• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.4
• /
• pp.40-47
• /
• 2007

The objective of this study is to analyze the propriety of the Biotope Area Factor's(BAF) application and propose an improvement plan. The BAP system, initially started by Seoul metropolitan city, is being settled in Korea. The BAF originated from the Biotop $Fl{\ddot{a}}chen$ Faktor(BFF) system of Berlin Germany. It was established as part of the Landscape Plan for the ecological function recovery in the high density built-up area with a sense of environmentally friendly urban management. The study compared the BAF's present condition of Ganddong-Gu, Seoul with Seoul's BAF system. Some problems appeared from the system application. Firstly, it may cause ecological damage if the site ranges are more than current BAF system limits. Secondly, the application of the current BAF system has the possibility of general redevelopment, but the partial improvement considering current standards of the high density built-up area's paving section is impossible. Lastly, division of the application object and application type are not divided well. In addition, the Seoul BAF which is currently applied across the board is based on the destruction of the natural area and low density built-up area. Accordingly, to improve these problems requires a complementary system protecting the ecological function prior to the application of the BAF and with restricted application to high density of BAF system built-up area.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.3
• /
• pp.122-129
• /
• 2009

Strategic planning is an essential function of senior management in any business firm. Planning involves the firm's behavior in an competitive market and adaptation of the company's resources towards the selected market strategy. This study presents a methodological procedure for strategic planning in global top-tier construction firms. This procedure consists of the following stages. First, analyzed growth of revenue in which weight of total construction firms' revenue shown in Global Top 225 Contractors(ENR). Second, analyzed specialty of construction products. The products are General Building, Power, Water Supply, Industrial/Petroleum Process, and Transportation. Third, analyzed business the portfolio plan. The business portfolio plan includes both local/overseas market and specification/diversification of construction products. It affects the subsequent choice of a benchmarking for development of each construction company. The choice of the benchmarking firm, among several available alternatives, should follow a careful analysis of the characteristics and benefits inherent in the implementation of each.

• Korean Institute of Interior Design Journal
• /
• no.40
• /
• pp.3-9
• /
• 2003

Today the social concern about Interior Design gradually requires wide comprehension. Also according to demanders' requirement. Colleges cope with speed. Interior Design made by experts for the function and purpose in the conception of decoration. Therefore, Colleges are responsible to educate for more capable professional designers. But management is the first concern for Interior Design Company students are going to work at. Interior Design has not the important state yet in Korea, it is hard to manage the company with only design works on the table. As architectural design side must get some admission, design is apart from construction. but they are worked together in Interior Design. Also, as the architectural design with process detail drawings, interior design is required the detail design for construction. But it is the facts that the college is interested in and concentrated on rather education for design and space plan than intensive education for construction because of the restricted environment of practice room. I propose component and practical use of nude construction department to understand detailed design.

• Journal of Korean Society of Disaster and Security
• /
• v.5 no.1
• /
• pp.13-19
• /
• 2012

This paper introduces platform of platform (POP) for global network on climate adaptation change and disaster risk reduction (CCA/DRR). The POP consists of disaster prevention technology e-market platform, e-learning platform, information sharing platform, and monitoring platform for AMCDRR action plan. The POP is developing based on Korean e-Government standard framework and supports Web and mobile service. Additionally the POP uses special product and technology to search and classify data about CCA/DRR.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.273-278
• /
• 2007

In the next generation wireless mobile network, various methods are studied to offer interworking and mobility between various radio networks. To offer these harmoniously, network adaptation methods based on IP is generalized, and specifications of host-based mobility method with Mobile IPv4 and Mobile IPv6 to offer IP's mobility are defined in IETF specially. However, it is insufficient to satisfy quality of service that should be offered in wireless mobile network environment. Alternatively studies about Network-Based Mobility of Proxy Mobile IPv4, Proxy Mobile IPv6 etc. are preceded. This paper presents optimum plan that can offer mobility in the next generation radio transfer communication network by comparing and analyzing IP mobility methods divided by Host-based Mobility and Network-based Mobility.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.5
• /
• pp.267-275
• /
• 2012

In this paper, we present the model-based autonomic computing framework for a cyber-physical system which provides a self-management and a self-adaptation characteristics. A development process using this framework consists of two phases: a design phase in which a developer models faults, normal status constrains, and goals of the CPS, and an operational phase in which an autonomic computing engine operates monitor-analysis-plan-execute(MAPE) cycle for managed resources of the CPS. We design a hierachical architecture for autonomic computing engines and adopt the Model Reference Adaptive Control(MRAC) as a basic feedback loop model to separate goals and resource management. According to the GroundVehicle example, we demonstrate the effectiveness of the framework.

• Journal of Korean Association for Spatial Structures
• /
• v.3 no.3 s.9
• /
• pp.111-120
• /
• 2003

Tension members is a type of effective structural member, which is often used in large span structures. The structure systems composed with tension members are combined in various way and specific formations. So, there are need to research into the formations of tension structure and the type of adaptation in tension structure architectures. The structure systems with tension members were considered as tension main system, vector system and tension supported bending system, comprehensively. And tension structures were classified into the formation of tension structure with uniaxial or multiaxial line tension member, with surface member, with hybrid member of line and surface, concerning the flow of tension force. In each the formation of tension structure, the typical adaptations to architecture were also investigated through architecture examples. The type of the formation can be used to plan an architecture with respect to the flow of tension force and structural feature.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2399-2411
• /
• 1995

Crane operation for transporting heavy loads inherently causes swinging motion at the loads due to crane's acceleration or deceleration. This motion not only lowers the handling safety but also slows down the handling process. To complement such a problem, Korea Atomic Energy Research Institute(KAERI) has designed several anti-swing controllers using open loop and closed loop approaches. They are namely a pre-programmed feedback controller and a fuzzy controller. These controllers are implemented on a 1-ton crane system at KAERI and their control performances are compared. Test operations show that the new controllers are superior to that of conventional cranes in terms of robustness to the disturbances and adaptation capability to the change of rope length.

• Korean Institute of Interior Design Journal
• /
• no.37
• /
• pp.21-28
• /
• 2003

Transformation of complexity and diverse life style of contemporary men have call for increase in demand of single's and couple's living space of one-room apartment. Feasibility for intensive use of one-room apartment, regardless of it's openness and flexible character, multiple function in a single concentrated room without privacy and lack of confrontation of the changes in diverse living pattern enhance uniformity which reflects as an essential problem. Therefore, this study is to present a direction of one-room apartment interior space planning to differentiate from the existing system of uniformity and it's problems. Within the concept of flexibility, establishment of the flexibility factors for the application of hinged system with a movable furniture to compose a flexible space. In conclusion, the applications of hinged system concept of sliding, folding, over-hangings, are applied in existing one-room apartment plan to enhance flexible space planning which to drive in motivation and adaptation of the dweller's life cycle.

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.409-417
• /
• 2020

This case study is aimed at introducing a full-mouth rehabilitation of a patient with severe tooth wear using fixed prosthesis. This is a case report of a patient with severe wear dentition with changing vertical dimension. In line with using prosthetic treatment, patient adaptation was verified with provisional restorations followed by diagnostic wax-up. Function, esthetics, and occlusal stability were verified during a 4-week follow up period. Prosthodontic reconstruction based on systemic analysis, diagnosis, and treatment plan led to satisfactory results after delivery of definitive prosthesis. Prosthetic treatment of severe wear dentition was functionally and esthetically successful. Dentists and dental technicians would be able to develop better treatment approaches using fixed dental prosthesis.