• Journal of Energy Engineering
• /
• v.28 no.2
• /
• pp.18-35
• /
• 2019

The Korea District Heating Corporation operates a gas engine generator with a capacity of $4500m^3 /day$ of biogas generated from the sewage treatment plant of the Nanji Water Recycling Center and 1,500 kW. However, the actual operation experience of the biogas power plant is insufficient, and due to lack of accumulated technology and know-how, frequent breakdown and stoppage of the gas engine causes a lot of economic loss. Therefore, it is necessary to prepare technical fundamental measures for stable operation of the power plant In this study, a series of process problems of the gas engine plant using the biogas generated in the sewage treatment plant of the Nanji Water Recovery Center were identified and the optimization of the actual operation was made by minimizing the problems in each step. In order to purify the gas, which is the main cause of the failure stop, the conditions for establishing the quality standard of the adsorption capacity of the activated carbon were established through the analysis of the components and the adsorption test for the active carbon being used at present. In addition, the system was applied to actual operation by applying standards for replacement cycle of activated carbon to minimize impurities, strengthening measurement period of hydrogen sulfide, localization of activated carbon, and strengthening and improving the operation standards of the plant. As a result, the operating performance of gas engine # 1 was increased by 530% and the operation of the second engine was increased by 250%. In addition, improvement of vent line equipment has reduced work process and increased normal operation time and operation rate. In terms of economic efficiency, it also showed a sales increase of KRW 77,000 / year. By applying the strengthening and improvement measures of operating standards, it is possible to reduce the stoppage of the biogas plant, increase the utilization rate, It is judged to be an operational plan.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.54-58
• /
• 2007

In the continuous flow reductive treatment for recovery of silver from actual photographic wastewater, the effects of electrolysis time, applied potential, and the concentration of silver ion on the process have been examined. The efficiency of silver recovery for diluted photographic wastewater was increased with applied potential and reached its maximum at 6 V. However, the recovery of silver was shown to be decreased with potential above this. When the wastewater was undiluted, the efficiency of silver recovery was observed to rise as the applied potential became lower under the experimental conditions.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.3
• /
• pp.48-53
• /
• 2013

Due to the urbanization, lots of people are living in cities. It is very convenient to live in the cities for the people but at the same time, the highly populated city has several environmental problems. During delivery process of large amount of municipal waste generated from the cities, the automobile emission and traffic jam have been occurred. The waste collection in the cities has been mainly done by using labour force and delivery truck. This is the conventional waste collection up to now. Recently, new technologies like automated waste collection system and capsule transportation have been introduced. Conventional waste collection mainly relied on the labour force and truck delivery does not need to invest a lot of money for the start-up. However, it requires to pay the operational cost both for the labour force and the truck delivery. On the contrary to this conventional waste collection, the automated waste collection and capsule transportation require high initial investment cost. However, the automated waste collection and capsule transportation can reduce significantly the pollutants emission, traffic jam by the waste trucks and actual waste collection cost per ton. In dealing with the waste collection in the cities, new waste collection technologies could be properly combined with the conventional waste collection for the effective municipal waste treatment.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.743-751
• /
• 2010

It requires an interim performance assessment for BTL business of the sewerage rehabilitation which continues from 2005 till now. Means, It is necessary to make an interim performance assessment and an analysis of an business effect of the sewerage rehabilitation BTL projects which still continues, and we presented an improvement method of the new sewerage rehabilitation project in future. This paper has conducted an analysis of the business effect for 3 local government BTL projects which are completed and under operation as of now in Jincheon-Gun, Cheongju-Si and Gangjin-Gun. As a method of business effect analysis, we conducted a business effect of the 3 places using the index set which we previously set for the business effect analysis. The index set in this research was sectionalized to an improvement effect of operating wastewater treatment plant, an benefit effect of the direct cost, an benefit effect of the indirect cost and an environment friendly effect. We, in this paper, conducted an business effect analysis for 3 sewerage rehabilitation BTL projects which are completed or under operation recently as a demonstration, however we judge that an business effect analysis shall be conducted in a stage that a significant time for operation has passed since the completion of the construction in order to induce an actual business effect of the sewerage rehabilitation BTL project.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.43-53
• /
• 2008

This study is carried out for the fire safety of the factory building, the fire risk reduction measure in compliance with an example approached in fire risk reduction systematically, contribute to reduce the fire risk. The analytical fire risk process of discovering, identifying, estimating and evaluating risk and control measure as risk reduction measures are core concept, applies loss prevention with loss control techniques. The painting process in the workplace where the fire hazard and death accident accompanies coexists. Loss prevention problem of creation prevention of dangerous atmosphere at workplace is health and human services problem of normal circumstances, must be inspected with problem of combustible gases at the time of fire explosion. Static electricity measure accomplished the risk control process thoroughly as the fire risk reduction process model with the ignition sources measure which is presented. Fire risk from within organizing will be able to classify with each field by detailedly but risk treatment process will be able to apply basically all the same concept. Consequently about risk management example from before, this study is proposed risk management techniques that standardized rightly in the actual condition of organization with one plan, with discovery of fire risk, the feedback process in compliance with a fire risk reduction and the review which control the result is joint responsibility of engineer, technical expert and manager as part of safety management to practice with the fact must be supervised.

• The Journal of Pediatrics of Korean Medicine
• /
• v.27 no.3
• /
• pp.12-19
• /
• 2013

Objectives Children's unique taste bud often gives them difficult time to take oriental medicines. To overcome, survey was conducted focusing on useful and practical tips on how to take them. Methods The survey was carried out by posting mail questionnaire. Target clinics for the survey were selected by the internet search engine, Google, Daum, and Naver, and typing in "oriental treatment + pediatrics", "pediatrics + oriental medicine", "pediatric oriental clinic". 24 clinics were searched, but they were further narrowed down to the specialized pediatric oriental clinics. Also, total of 38 inquiry leaflets were distributed to 14 University Oriental Hospitals. Results If children refuse to take the medicine, mixture with sweeteners can be prescribed for them. Among them, oligosaccharide is the most recommended followed by sugar and honey. To avoid rejection to medication, use of different formulation, such as distillation medicine, soft X-Section, granulated medicine, and character printing can be used. Conclusions The most effective method is to investigate the mixture first, and then the alternative formulations.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.3
• /
• pp.311-318
• /
• 2001

The application of a pulsed power system is being extended to a environmental and industrial fields. The non-dissolution waste water pollutants from industrial plants can be processed by applying high voltage pulses with a fast rising time (a few nanoseconds) and short duration (nano to microseconds) in a pulsed corona discharge reactor. The nano-pulse generator with a magnetic switch has been developed. Its corona current in load can be adjusted by pulse width and repetition rate. we investigated the performance of the nano-pulse generator using the dummy load which is composed of resistor and capacitor equivalent to the actual reactor. This paper descibes the electrical characteristics of the nano-pulse generator that produces a 300 ns pulse at maximum repetition rate of 400 pps with a voltage of 40 kV across a $640{\Omega}$ load. In this paper we briefly discuss a configuration of system and test results.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.203-208
• /
• 2008

Recently, the modern society in development and industrial growth is investing a lot of time and much effort to improvement and environment of life quality. Thus, the casting tape which uses environmentally friendly and human body friendly water hardening process Polymer is rapidly substituted for the gypsum cast product which has been plentifully used in medical treatment. Until currently, prior researches have a tendency to focusing the analysis about chemical creation expense and reaction quality rather than the issue about optimization of the process for this polymerization. In the polymerization process which has been accomplished with actual same chemical creation expense, there has been a problem which is the possibility of getting a different result. This is because the optimization of respectively control factors is not accomplished which affect at polymerization process. Therefore, this research sees the chemical qualities of casting tape Polymer, consequently selects the polymerization process which is suitable. And, by using a experimental design, this research will evaluate the affects which the respective factors have on remaining NCO and viscosity. futhermore, this research will carry out the process optimization which can get the above results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.113-118
• /
• 2007

Now a performance process of Demolition works is 'Before-Removal & After-Classification' method in Korea. This method is short of demolition time, but construction wastes contained substances lower recycling rate of construction, raise expenses of reclamation & treatment. Then the government has decided upon a positive 'Before-Classification & After-Removal' method, and substantially raise a recycling rate of construction wastes. Therefore, this study makes an investigation into state of internal and external demolition field through evaluating technological level, we make a proposal of dismantling method from there. Also, we put dismantling to the test in an apartment by proposed work process. As the result, it made a term of works increased for removing interior material. To solve this problem, we need to develop tools and methods of construction that can remove efficiently. From now on, we continuously need to study a breakdown system of dismantling, analysis of dismantling process and general system by inspecting entire demolition process. And we have to study details for making a specific thesis of method of removing interior material which was based on developing a suitable partial demolition machine and dismantling works.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.2
• /
• pp.91-103
• /
• 2008

Because of comfortable texture and easy treatment, more and more knit products has been required for leisure such as sports, traveling, hobbies, and various social activities. Therefore, the demand of knit is gradually increasing in the clothing industry. There are, however, several issues, which require solutions, and we must develop higher value-added products, which differentiate from those of developing countries allowing us to compete and win in the world market. The patterns on porcelain of underglaze iron, which had been popular from late-l5th century to mid-16th century, are diverse, unique, and traditional--so valuable patterns of our own. The computer hitting machine enables the designer to conceive new designs and produce samples of fabrics within a few minutes, which allows us to save time for mass production. Therefore, it is an essential tool for the knitting industry. After collecting, analyzing, and choosing various patterns on porcelains of underglaze iron, This study reflects the actual experience of hitting the fabrics with the patterns through the computer knitting machine which is also used to produce patterns after designing the new patterns through Adobe Illustrator and Photoshop, which has several merits. This article compares and analyzes them for production, which uses the patterns that has been designed from the patterns on porcelains of underglaze iron.