• 콘크리트학회논문집
• /
• 제26권2호
• /
• pp.125-133
• /
• 2014

이 연구에서는 볼트접합 및 프리스트레스를 적용한 프리캐스트 콘크리트 보-기둥 외부접합부의 내진 및 구조적 성능을 평가하였다. 총 5개의 보-기둥 외부접합부 실험체를 제작하고 보 단부에 변위제어 방식으로 반복하중을 가하며 실험을 수행하였다. 이 연구의 결과를 근거로 다음과 같은 결론을 얻을 수 있었다. 완전 건식공법이 적용된 PC 접합부는 완전 습식공법이 적용된 RC 접합부보다 에너지소산이나 핀칭현상에 있어서 불리한 거동을 보였지만 이는 설계과정에서 의도된 현상이며, 횡변형 능력에 있어서는 우수한 결과를 보였다. 또한 층간변위비 4%까지 횡하중 저항성능의 손실이 발생하지 않았고 매설용너트에 항복이 집중되는 메커니즘을 보이는 점으로 미루어 볼 때 개발된 접합부는 외부접합부 횡저항시스템으로서 적합한 것으로 사료된다. 추가적인 프리스트레스는 PC 접합부의 과도한 핀칭현상 방지 및 접합부 균열제어에 효과적이었으며 PC 접합부의 전체적인 내진성능을 향상시켰다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.620-625
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired for car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. ill the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6N01 alloy welds. Aluminum alloy plate of 2.0mm in thickness with filler metal bar was welded by twin beam Nd:YAG laser facility (total power:5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 l/min was used. The defocusing distance is kept at 0 mm. At travel speeds of 3 to 9 m/min and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.

• 한국강구조학회 논문집
• /
• 제28권6호
• /
• pp.459-465
• /
• 2016

본 연구에서는 인장이음에 대한 반복하중의 영향을 파악하기 위하여 단순 인장이음을 대상으로 피로시험을 수행하였다. 인장이음의 볼트체결에 따른 축력과 작용하중에 의한 축력의 변화를 측정하였고 반복하중에 의한 볼트의 축력과 파괴양상, 이음의 피로강도를 조사하였다. 인장이음의 구조 상세 변수는 플랜지 두께와 고장력 볼트의 직경으로서 이들의 조합에 따라 볼트와 연결부의 강성이 달라지도록 하였다. 피로시험결과, 반복하중을 받는 인장이음의 파괴모드는 EC3에서 제시하고 있는 정적 파괴모드별 극한하중을 이용하여 평가될 수 있었다. 인장이음의 피로강도는 지레작용을 고려하지 않은 EC3(36)의 피로강도보다 상당히 안전측의 결과로 나타났다. 그러나, 지레작용에 의한 부가축력은 볼트 축력의 증가를 일으키기 때문에 피로강도에 대한 신중한 평가가 필요하다.

• International Journal of Korean Welding Society
• /
• 제2권2호
• /
• pp.26-31
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired fer car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. In the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6NO 1 alloy welds. Aluminum alloy plate of 2.Omm in thickness with filler metal bar was welded by twin beam Nd: YAG laser facility (total power: 5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 1/min was used. The defocusing distance is kept at 0 mm. At travel speeds off 3 to 9 and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.

• 대한통합의학회지
• /
• 제6권2호
• /
• pp.99-106
• /
• 2018

Purpose : Various studies effects of mental practice. However, there is a lack of research on the effects of practice on postural alignment. Therefore this study to the effect of ankle exercise combined with mental practice on postural alignment of legs. Method : Subjects were randomly assigned to mental practice group (experimental group n=15) and general exercise group (control group n=15). Postural alignment was the hip, knee, and ankle joints. When viewed from the side, an arbitrary point in front of the malleolus makes a straight line with the plumb line. Exercise was performed a week for weeks. Exercise programs included muscle strengthening, relaxation, and proprioception exercise. The experimental group mental practice. Result : Both groups showed significant differences in postural alignment ankle joint, knee joint, and hip joint. In particular, the experimental group showed a larger change than the control group. However, significant difference in postural alignment change only the knee joint (p<0.05), and there was no significant difference the hip joint (experimental group=$0.77{\pm}0.81$, control group=$0.87{\pm}1.13$) and ankle joint (experimental group=$0.52{\pm}0.63$, control group=$0.48{\pm}0.41$). Conclusion : This study suggests that mental practice is effective as an exercise method postural alignment. Mental practice also expected to be musculoskeletal disorders. Therefore, additional studies should be conducted to verify the effect of mental practice on the alignment of various parts.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.215-221
• /
• 2020

Objective: Tension-type headaches usually occur with temporomandibular disorder, which increases the risk of the chronic tension-type headaches. This study was conducted to investigate the effect of additional temporalmandibular therapy compared to cerivcal joint therapy for tension-type headaches with pericranial tenderness. Design: Randomized controlled trial. Methods: Forty-one patients with chronic tension-type headaches and pericranial tenderness were randomized into the 3 groups, such as the temporomandibular joint therapy group (TMJT group, n=14), cervical manual therapy group (CMT group, n=14) and conservative therapy group (CT group, n=13). All patients were assessed at baseline and after each intervention during the three sessions. The participants in the TMJT group received the temporomadibular joint treatment and cervical manual therapy for 30 minutes, once a week, for 3 weeks. The participants in the CMT group received the cervical manual therapy, and those in the CT group received modalities during same time period. The outcome measurements used were the intensity of headaches measured on the Visual Analogue Scale (VAS), quality of life measured with the Headache Impact Test (HIT-6), and function of the cervical spine using the Neck Diability Index (NDI). Results: The TMJT group that received temporomandibular joint treatment and cervical manual therapy showed a significant decrease in VAS, HIT-6, and NDI compared with the other 2 groups (p<0.05). Conclusions: This study suggected that temporomandibular joint treatment combined with cervical manual therapy was more effective for the chronic tension-type headaches with pericranial tenderness than the usual cervical therapy alone.

• 한국강구조학회 논문집
• /
• 제29권6호
• /
• pp.411-422
• /
• 2017

본 연구에서는 콘크리트피복 원형충전강관 기둥을 적용한 합성구조 접합부의 거동특성과 내진성능을 평가하기 위하여, 기둥-플랜지 접합부에 대한 인장실험과 보-기둥 접합부에 대한 반복하중 실험을 수행하였다. 기둥-플랜지 인장실험은 피복콘크리트의 유무와 플랜지 폭, 인장철근 보강을 변수로 하여 5개의 실험체에 대하여 하중재하능력과 파괴모드를 분석하였다. 실험결과, 접합부에서의 플랜지 단부 폭을 200mm에서 350mm로 증가시킬 경우 연결부의 강도 및 강성이 각각 1.61배와 1.56배가 증가했고, 인장철근을 보강할 경우 추가적으로 강성과 강도가 각각 1.35배와 1.92배 증가했다. 접합부 반복하중 실험에서는 접합 상세를 변수로 3개의 외부접합부 실험체를 구성했다. 접합부 보강상세로는 인장철근 보강과 강관의 두께, 수직강판 보강을 고려하였다. 모든 접합부 실험체는 보에서 뚜렷한 휨항복이 발생하였으며 접합부의 손상은 제한적이었다. 특히, 강재보가 강관에 직접 용접되는 경우 보의 웨브를 통해서도 하중이 전달되기 때문에, 플랜지 인장실험 결과보다 보수적인 설계가 가능하며, 접합부 강관 두께를 증가시키거나 수직강판으로 보강한 경우에는 추가적으로 패널존의 전단내력이 증가하는 것으로 나타났다.

• Clinics in Shoulder and Elbow
• /
• 제23권1호
• /
• pp.3-10
• /
• 2020

Background: The aim of this study was to evaluate clinical experience with arthroscopic debridement for septic arthritis of the shoulder joint and to report on our patient outcomes. Methods: The retrospective analysis included 36 shoulders (male:female, 15:21), contributed by 35 patients (mean age, 63.8 years) treated by arthroscopy for septic arthritis of the shoulder between November 2003 and February 2016. The mean follow-up period was 14.3 months (range, 12-33 months). An additional posterolateral portal and a 70° arthroscope was used to access the posteroinferior glenohumeral (GH) joint and posteroinferior subacromial (SA) space, respectively. Irrigation was performed with a large volume of fluid (25.1±8.1 L). Multiple suction drains (average, 3.3 drains) were inserted into the GH joint and SA space and removed 8.9±4.3 days after surgery. Intravenous antibiotics were administered for 3.9±1.8 weeks after surgery, followed by oral antibiotic treatment for another 3.6±1.9 weeks. Results: Among the 36 shoulders, reoperation was required in two cases (5.6%). The average range of motion achieved was 150.0° for forward flexion and T9 for internal rotation. The mean simple shoulder test score was 7.9±3.6 points. Nineteen shoulders (52.8%) had acupuncture or injection history prior to the infection. Pathogens were identified in 15 shoulders, with Staphylococcus aureus being the most commonly identified pathogen (10/15). Both the GH joint and the SA space were involved in 21 shoulders, while 14 cases involved only the GH joint and one case involved only the SA space. Conclusions: Complete debridement using an additional posterolateral portal and 70° arthroscope, a large volume of irrigation with >20 L of saline, and multiple suction drains may reduce the reoperation rate.

• 한국수자원학회논문집
• /
• 제49권12호
• /
• pp.1035-1044
• /
• 2016

제방과 보의 접속부에서는 복잡한 3차원이 흐름이 발생하여 붕괴가 자주 발생한다. 따라서 연결부에는 일반적인 호안에 비해 큰 안정성을 가진 연결호안의 설치가 필요하다. 그러나 연결호안에 대한 설계기준은 하천설계기준에 제시되어 있지 않기 때문에 연결호안의 공학적인 설계를 위한 연구가 필요하다. 본 연구에서는 연결호안에 사석을 포설하고 사석의 이탈조건을 파악하기위해 유량을 변화시켜가며 실험을 수행하였으며 실험수로는 폭 4 m, 길이 20 m의 직선수로이며 한쪽에만 제방이 설치되어 있다. 연결호안의 사석직경은 0.03 m 이며 유입유량은 $0.5{\sim}0.8m^3/s$이다. 동일한 조건에 대한 수치모의를 수행하여 연결부에 대한 흐름조건 및 제방 비탈면의 전단응력 등의 분포를 통해 영향범위를 파악하였다. 그 결과 연결호안의 경우 일반호안에 비해 사석직경이 4.1~6.9배 크게 산정되는 것으로 나타났으며 사석의 이탈속도가 같아도 유량이 클수록 취약지역의 범위가 하류방향으로 더 길게 발달하는 것으로 나타났다. 본 연구를 통해 연결호안 주변의 수리학적 특성에 따른 사석직경 및 영향범위를 산정하는 방법을 제안하였으며 추후 고수부지의 영향, 다양한 형식의 보와 호안에 대한 실험과 추가적인 검토가 수행된다면 연결호안의 안정성을 확보 할 수 있는 합리적인 설계방법을 제시할 수 있을 것이라고 기대된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.45-48
• /
• 2001

Unequal Error Protection(UP) is reasonable scheme in transmission of compressed video with low bit rate. Because it offers the error correction ability each other data according to the Source Significance Information. Hence it can also be flexible to the given channel environment on the video transmission. This paper propose the joint source channel coding through the UEP in consideration of the hierarchical structure of H.263+ based video and the influence of the transmission error. It especially proposes the error-resilient video transmission technique which can reduce complexity of channel coder & decoder by partitioning the video data with a frame. As the result of the proposed algorithm, it is possible to increase the quality of reconstructed video in the error environment without creating additional bits.