• 제어로봇시스템학회논문지
• /
• 제19권5호
• /
• pp.435-441
• /
• 2013

A swarm robot system consists of with multiple mobile robots, each of which is called an agent. Each agent interacts with others and cooperates for a given task and a given environment. For the swarm robotic system, the loss of the entire work capability by malfunction or damage to a single robot is relatively small and replacement and repair of the robot is less costly. So, it is suitable to perform more complex tasks. The essential component for a swarm robotic system is an inter-robot collaboration strategy for teamwork. Recently, the swarm intelligence theory is applied to robotic system domain as a new framework of collective robotic system design. In this paper, FA (Firefly Algorithm) which is based on firefly's reaction to the lights of other fireflies and their social behavior is employed to optimize the group behavior of multiple robots. The main application of the firefly algorithm is performed on path planning of swarm mobile robots and its effectiveness is verified by simulations under various conditions.

• 자동차안전학회지
• /
• 제10권3호
• /
• pp.32-37
• /
• 2018

Recently, the driver can be assisted by the advanced active safety devices such as ADAS from road traffic risks. With this system, driver and passenger may freed from can driving tasks or kept eyes on forward direction while on the road. Help from adoptive cruise control, auto parking and newly develped automated driving vehicles technologies, the driver positions will vary significantly from the current standard driver position during the travel time. On this hypothesis, the objective of this study is analyze the behavior and injuries of drivers in the event of frontal impact under these abnormal driver position. Based on the KNCAP frontal impact testing method, this simulation matrix was set-up with dummies of 5 th tile female Hybrid III dummy and 50 th tile male Hybrid III dummy. The small sedan type passenger car was modeled in this simulation. The series of simulation was performed to compare the injuries and behaviour of each dummy, varying the seating status and seat position of each dummy.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2016년도 하계학술대회
• /
• pp.267-270
• /
• 2016

차량 인식 기술은 지능형 자율주행 차량 및 첨단 운전자 보조 시스템 (ADAS: Advanced Driver Assistance System)의 개발에 있어서 핵심 요소 기술이다. 영상 기반의 차량 검출 알고리즘은 일반적으로 가설 생성 (HG: Hypothesis Generation) 단계와 가설 검증 (HV: Hypothesis Verification) 단계로 구성된다. 가설 검증 단계는 관심 영역 (ROI: Region of Interest) 내에 차량이 존재할 가능성이 있는 후보 영역을 만드는 단계로서 전체 알고리즘의 복잡도와 성능에 영향을 미친다. 본 논문에서는 관심 영역 내에 존재하는 그림자와 차량으로 인한 에지를 검출하고 두 특징 정보를 결합한 가설 생성 방법을 제안하고 차량 후방 영상을 이용하여 사각지대를 감시하는 시스템에 제안 방법을 적용하는 실험을 수행하였다. 실험 결과로 제안 방법이 차량 후보 영역의 존재 여부와 위치 정보를 판단하기에 적합하며 이를 통해 차량 검출 알고리즘의 계산 복잡도를 개선하면서도 다음 단계인 가설 검증 시 검출 성능을 향상시킬 수 있음을 확인하였다.

• 한국융합학회논문지
• /
• 제9권1호
• /
• pp.253-259
• /
• 2018

최근 4차 산업혁명이 대두됨에 따라 다양한 산업의 변화되는 형태가 나타나고 있는데, 그중에서 인공지능, 빅데이터, 사물인터넷 등의 요소기술을 활용한 자율주행 자동차에 대한 관심이 높아지고 있다. 자율주행 자동차는 과거의 자동차 산업을 이끌던 차량 제조사와 부품사들의 영역에서 벗어나 전자 업체/통신 업체/IT 업체등 다양한 회사들의 관심이 증대되고 있다. 본 논문에서는 이러한 자율 주행 기술과, 현재 다양한 연구소/산업계의 현황 그리고 자율주행 자동차의 발전 추세에 대하여 정리하여 보고, 자율주행 자동차의 발전으로 인한 사회 변화에 대해서 간략하게 고찰해보도록 한다.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.7-13
• /
• 2017

As automotive industry develops, the demand for increasing traffic safety is growing. Lots of researches about vehicle convenience and safety technology have been implemented. Now, the autonomous driving test is being conducted all over the world, and the autonomous driving regulations are also being developed. Autonomous vehicles are being commercialized, but autonomous vehicle safety has not been guaranteed yet. This paper presents scenarios that assess the safety of autonomous vehicles by identifying the minimum requirements to ensure safety for a variety of situations on highway. In assessing driving safety, seven scenarios were totally selected. Seven scenarios were related to lane keeping and lane change performance in certain situations. These scenarios were verified by analyzing the driving data acquired through actual vehicle driving. Data analysis was implemented via computer simulation. These scenarios are developed based on existing ADAS evaluation and simulation of autonomous vehicle algorithm. Also Safety evaluation factors are developed based on ISO requirements, other papers and the current traffic regulations.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.43-51
• /
• 2020

Currently, the second level of the six stages of self-driving technology, as defined by SAE, is commercialized, and the third level is preparing for commercialization. The purpose of ACC is to be evaluated as a system useful for preventing and preventing accidents by minimizing driver fatigue through longitudinal speed control and relative distance control of the vehicle. In this regard, for the study of safety assessment methods in the practical environment of ACC. Distance measurement method using monocular camera and data acquisition equipment such as DGPS are utilized. Based on the evaluation scenario considering the domestic road environment proposed by the preceding study, the relative distance obtained from equipment such as DPGS and the relative distance using a monocular camera in the actual test is verified by comparing and analyzing the safety assessment. The comparison by scenario results showed a minimum error rate of 3.83% in Scenario 1 and a maximum of 14.61% in Scenario 6. The cause of the maximum error is that the lane recognition is not accurate in the camera image and irregular operation conditions such as rushing in or exiting the surrounding area from the walkway. It is expected that safety evaluation using a monocular camera will be possible for other ADAS systems in the future.

• 대한임베디드공학회논문지
• /
• 제11권5호
• /
• pp.277-285
• /
• 2016

Moving object detection system has been an emerging research field in various advanced driver assistance systems (ADAS) and surveillance system. In this paper, we propose two optical flow based moving object detection methods at dynamic scenes. Both proposed methods consist of three successive steps; pre-processing, foreground segmentation, and post-processing steps. Two proposed methods have the same pre-processing and post-processing steps, but different foreground segmentation step. Pre-processing calculates mainly optical flow map of which each pixel has the amplitude of motion vector. Dense optical flows are estimated by using Farneback technique, and the amplitude of the motion normalized into the range from 0 to 255 is assigned to each pixel of optical flow map. In the foreground segmentation step, moving object and background are classified by using the optical flow map. Here, we proposed two algorithms. One is Gaussian mixture model (GMM) based background subtraction, which is applied on optical map. Another is adaptive thresholding based foreground segmentation, which classifies each pixel into object and background by updating threshold value column by column. Through the simulations, we show that both optical flow based methods can achieve good enough object detection performances in dynamic scenes.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권5호
• /
• pp.310-318
• /
• 2016

Emerging technologies such as the Internet of Things (IoT) and the Advanced Driver Assistant System (ADAS) often have image transmission functions with tough constraints, like low power and/or low delay, which require that they adopt line-based, low memory compression methods instead of existing frame-based image compression standards. Bit rate control in the conventional frame-based compression systems requires a lot of hardware resources when the scope of handled data falls at the frame level. On the other hand, attempts to reduce the heavy hardware resource requirement by focusing on line-level processing yield uneven image quality through the frame. In this paper, we propose a bit rate control that maintains consistency in image quality through the frame and improves the legibility of text regions. To find the line characteristics, the proposed bit rate control tests each line for ease of compression and the existence of text. Experiments on the proposed bit rate control show peak signal-to-noise ratios (PSNRs) similar to those of conventional bit rate controls, but with the use of significantly fewer hardware resources.

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.581-585
• /
• 2014

본 논문은 ROI가 적용된 HOG 특징을 적용한 보행자 인식에 대해서 제안한다. 기존의 HOG 방법은 높은 인식률을 갖지만 처리 속도가 느린 단점이 존재한다. 처리 속도가 느린 기존의 HOG 방법에 ROI를 적용하여 불필요한 영역에 대한 연산을 줄여 처리 속도를 향상시켰다. ROI 영역을 설정하기 위해 영상 전체를 연산하는 홀수 프레임과 설정된 ROI 영역만을 연산하는 짝수 프레임을 조합한 구조를 사용하였다. 구현 결과 본 논문에서 제안하는 방법은 기존의 방법과 동일한 정확도를 유지하면서 처리 속도측면에서 약 20% 향상된 초당 8.3 프레임의 성능을 보였다.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.29-35
• /
• 2014

Lane Keeping Assistance System(LKAS) is a kind of Advanced Driver Assistance Systems(ADAS) which are developed to automate/ adapt/ enhance vehicle systems for safety and better driving. The main system function of LKAS is to support the driver in keeping the vehicle within the current lane. LKAS acquires information on the position of the vehicle within the lane and, when required, sends commands to actuators to influence the lateral movement of the vehicle. Recently, the vehicles equipped with LKAS are commercially available in a few vehicle-advanced countries and the installation of LKAS increases for safety enhancement. The test procedures for LKAS evaluations are being discussed and developed in international committees such as ISO(the International Organization for Standardization). In Korea, the evaluations of LKAS for vehicle safety are planned to be introduced in 2016 KNCAP(Korean New Car Assessment Program). Therefore, the test procedures of LKAS suitable for domestic road and traffic conditions, which accommodate international standards, should be developed. In this paper, some bullet points of the test procedures for LKAS are discussed by extensive researches of previous documents and reports, which are released in public in regard to lateral test procedures including LKAS and Lane Departure Warning System(LDWS). Later, it can be helpful to make a draft considering domestic traffic situations for test procedures of LKAS.