CNT and the substrate. The CNTs were deposited by using the electrophoretic deposition method and thermally treated. No significant change in the microscopic structure of the CNTs, such as the ratio of length to diameter, was observed after the deposition of Hf interlayer and thermal treatment. As compared with the CNT emitter without the Hf-interlayer and thermal treatment, the CNT emitter with the Hf-interlayer and thermal treatment showed noticeably improved electron-emission properties due to the enhanced adhesion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.78-85
• /
• 2013

This paper presents the sliding mode control methods for anti-lock brake system (ABS) with the friction force observer. Using a simplified quarter car model, the sliding mode controller for ABS is designed to track the desired wheel slip ratio. Here, new method to find the desired wheel slip ratio which produces the maximum friction force between road and tire is suggested. The desired wheel slip ratio is varying according road and tire conditions to produce maximum friction force. In order to find optimum desired wheel slip ratio, the sliding mode observer for friction force is used. The proposed sliding mode controller with observer is evaluated in simulation, and the control design is shown to have high performance on roads with constant and varying adhesion coefficients.

• Journal of Periodontal and Implant Science
• /
• v.29 no.2
• /
• pp.333-350
• /
• 1999

The modulation of leukocyte cell surface adhesion molecules may influence the development of cellular events that determine the course of the inflammatory process. Direct interaction between activated T cells and monocytes resulted in a large production of $IL-1{\beta}$ by monocytes. In this reactions, adhesion molecules play an important part, yet the role of them in Tmonocytes interaction remain unclear. This study was undertaken in an effort to elucidate, 1) the influence of 1.25(OH)$_2D_3-induced$ differentiation on the monocyte responsiveness to direct contact with T lymphocytes, and 2) the role of adhesion molecules on the T-monocyte direct interaction. Initially, I observed that direct contact of monocyte cell line THP-1 with stimulated fixed T cell line HuT78 markedly induces IL-1${\beta}$ production by THP-1. $IL-1{\beta}$ production was higher when THP-1 had been previously exposed to 1.25(OH)$_2D_3$ as compared to control, with ${\alpha}$- 1.25(OH)$_2D_3$ dose-dependent and exposure time-dependent manner. It was shown that 1.25(OH)$_2D_3$ also increased the expression of ${\beta}_2$ integrin adhesion receptor Mac-1(CD11b/CD18) dose- and timedependently, but did not increase the expression of human leukocyte antigen- D(HLA-D) and intercellular adhesion molecule-1(ICAM-1). The $IL-1{\beta}$ producing activity of THP-1 cells correlated well with the ability to induce the Mac-1 expression on THP-1 surface. Monoclonal antibody raised against relevant cell surface glycoproteins on THP-1 were tested for their ability to block the response of THP-1 to T cells. Antibody to Mac-1 only partially blocked $IL-1{\beta}$ production by THP-1, whereas antibodies to ICAM-1 and HLA-D did not. These data indicate that regulation of Mac-1 expression on THP-1 cells can alter the responsiveness of these cells to contact by activated T cells, however other unknown structures on the THP-1 cells may be involved in this process also.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.138-145
• /
• 2015

PURPOSE. The objective of this study was to conduct an in vitro comparative evaluation of polished and laser-dimpled titanium (Ti) surfaces to determine whether either surface has an advantage in promoting the attachment of epithelial-like cells and fibroblast to Ti. MATERIALS AND METHODS. Forty-eight coin-shaped samples of commercially pure, grade 4 Ti plates were used in this study. These discs were cleaned to a surface roughness (Ra: roughness centerline average) of 180 nm by polishing and were divided into three groups: SM (n=16) had no dimples and served as the control, SM15 (n=16) had $5-{\mu}m$ dimples at $10-{\mu}m$ intervals, and SM30 (n=16) had $5-{\mu}m$ dimples at $25-{\mu}m$ intervals in a $2{\times}4mm^2$ area at the center of the disc. Human gingival squamous cell carcinoma cells (YD-38) and human lung fibroblasts (MRC-5) were cultured and used in cell proliferation assays, adhesion assays, immunofluorescent staining of adhesion proteins, and morphological analysis by SEM. The data were analyzed statistically to determine the significance of differences. RESULTS. The adhesion strength of epithelial cells was higher on Ti surfaces with $5-{\mu}m$ laser dimples than on polished Ti surfaces, while the adhesion of fibroblasts was not significantly changed by laser treatment of implant surfaces. However, epithelial cells and fibroblasts around the laser dimples appeared larger and showed increased expression of adhesion proteins. CONCLUSION. These findings demonstrate that laser dimpling may contribute to improving the peri-implant soft tissue barrier. This study provided helpful information for developing the transmucosal surface of the abutment.

• Journal of Adhesion and Interface
• /
• v.2 no.2
• /
• pp.1-10
• /
• 2001

Silica for Epoxy Molding Compound (EMC) was coated via plasma-polymerization with RF plasma (13.56 MHz) as a function of treatment time, power and pressure. 1,3-diaminopropane, allylamine, pyrrole, 1,2-epoxy-5-hexene, allylmercaptan or allylalcohol were utilized for plasma polymerization coating and adhesion of coated silica was evaluated by measuring flexural strength. CTE and water absorption of EMC were also measured, and fracture surface of flexural specimen was analyzed by SEM in order to elucidate the failure mode. The plasma polymer coated silica was analyzed by FT-IR and reactivity of plasma polymer coating with epoxy resin was evaluated with DSC in order to investigate the adhesion mechanism. The EMC prepared from the silica coated with 1,3-diaminopropane or allylamine exhibited high flexural strength, low CTE, and low water absorption compared with the control sample, and also exhibited 100% cohesive failure mode. These results can be attributed to the chemical reaction between the functional groups in the plasma polymer coating and epoxy resin, and also consistent with the results from FT-IR and DSC analysis.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.2
• /
• pp.282-289
• /
• 2008

We evaluated the effect of SHBCS on adhesion and invasion of colon L5-26 adenocarcinoma cell line in vitro in vitro and experimental liver metastasis in vivo. SHBCS showed little inhibitory effect on colon 26-L5 cell proliferation. At the concentration of up to 500 mg/ml of SHBCS 80% of cells were viable. SHBCS showed no inhibitory effect on adhesion and invasion of colon 26-L5 cells, which were placed on matrigel. In a dose dependent manner, oral administration of SHBCS showed a significantly inhibitory effect on liver metastasis from colon 26-L5 injected mice. When mice were depleted of NK cells or macrophages before tumor inoculation, SHBCS significantly decreased liver metastasis fromf the tumor injected mice. Compared with the control mice, SHBCS increased the populations of macrophages and NK cells by 30%, 18%(10 mg/mouse, 50 mg/mouse) and 5%, 1% (10 mg/mouse, 50 mg/mouse) respectively. Compared with the control mice, SHBCS increased the populations of CD4 cells by 5%, 18% (10 mg/mouse, 50 mg/mouse) respectively. Spelenocytes from mice administerd with SHBCS were stimulated with LPS plus ConA, proliferation of splenocytes from mice administerd with SHBCS was 140%, 146%(10 mg/mouse, 50 mg/mouse) compared with th control mice. In conclusion, the present study suggests that SHBCS may have an inhibitory effect on liver metastasis through immunopotentiating activity which is associated with macrophages and NK cells.

• Journal of Adhesion and Interface
• /
• v.9 no.4
• /
• pp.30-33
• /
• 2008

Two polymeric interfaces with single component homo-polymers were prepared to control the orientation of block copolymer thin-film nanostructures. Poly(4-acetoxy styrene) (OH-PAS) and poly(4-methoxy styrene) (OH-PMS) which have the average chemical composition of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) were precisely synthesized through nitroxide-mediated radical polymerization. After dehydration reactions between above polymers and SiOx layers of silicon wafers, the polymer-modified interface induced partial (30%) vertical orientation of PS-b-PMMA thin film in the case of OH-PMS and wholly parallel orientation in the case of OH-PAS. Chemical compositions of polymeric interface layers are regarded as the key parameter to control the orientation of nanostructures of block copolymer thin film.

• International Journal of Oral Biology
• /
• v.42 no.4
• /
• pp.203-211
• /
• 2017

The aim of this study was to evaluate the role of demineralized and particulate autogenous tooth, and interleukin-6 in bone regeneration. A demineralized and particulate autogenous tooth was prepared and human osteoblast-like cells (MG63) and human osteosarcoma cells were inoculated into the culture. The rate of cell adhesion, proliferation and mineralization were examined, and the appearance of cellular attachment was observed. An 8 mm critical size defect was created in the cranium of rabbits. Nine rabbits were divided into three groups including: An experimental group A (3 rabbits), in which a demineralised and particulate autogenous tooth was grafted; an experimental group B (3 rabbits), in which a demineralized, particulate autogenous tooth was grafted in addition to interleukin-6 (20 ng/mL); and a control group. The rabbits were sacrificed at 1, 2, 4 and 6 weeks for histopathological examination with H-E and Masson's Trichrome, and immunohistochemistry with osteocalcin. The cell-based assay showed a higher rate of cell adhesion, mineralization and cellular attachment in the experimental group A compared with the control group. The animal study revealed an increased number of osteoclasts, newly formed and mature bones in the experimental group A compared with the control group. Eventually, a higher number of osteoclasts were observed in the experimental group B. However, the emergence of newly formed and mature bone was lower than in the experimental group A. The current results suggest that treatment with demineralized and particulate autogenous tooth and interleukin-6 is not effective in stimulating bone regeneration during the bone grafting procedure.