• KIEAE Journal
• /
• 제17권3호
• /
• pp.75-81
• /
• 2017

Purpose: The energy consumption of apartment units is affected by the lifestyle of the residents rather than system technology. In this study the numerical analysis of assumed energy consumption correlation factors with arbitrary value due to uncertainty. It is intended to be used as a simulation correction value which can be utilized as a predicted value of actual energy usage. The correction value of the simulation is set in the developed form of the existing process that derives the actual usage amount. The simulation results used in the existing evaluation system are used to maintain the useful value as the current system evaluation scale and predict the actual capacity. Method: The method of the study is to statistically analyze the data frames of all complexes capable of collecting the annual energy usage and to reconstruct the population by adding the variables that are expected to be correlated. Repeat the data frame configuration with variables that are assumed to be highly correlated with energy use levels. Determine whether there is correlation or not. The intensity of the external characteristics of the building equipment related to the energy consumption is presented as the quantitative value. Result: The correlation between electricity consumption and trading price since 2010 is analyzed as (Correlation coefficient 0.82). These results are higher than (Correlation coefficient 0.79), which is the correlation between residential area and trading price. This paper signifies the starting point of the methodology that broadens the field of view of verification of simulation feasibility limited to the prediction technique focused on the simulation tool and the element technology scope.The diversified phenomenon reproduction method develops the existing energy simulation method.It can be completed with a simulation methodology that can infer actual energy consumption.

• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.168-174
• /
• 2016

A conductive oxide-based sapphire glass indium tin oxide/metal electrode and the optical coating, through patterning process was studied in excellent optical properties and integrated touch panel has a high strength. Indium tin oxide conductive oxides of the sapphire glass to 0.3 A at DC magnetron sputtering method of 10 min, gas flow Ar 10 Sccm Ar, $O_2$ 1.0 Sccm the formation conditions of the thin film after annealing at $550^{\circ}C$ for 30min was achieved through a 86% transmittance. In addition, the coating 130 nm hollow silica sol-gel was to improve the optical transmittance of the indium tin oxide to 91%. For the measurement by the modeling hollow silica sol by Macleod simulation and calculated the average values of silica part to the presence or absence in analogy to actual. Refractive index value and the actual value of the material on the simulation the transmittance difference is it does not completely match the air region similar to the actual value (transmission) could be confirmed that the measurement is set to a value of between 5 nm and 10 nm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.163-165
• /
• 2008

In this paper we compare performance of exponential effective SINR mapping (EESM) with traditional actual value interface (AVI) approach for various modulation and coding schemes (MCS) in terms of coded bit error rate (BER) or block error rate (BLER) using different transmission schemes. This paper provides explanation and comparison of the two algorithms for single input single output (SISO), and single input multi-output (SIMO, 1X2) in OFDM systems. We calibrate the value of beta ($\beta$) in EESM using large number of channel realizations, here $\beta$ is a calibration constant. This paper also presents importance of beta value in EESM and how it improves the performance of OFDM wireless systems. We propose different modulation and coding schemes. Here we consider Standford university interim (SUI) channel models. Furthermore this paper also shows the detail observation of the two algorithms. Finally the conclusion review given for short summary.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.318-323
• /
• 2008

First aim of this study is to investigate consumer's actual value for environment related performance of house by using three different method, Ranking, Analytical Hierarchy Process (AHP) and Conjoint Analysis method. Second aim is to estimate consumers' monetary value about environment related factor through Marginal Willing to Pay(MWTP), and third aim is to find out the difference of values between the groups classified according to respondents' characteristics. A questionnaire survey was carried out in Seoul in order to clarify the preference and monetary value of four selected attributes. They are environmental performance, residents' health, home automation and increase of floor area. As a result, people showed high values in the order of health, environmental consideration, increase of floor area and home automation. Moreover, it was found out that MWTP for environmental performance and health are higher than market price. In addition, the group of high age and group of female showed high values for the reduction of $CO_2$ emission

• 한국식품영양과학회지
• /
• 제19권5호
• /
• pp.418-428
• /
• 1990

This study measured each daily intake and excretion of iron copper and cobalt of eight 20-26 years old college men during four weeks by means of analyzing their food intake urine and feces keeping their normal living pattern and maintenance body weight. This study also compared the actual measurement value of iron intake by atomic absorption spectrophoto-meter with the conversion value of it by food table. The results were as follows. Each person's average intake daily was iron 9.19±0.32mg/day, copper 0.56±0.06mg/day and cobalt 1.86±0.18mg/day. Each person's average urinary excretion daily was iron 0.53±0.07mg/day, copper 0.07±0.03mg/day and cobalt 0.13±0.01mg/day. Each person's average fecal excretion daily was iron 1.73±0.14mg/day copper 0.16±0.01mg/day and cobalt 0.46±0.08mg/day. The actual measurement value was 9.19±0.32mg/day and its conversion value 14.07±0.29mg/day : the former was 35% lower than the latter.

• 대한방사선치료학회지
• /
• 제27권1호
• /
• pp.73-78
• /
• 2015

목 적 : 본 연구는 위상 기반 방식으로 배열 된 사차원 전산화 단층 촬영 영상(4DCT, 4-dimensional computed tomography)를 이용하여 진폭 기반 방식으로의 재구성 하였을 때의 위상 차이를 분석하였다. 대상 및 방법 : 2015년 02월부터 03월 까지 호흡동조 방사선 치료를 받은 간암 환자 10명의 사차원 전산화 단층 촬영 영상을 대상으로 분석 하였다. RPM respiratory gating (RPM 1.7.5, Varian, USA)장치를 이용하여 위상 기반 배열 방식의 호흡주기별 영상을 획득 하였으며, 획득된 호흡 주기별 영상은 치료계획시스템(Pinnacle 9.2, Philips, USA)을 이용하여 호흡주기별 복부의 움직임 값을 측정하였다. 최대 호기(50%)와 최대 흡기(0%)에서의 복부 움직임을 진폭으로 하여 10개 위상의 진폭 기반 호흡위상을 재구성하고, 이를 위상 기반 사차원영상촬영영상의 호흡 위상과 비교하였다. 결 과 : 위상 기반 및 진폭 기반 사차원단층촬영영상으로 재구성한 영상에서의 위상 차이는 최대 30% 호흡위상에서 확인할 수 있었으며, 30% 호흡 위상에서 평균 0.13 cm (최대 0.24 cm)의 위치 차이를 확인할 수 있었고, 동일 측정 점 위치가 가지는 위상차는 30% 위상에서 평균 8.7%(최대 16.5%)의 위상차를 확인하였다. 전체 호흡 구간에서 평균 위치 차이는 0.4 cm, 평균 위상 차이는 13.0% 임을 확인하였다. 결 론 : 본 연구 결과는 위상 기반 방식으로 배열된 4DCT 영상을 진폭 기반 방식으로의 변환하였을 때 계산 값과 실측값을 분석한 결과 최대 16.5% 의 위상차가 발생함을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.670-672
• /
• 2003

The purpose of this study is to estimate monthly evapotranspiration (ET) using normalized difference vegetation index (NDVI) obtained from NOAA/AVHRR data sets. Actual evapotranspiration was evaluated by the complementary relationship (Morton, 1978, Brutsaert and Stricker, 1979), and monthly NDVI was obtained by maximum value composite method from daily NDVI images in the Korean peninsula for the year 2001. The monthly actual ETs for each land cover were compared with the monthly NDVIs to determine relationships between actual ET and NDVI for each land cover category. There was a high correlation between monthly NDVI and monthly averaged actual ET. This study presents an alternative approach for land surface evapotranspiration based on remote sensing techniques.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.475-490
• /
• 2019

The detection of structural damage without a priori information on the healthy state is challenging. In order to address the issue, the study presents a baseline-free approach to detect damage in beam structures based on an actual influence line. In particular, a multi-segment function-fitting calculation is developed to extract the actual deflection influence line (DIL) of a damaged beam from bridge responses due to a passing vehicle. An intact basis function based on the measurement position is introduced. The damage index is defined as the difference between the actual DIL and a constructed function related to the intact basis, and the damage location is indicated based on the local peak value of the damage index curve. The damage basis function is formulated by using the detected damage location. Based on the intact and damage basis functions, damage severity is quantified by fitting the actual DIL using the least-square calculation. Both numerical and experimental examples are provided to investigate the feasibility of the proposed method. The results indicate that the present baseline-free approach is effective in detecting the damage of beam structures.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.231-235
• /
• 2009

According to flow of energy, the loss occurs through walls, roofs, windows and so on. Among these case, most of the loss that is about 45% occurs through windows. windows's U-value is six times higher than wall's one according to Building code, so the loss through windows accounts for very much rates. Currently, Exterior wall's U-value about building envelope is 0.35~0.58W/ mK, but windows's one is 3.3W/ mK. It means that the loss through windows occupy very much amounts relatively. Therefore, the solution is required to reduce energy loss and increasing displeasure caused by excessive influx of solar energy through windows, to solve the problems Like decoloration on indoor furniture an clothes by harmful ultraviolet rays, air conditioning and increased cost. Therefore, on this paper, Thermal Performance was evaluated through actual test about high insulation Super Window which can improve thermal performance and the Simulation result was compared with actual resul by using Simulation program WINDOW and THERM.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.997-1010
• /
• 2017

The black box model is a relatively new option for nonlinear dynamic system identification. It can be used for prediction problems just based on analyzing the input and output data without considering the changes of the internal structure. In this paper, a black box model was presented to solve unconstrained overlying strata movement problems in coal mine production. Based on the black box theory, the overlying strata regional system was viewed as a "black box", and the black box model on overburden strata movement was established. Then, the rock mechanical properties and the mining thickness and mined-out section area were selected as the subject and object respectively, and the influences of coal mining on the overburden regional system were discussed. Finally, a corrected method for height prediction of the fractured zone was obtained. According to actual mine geological conditions, the measured geological data were introduced into the black box model of overlying strata movement for height calculation, and the fractured zone height was determined as 40.36 m, which was comparable to the actual height value (43.91 m) of the fractured zone detected by Double-block Leak Hunting in Drill. By comparing the calculation result and actual surface subsidence value, it can be concluded that the proposed model is adaptable for height prediction of the fractured zone.