• Journal of Korean Medical classics
• /
• v.27 no.1
• /
• pp.99-109
• /
• 2014

Objectives : The concepts of many Korean medicine terms have changed for a long time and cumulatively been recorded in later medicine literatures. And, the same terms have very often been used for different meanings depending on context. Methods : This study was performed so that conceptual magnitude of Korean medicine terms could intuitively be recognized for the purpose of quantization. Results : This study was performed under the premise that terms used in old literatures of Korean medicine are related mostly to treatments that could immediately be reverted to types of medical herbs used. Through this, conceptual magnitude of terms was quantified by the method that frequency of medical herbs used for treatment was changed to numerical values. For this, data of "Compilation of Formulas and Medicinals Addendum" were used. First, after 'specificity' of each medicine herb corresponding to representative disease symptoms was calculated, medians in the set were selected, and 'values of conceptual magnitude' for representative disease symptoms were calculated. Conclusions : As a result, if disease symptoms are diverse, concept range is diachronically changed greatly, and specific disease symptoms of great conceptual difference are included, value of conceptual magnitude was great. Meanwhile, if disease factor and treatment are singular or limited to several types, and many medical herbs with high specificity are used, value of conceptual magnitude was less.

• The Korean Journal of Pain
• /
• v.34 no.3
• /
• pp.371-371
• /
• 2021

• Transactions of Materials Processing
• /
• v.3 no.1
• /
• pp.97-109
• /
• 1994

Closed-die forging of the spur gears with circular are fillet has been analyses by using the upper-bound method. A kinematically admissible velocity field has been developed, wherein, the tooth profile consists of the involute curve and the circular arc fillet. In the analysis, the deformation regions have been divided into eight zones. A constant frictional stress has been assumed on the contacting surfaces Utilizing the formulated velocity field, numerical calculations have been carried out to investigate the effects of various parameters, such as module, number of teeth, addendum modification coefficient and friction factor, on the relative forging pressure of spur gears. As the result of numerical calculations, the relative forging pressure does not change so much against the variation of module. On the other hand, the relative forging pressure increases at the final filling stage as the addendum modification coefficient increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.5
• /
• pp.650-662
• /
• 1993

The thesis describes the realization and test of the transport layer operating on the CLNS (Connection Less Network Service) which is specified by ISO 8073 and ADDENDUM 2 protocol. For realization of the transport layer, five modules and interface primitives were definde. This protocol was formally described by SDL (Specification and Description Language) and was programmed in C-language. For verification of the software, protocol tester was implemented and test scenarios were defined. The verification was accomplished based on the test scenarios. Transport Layer software presented in this thesis may be utilized in a real situation with some modifications. Protocol tester presented in this thesis can also be used for verification of other protocol softwares.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.118-124
• /
• 2016

In this paper, the model to develop the forming process for turbine seal is suggested. And numerical approach for the shape design of the turbine seal is examined. Because of the thin thickness of the turbine seal, the seal is easily fractured in the manufacturing process. The main factors of the seal manufacturing consist of addendum angle and dedendum angle, fillet on the addendum face, number of the gear teeth, sheet initial location and gear initial location, rake and vertical clearance. The structure and shape of seal are modeled using the commercial 3D mechanical design program, CATIA(V5/R20). Also, rolling process to manufacture the turbine seal is analyzed using DEFORM$^{TM}$-3D(V11), commercial forming analysis software and runs under PC workstation. This study focused on the shape design of turbine seal. Through this research, the main factors to make the turbine seal for airplane turbine engine can be obtained. This study results are reflected to the shape design for turbine seal.

• Korean Journal of Radiology
• /
• v.24 no.6
• /
• pp.529-540
• /
• 2023

Objective: To compare the diagnostic performance and clinical outcomes of 2-mSv computed tomography (CT) and conventional-dose CT (CDCT), following radiology residents' interpretation of CT examinations for suspected appendicitis. Materials and Methods: Altogether, 3074 patients with suspected appendicitis aged 15-44 years (28 ± 9 years, 1672 females) from 20 hospitals were randomly assigned to the 2-mSv CT (n = 1535) or CDCT (n = 1539) groups in a pragmatic trial from December 2013 and August 2016. Overall, 107 radiology residents participated in the trial as readers in the form of daily practice after online training for 2-mSv CT. They made preliminary CT reports, which were later finalized by attending radiologists via addendum reports, for 640 and 657 patients in the 2-mSv CT and CDCT groups, respectively. We compared the diagnostic performance of the residents, discrepancies between preliminary and addendum reports, and clinical outcomes between the two groups. Results: Patient characteristics were similar between the 640 and 657 patients. Residents' diagnostic performance was not significantly different between the 2-mSv CT and CDCT groups, with a sensitivity of 96.0% and 97.1%, respectively (difference [95% confidence interval {CI}], -1.1% [-4.9%, 2.6%]; P = 0.69) and specificity of 93.2% and 93.1%, respectively (0.1% [-3.6%, 3.7%]; P > 0.99). The 2-mSv CT and CDCT groups did not significantly differ in discrepancies between the preliminary and addendum reports regarding the presence of appendicitis (3.3% vs. 5.2%; -1.9% [-4.2%, 0.4%]; P = 0.12) and alternative diagnosis (5.5% vs. 6.4%; -0.9% [-3.6%, 1.8%]; P = 0.56). The rates of perforated appendicitis (12.0% vs. 12.6%; -0.6% [-4.3%, 3.1%]; P = 0.81) and negative appendectomies (1.9% vs. 1.1%; 0.8% [-0.7%, 2.3%]; P = 0.33) were not significantly different between the two groups. Conclusion: Diagnostic performance and clinical outcomes were not significantly different between the 2-mSv CT and CDCT groups following radiology residents' CT readings for suspected appendicitis.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.251-257
• /
• 2000

A numerical simulation of the temperature rise for sliding surface in dry contact is based on Jaeger's formula combined with a calculated heat input. A gear tooth temperature analysis was performed. The pressure distribution has the Hertzian pressure distribution on the heat source. The heat partition factor is calculated along line of action. A Temperature distribution of tooth surface is calculated about before and after profile modification. A Temperature of addendum and deddendum in modified gear have reduced.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.331-337
• /
• 2001

A numerical simulation of the temperature rise for sliding surface in dry contact is based on Jaegers formula combined with a calculated heat input. A gear tooth temperature analysis was performed. The pressure distribution has the Hertzian pressure distribution on the heat source. The heat partition factor is calculated along ling of action. A Temperature distribution of tooth surface is calculated about before and after profile modification. A Temperature of addendum and deddendum in modified gear have reduced.

• Tribology and Lubricants
• /
• v.5 no.2
• /
• pp.107-112
• /
• 1989

This paper deals with strength analysis of tooth and method of manufacture of external tooth profile in harmonic drive. From the calculation of load imposed on the contact teeth, moximum contact stress is investigated to design the addendum modification coefficient. New tooth profile of the external gear is generated according to the law of gearing, assuming that internal gear has involute tooth profile. External tooth profile can't be manufactured by conventional exclusive tools which have pressure angle of 20$\circ$. The method to design cutter tooth profile is presented.

• Publications of The Korean Astronomical Society
• /
• v.5 no.1
• /
• pp.85-94
• /
• 1990

Wangjo Silok, the official chronicle of Lee Dynasty, carries 131 records on the Kepler Supernova 1604; all of them are given in the present report. Among them 112 records are detailed descriptions about the observed brightness variation over the period from October 13, 1604 (the 37th year of King Sunjo) to April 23, 1605. On July 14, 1605, an addendum is given as a final assessment of the guest star incidence. Since the apparent brightness, size and position are carefully described as compared to bright planets and stars, these records are ideal for retrieving light curve of the Kepler Supernova over the seven month period. Simple procedures are suggested for the derivation of light curve.