• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.240-248
• /
• 2013

In this paper, we propose a super-resolution algorithm using an adaptive weighted interpolation(AWI) and discrete wavelet transform(DWT). In general, super-resolution algorithms for single-image, probability based operations have been used for searching high-frequency components. Consequently, the complexity of the algorithm is increased and it causes the increase of processing time. In the proposed algorithm, we first find high-frequency sub-bands by using DWT. Then we apply an AWI to the obtained high-frequency sub-bands to make them have the same size as the input image. Now, the interpolated high-frequency sub-bands and input image are properly combined and perform the inverse DWT. For the experiments, we use the down-sampled version of the original image($512{\times}512$) as a test image($256{\times}256$). Through experiment, we confirm the improved efficiency of the proposed algorithm comparing with interpolation algorithms and also save the processing time comparing with the probability based algorithms even with the similar performance.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1980-1987
• /
• 1999

Restored image is always lower quality than original one due to distortion and noise. The purpose of image restoration is to improve the image quality by fixing the noise or distortion information. One category of spatial filters for image restoration is linear filter. This filter algorithm is easily implemented and can be suppressed the Gaussian noise effectively, but not so good performance for spot or impulse noise. In this paper, we propose the nonlinear spatial filter algorithm for image restoration called the optimal adaptive multistage filter(OAMF). The OAMF is used to reduce the filtering time, increases the noise suppression ratio and preserves the edge information. The OAMF optimizes the adaptive multistage filter(AMF) by using weight learning algorithm of back-propagation learning algorithm. Simulation results of this filter algorithm are presented and discussed.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.268-273
• /
• 1998

This study applies an on-line system, which employes an adaptive reconstruction technique to monitor and forecast ocean surface changes. The system adaptively generates an appropriate synthetic time series with recovering missing measurements for sequential images. The reconstruction method incorporates temporal variation according to physical properties of targets and anisotropic spatial optical properties into image processing techniques. This adaptive approach allows successive refinement of the structure of objects that are barely detectable in the observed series. The system sequentially collects the estimated results from the adaptive reconstruction and then statistically analyzes them to monitor and forecast the change in surface characteristics.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1228-1231
• /
• 2002

Digital image watermarking scheme using adaptive block division is proposed. To increase the perceptual invisibility, the image is divided into blocks by local properties and the human visual system (HVS), then the significant blocks are selected in the divided blocks. The significant coefficient is determined by Weber's law in these blocks. To increase the robustness, low frequency domains of the discrete cosine transform (DCT) and the discrete wavelet transform (DWT) are used. The watermark is embedded into the selected significant blocks of the DCT's and DWT's low frequency domains with adaptive watermark strengths. The watermark strength is determined by the variance and the local properties of the significant block. The experimental results prove that the proposed scheme has a good robustness against several image processing operations (e.g. median filtering, cropping, scaling, JPEG, JPEG2000, etc.) without significant degradation of the watermarked image.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.38-46
• /
• 2002

In this paper, we present an adaptive contrast controller for improving the Quality of motion-picture in the video signals on the display. Using a median of image signals, we can improve the contrast according to the middle brightness, adaptively. In addition, the proposed method is useful for real-time image processing and can be composed of simpler hardware structure than other conventional methods because it does not require field and frame memory for computed data. The proposed method can be applied for video signals as well as the still image, while existing methods are confined to only the static image Also, we designed the algorithm through the VHDL, and implemented it through the FPGA. From the testing results, we see that the proposed method can effectively improve the image contrast.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.179-185
• /
• 2019

This paper proposes a block-type classification based image binarization for the implementation of the low-power feature extraction algorithm. The proposed method can be implemented with threshold value re-use technique approach when the image divided into $64{\times}64$ macro blocks size and calculating the threshold value for each block type only once. The algorithm is validated based on quantitative results that only a threshold value change rate of up to 9% occurs within the same image/block type. Existing algorithms should compute the threshold value for 64 blocks when the macro block is divided by $64{\times}64$ on the basis of $512{\times}512$ images, but all suggestions can be made only once for best cases where the same block type is printed, and for the remaining 63 blocks, the adaptive threshold calculation can be reduced by only performing a block type classification process. The threshold calculation operation is performed five times when all block types occur, and only the block type separation process can be performed for the remaining 59 blocks, so 93% adaptive threshold calculation operation can be reduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.109-112
• /
• 2007

Definition-Enhancement of the digitalized image has been being made researches continuously due to application a camera to a mobile-apparatus and the advent of a digital camera. In particular, the inputted image from a sensor goes through the process of ISP(Image Signal Process) prior to output as a visual image. The high-frequency components are offset by LPF(Low Pass Filter) that eliminates the noise of high spatial-frequency at the moment. In this paper, we propose an algorithm that outputs more vivid image by using adaptive-HPF(High Pass Filter) that has apt coefficients for diverse conditions of an image edge, nevertheless we do not employ any Edge-Detection algorithm to enhance a blurred image.

• Advances in robotics research
• /
• v.2 no.2
• /
• pp.141-149
• /
• 2018

In image processing and robotic applications, two-dimensional (2D) black and white patterned planar markers are widely used. However, these markers are not detectable in low visibility environment and they are not changeable. This research proposes an active and adaptive marker node, which displays 2D marker patterns using light emitting diode (LED) arrays for easier recognition in the foggy or turbid underwater environments. Because each node is made to blink at a different frequency, active LED marker nodes were distinguishable from each other from a long distance without increasing the size of the marker. We expect that the proposed system can be used in various harsh conditions where the conventional marker systems are not applicable because of low visibility issues. The proposed system is still compatible with the conventional marker as the displayed patterns are identical.

• International Journal of Contents
• /
• v.11 no.3
• /
• pp.7-13
• /
• 2015

One of the biggest problems of skeletonization is the occurrence of distortions at the junction point of the final binary image. At the junction area, a single point usually becomes a small stroke, and the corresponding trajectory task, as well as the OCR, consequently becomes more complicated. We therefore propose an adaptive post-processing method that uses an adaptive threshold technique to correct the distortions. Our proposed method transforms the distorted segments into a single point so that they are as similar to the original image as possible, and this improves the static handwriting images after the skeletonization process. Further, we attained promising results regarding the usage of the enhanced skeletonized images in other applications, thereby proving the expediency and efficiency of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.12
• /
• pp.1031-1043
• /
• 1990

A sequential recursive Kalman filtering algorithm, using causal image model, which is designed to operate in real time in the scanning mode is developed to enhance quality of 64Kbps videocodec images via function of suppression of various noises and optimum restoration. In order to improve its performance, adapted an averaging of pixel values between processing lines and adaptive filtering strategy based on the local spatial variance. Effecttiveness of the Kalman filtering algorithm proposed has been proved in the processed test kalman filtering algorithm proposed has been proved in the processed test images and the NMSE, LOGMSE measured, therefore, it may proposes possibility of the usage in videocodec for pre- and post- processing.