• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1000-1005
• /
• 2003

The shock separation test simulates the environmental effects of the spacecraft separation from launch vehicle. The shock separation test for a structural model of KOMPSAT-Ⅱ(Korea Multi-Purpose SATellite Ⅱ) was performed in SITC(Satellite Integration ＆ Test Center) launch environmental test hall at KARI(Korea Aerospace Research Institute) to verify the shock test requirement of the spacecraft, to predict the induced acceleration responses on the primary structures and payloads by the explosion of pyre-lock and to perform mechanical fit check. The spacecraft with S/A was mated vertically to LV(Launch Vehicle) adapter simulator via a clamp band, then hoisted and suspended above a foam test bed by four isolation springs secured to the spacecraft hoist fittings to isolate the payload platform shock wave from the sling elements. For separation process, real pyre-devices were used and the time response signals from 60 accelerometers installed on the interested points was acquired and recorded. The SRS responses for each response channels were calculated and the achieved SRS's on the separation plane was reviewed and evaluated in comparison to the ICD(Interface Control Document) value.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.654-656
• /
• 2016

MACsec is a cryptographic function that operates on Layer 2. As industries such as IoT(Internet of Things) devices are receiving attention recently are connected to the network and Internet traffic is increasing rapidly. Because of today, Becoming the increase in traffic and complex situations to protect the overall traffic, not just certain parts. The MACsec technology has received attention. In this paper, Layer 2 security technology to MACsec. Design the technology MACsec adapter that can easily and readily added to existing Layer 2 network.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.2
• /
• pp.102-110
• /
• 2016

In this paper, a high-frequency dual mode control LLC resonant converter with wide input voltage range is proposed through zero voltage switching (ZVS) under the universal line input voltage and every load conditions. Conventional small power adapter driving should be satisfied with universal line input voltage because it has no power factor correction circuit regulation. The conventional LLC resonant converter for an adapter can reduce the size of transformer in terms of high-frequency driving and ZVS. However, this converter has a disadvantage in terms of design of resonant tank under various input voltages because the frequency modulation range is very wide to satisfy voltage conversion gain. Compared with the conventional one, the proposed LLC converter can be adapted to universal line input voltage and high-frequency driving because it is controlled by pulse width modulation and pulse frequency modulation with control voltage. The validity of the proposed LLC converter is proved through the 60 W prototype.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.3
• /
• pp.749-761
• /
• 2014

Tubing adapter is a key connection device in Gas-Tight Deep-Sea Water Sampler (GTWS). The sealing performance of the tubing adapter directly affects the GTWS's overall gas tightness. Tubing adapters with good sealing performance can ensure the transmission of seawater samples without gas leakage and can be repeatedly used. However, the sealing performance of tubing adapters made of different materials was not studied sufficiently. With the research discussed in this paper, the materials match schemes of the tubing adapters were proposed. With non-linear finite element contact analysis and sea trials in the South China Sea, it is expected that the recommended materials match schemes not only meet the requirements of tubing adapters' sealing performance but also provide the feasible options for the following research on tubing adapters in GTWS.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.382-395
• /
• 2011

In this paper, for adapter with power level below approximately 60W, a novel LLC resonant converter preceded by diode rectifier with a capacitor filter is presented. Due to the switching operation of the auxiliary switching device, the proposed LLC resonant converter can deliver power with the high efficiency characteristics from the universal line($110V_{AC}$/ $220V_{AC}$) and load conditions. The operating schemes on the proposed converter are analyzed and described. A 60W prototype product is built, tested and verified.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.2
• /
• pp.217-224
• /
• 2009

This study aims to show the guideline to select optimal anti-vibration gloves for specific power tools to prevent hazardous vibration to human body. It is most desirable for the correct evaluation of handtransmitted vibration form the power tool handle to measure the acceleration between the handle surface and the hand palm as recommended in ISO 5349-1. First, the accurate acceleration measurement device was developed of which the thickness and weight were less than 6 mm and 12 g respectively so that it can be placed between the handle and the palm without any inconvenience during the measurement. Finally, using the device we estimated anti-vibration glove performances considering the frequency characteristics of generated vibration by the power tool.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.637-644
• /
• 2019

Wireless power transfer (WPT) technology with various transfer mechanisms such as inductive coupling, magnetic resonance and capacitive coupling is being widely researched. Until now, power transfer efficiency (PTE) and power transfer capability (PTC) have been the primary concerns for designing and developing WPT systems. Therefore, a lot of studies have been documented to improve PTE and PTC. However, power consumption in the standby mode, also defined as the no-load mode, has been rarely studied. Recently, since the number of WPT products has been gradually increasing, it is necessary to develop techniques for reducing the standby power consumption of WPT systems. This paper investigates the standby power consumption of commercial WPT products. Moreover, a standby power reduction technique for WPT systems via magnetic resonance coupling (MRC) with a parallel resonance type resonator is proposed. To achieve a further standby power reduction, the voltage control of an AC/DC travel adapter is also adopted. The operational principles and characteristics are described and verified with simulation and experimental results. The proposed method greatly reduces the standby power consumption of a WPT system via MRC from 2.03 W to 0.19 W.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.578-578
• /
• 2016

In the past decade, many countries developed varies promising theories, methodologies and technologies for water resources management, such as Smart Water in Korea, eWater in Australia, Intelligent Water in Untied States, and Internet of Water in China. It is no exaggeration to say that Smart Water Management(SWM) will have a major role to play in addressing the global water challenges in the background of climate change, population growth and rapid urbanization. As a result, we can see major shifts taking place in the structure of the water industry, with a need for new approaches, skills, and water management policies. All these point towards a brighter future for the smart water sector and a new water paradigm, with applications and potential throughout the water cycle. However, each countries have their technology and industry standard system which may swift similar innovation and technology into different channels. In that sense, developing a common performance index and standard docking adapter for assessing Smart Water Management Initiatives(SWMI) is crucial for drawing a linkage of SWMI and SWMs to a way to implement advanced technology across Asia and Pacific. The performance index and standard docking adapter will facilitate quantitative and qualitative effects of utilized SWM techniques.

• Journal of Intelligence and Information Systems
• /
• v.28 no.3
• /
• pp.45-55
• /
• 2022

Recently, large-scale language models (LPLM) have been shown state-of-the-art performances in various tasks of natural language processing including intent classification. However, fine-tuning LPLM requires much computational cost for training and inference which is not appropriate for dialog system. In this paper, we propose compressed intent classification model for multi-agent in low-resource like CPU. Our method consists of two stages. First, we trained sentence encoder from LPLM then compressed it through knowledge distillation. Second, we trained agent-specific adapter for intent classification. The results of three intent classification datasets show that our method achieved 98% of the accuracy of LPLM with only 21% size of it.

• KIPE Magazine
• /
• v.27 no.3
• /
• pp.26-30
• /
• 2022

핸드폰, 노트북 빛 태블릿 PC와 같이 휴대할 수 있는 전자기기의 사용량이 높아질수록 대용량의 배터리를 필요로 하게 된다. 배터리 사양이 높아질수록 대용량의 배터리를 빠르게 충전시키는 어댑터 (Adapter)는 필수 요구 사항이 되었다. 고속 충전을 하기 위해선 높은 전류 공급 능력이 필요하며, 휴대성을 높이기 위해서 사이즈를 최소화하여 설계되어야 한다. 고효율 및 고밀도를 요구하는 시장에 걸맞게, 어댑터 시장 역시 Topology부터 사용 소자까지 많은 발전 중에 있다. 어댑터에 사용되는 대표적인 Topology는 절연에 용이하며 회로구조가 간단한 저비용, 고효율 Flyback Converter 회로가 기본적으로 사용된다. 하지만, 이 구조는 스위칭 주기마다 스위치 양단 전압 및 전류의 중첩에 의한 스위칭 손실이 불가피 하다는 단점이 존재한다. 그 단점을 보완하기 위해 RCD 스너버로 클램핑을 시켜줌과 동시에 변압기의 자화 인덕턴스와 스위치의 기생 커패시터의 공진 현상을 이용하여 스위치 양단 전압 V_DS가 최소화되는 지점에서 다음 스위칭 동작을 수행하는 QR(Quasi-Resonant) Flyback Converter를 사용한 어댑터가 시장에서 주로 보였다. 하지만 QR Flyback Converter 역시 기존 방식보다 유리하지만 이 또한 스위칭 주파수 증가에 따른 한계가 존재한다. 따라서 현재는 영전압 스위칭 (Zero Voltage Switching, ZVS)이 가능한 ACF(Active Clamp Flyback) Converter 회로의 연구 개발이 활발히 진행되고 있다. 이때 스위칭 특성이 우수한 GaN-FET를 적용한 어댑터가 시장에 출시되고 있다. 특히, 이 시장에서는 GaN 소자를 적용한 어댑터를 차세대 전력 반도체 적용이라는 마케팅에도 이용되는 것을 확인할 수 있다.