• 한국컴퓨터정보학회논문지
• /
• 제21권3호
• /
• pp.91-96
• /
• 2016

We have surrounded undesired living noises in our life. One of biggest noises coming out of range hood during cooking in the kitchen. A range hood is one of the most important appliances in the kitchen because it ventilates polluted air out during cooking, and maintains air quality in the kitchen. But current kitchen range hoods bring up some issues; First, the range hoods consume massive amount of standby power not in use condition. Second, current models have designed manual fan operating system with sudden onset of noise with starting. In this paper, we propose an auto control system entire processes from air ventilation to noise reduction. Our system is consist of three parts (Eco-sensors pack, Main Controller and Active Noise Controller); Eco-sensors pack detects air pollution of kitchen areas and sends the detection values to Main Controller. Main Controller determines operation of range hood by detected values. Active Noise Controller is located inside of the range hood. It received starting signals from Main Controller which elicits degrees of polluted air condition and fan operating speed from 1 to 3. Once Active Noise Controller detected the signals, it runs a ventilating fan until new value from Main Controller becomes 0. while the range hood works, A noise cancellation algorithm inside of Active Noise Controller become activated to reduce levels of noise. As a result, the proposed system clearly shows reduction in power consumption include standby power and decreases in levels of noise.

• Advances in concrete construction
• /
• 제9권2호
• /
• pp.161-171
• /
• 2020

In this paper, an experimental study was conducted on the compressive behavior of steel tube confined concrete (STCC) and concrete-filled steel tube (CFST) columns with active and passive confinement. To create active confinement in the STCC and CFST specimens, an innovative method was used in this study, in which by applying pressure on the fresh concrete, the steel tube was laterally pretensioned and the concrete core was compressed simultaneously. Of the benefits of this technique are improving the composite column behavior, without the use of additives and without the need for vibration, and achieving high prestressing levels. To achieve lower and higher prestressing levels, short and long term pressures were applied to the specimens, respectively. Nineteen STCC and CFST specimens in three groups of passive, short-term active, and long-term active confinement were subjected to axial compression, and their mechanical properties including the compressive strength, modulus of elasticity and axial strain were evaluated. The results showed that the proposed method of prestressing the STCC columns led to a significant increase in the compressive strength (about 60%), initial modulus of elasticity (about 130%) as well as a significant reduction in the axial strain (about 45%). In the CFST columns, the prestressing led to a considerable increase in the compressive strength, a small effect on the initial and secant modulus of elasticity and an increase in the axial strain (about 55%). Moreover, increased prestressing levels negligibly affected the compressive strength of STCCs and CFSTs but slightly increased the elastic modulus of STCCs and significantly decreased that of CFSTs.

• 한국소음진동공학회논문집
• /
• 제12권5호
• /
• pp.374-379
• /
• 2002

A new active muffler system has been developed and its superior performance on both noise reduction and engine torque increase is demonstrated with experiment. Main characteristic of the proposed muffler system is the use of destructive interference by transmission path difference of divided exhaust pipes to reduce major exhaust noise components thereby overcoming problems of other active exhaust noise control methods. The exhaust pipe is divided into two sections and joined again downstream. One divided pipe has a sliding mechanism to vary its length, which is controlled to make half wavelength transmission path difference for the major engine rpm frequency. In this system one divided pipe is used to control major rpm frequency and its Harmonics and another pipe is used to control noise component double the frequency of rpm. An after-market tuning muffler, which has very simple internal structure and minimal back pressure, is also installed to remove remaining wideband noise. To make the system to be small enough to be practical, conventional muffler is also installed and used in low rpm range and active muffler is only employed in high rpm range. Noise reduction of the proposed system is comparable to conventional passive muffler. The engine dynamo test has proved the proposed system can recover almost all the torque lost by conventional muffler.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.495-498
• /
• 2002

Recently, the advent of electro-active papers (EAPap) actuators has been reported. In this paper, the possibility of the actuators is demonstrated. EAPap is a paper that produces large displacement with small force under an electrical excitation. EAPap is made with a chemically treated paper by constructing thin electrodes on both sides of the paper. When electrical voltage is applied on the electrodes the EAPap produces bending displacement. To improve the bending performance of EAPap, different paper fibers-softwood, hardwood, bacteria cellulose, cellophane, carbon mixture paper, electrolyte containing paper and Korean traditional paper, in conjunction with additive chemicals were tested. Two attempts were made to construct the electrodes: the direct use of aluminum foil and the gold sputtering technique. It was found that a cellophane paper exhibits a remarkable bending performance. When 2MV/m of excitation voltage was applied on the paper actuator, more than 3mm of tip displacement was observed out of the 30 mm long paper beam. This is quite low excitation voltage compared to that of other EAPs. The actuation principle of electro-active paper (EAPap) and possible applications are addressed.

• 한국의류산업학회지
• /
• 제22권1호
• /
• pp.25-37
• /
• 2020

This study investigates the clothing purchase behavior of active seniors in their 50s and 60s. Differences of clothing purchase behaviors were examined according to gender and the group classified by shopping orientation. Data were collected from September 2 to September 9, 2019 using a professional internet research panel; subsequently, 246 sets of useful data were analyzed by descriptive statistics, factor analysis, reliability analysis, t-test, chi-squared test, ANOVA and Duncan-test using SPSS 21.0. The results of this study were as follows. First, there were significant differences in clothing purchase behavior of purchase frequency, purchase item, purchase price, and purchase channel according to gender; therefore marketers need plan different merchandising and retailing strategies between man's wear and woman's wear. Second. the result of cluster analysis by shopping orientation showed that active seniors were categorized into four groups including 'active shopping pursuit', 'economic/pleasure pursuit', 'convenience/brand pursuit', and 'passive shopping pursuit'. Third, there were significant differences in demographic variables such as gender and occupation according to four categorized groups. In addition, the significant differences of clothing purchase behaviors were verified according to four groups. 'Active shopping pursuit' group was shown to make the best use of offline channels and online channels in information research and product purchase.

• Smart Structures and Systems
• /
• 제7권5호
• /
• pp.365-378
• /
• 2011

Piezo-based active structural health monitoring (SHM) requires amplifiers specifically designed for capacitive loads. Moreover, with the increase in number of applications of wireless SHM systems, energy efficiency and cost reduction for this type of amplifiers is becoming a requirement. General lab grade amplifiers are big and costly, and not built for outdoor environments. Although some piezoceramic power amplifiers are available in the market, none of them are specifically targeting the wireless constraints and low power requirements. In this paper, a piezoceramic transducer amplifier for wireless active SHM systems has been designed. Power requirements are met by two digital On/Off switches that set the amplifier in a standby state when not in use. It provides a stable ${\pm}180$ Volts output with a bandwidth of 7k Hz using a single 12 V battery. Additionally, both voltage and current outputs are provided for feedback control, impedance check, or actuator damage verification. Vibration control tests of an aluminum beam were conducted in the University of Houston lab, while wireless active SHM tests of a wind turbine blade were performed in the Harbin Institute of Technology wind tunnel. The results showed that the developed amplifier provided equivalent results to commercial solutions in suppressing structural vibrations, and that it allows researchers to perform active wireless SHM on moving objects with no power wires from the grid.

• International Journal of Contents
• /
• 제18권1호
• /
• pp.65-75
• /
• 2022

This study aims to reveal the various differences within the factors that influence use satisfaction, continuous use intention, and media substitution intention, specifically in regard to the use motives and use behaviors of Netflix viewers. This study's results demonstrate that the following various factors affected use satisfaction, continuous use intention, and media substitution intention in differential ways. Firstly, the diversity of content influenced use satisfaction to a greater degree than social relations; and the diversity of content, social relations, and active participation all positively influenced continuous use intention. In other words, the more positively users appreciated the diversity of content, and the more strongly they had social relations, and the more actively they participated within communities, the greater degree to which they increased their continuous use intention for Netflix. However, the diversity of content and the convenience of use also had a negative effect on the media substitution intention for Netflix, which means that the more diverse the content and the more convenient the use of Netflix, the fewer the number of users who intended to cancel Netflix and subscribe to another OTT service or resubscribe to traditional media sources.

• 가족자원경영과 정책
• /
• 제6권1호
• /
• pp.1-16
• /
• 2002

The purposes of this study were to explore amount of time use for house work, leisure and extracurricular lesson used by adolescents and to explain its influencing factors. Tobit model was used to analyze the factors of time use because amount of time use was a limited continuous variable. The results of this study were as follows: 1) Amount of time used for house work per day by adolescents was found to be 36min. for weekdays and 64 min. for holidays. Amount of time used for passive leisure per day by adolescents was found to be 203min. for weekdays and 375 min. for holidays. Amount of time used for active leisure per day by adolescents was found to be 74 min. for weekdays and 194 min. for holidays. Amount of time used for extracurricular lesson per day by adolescents was found to be 96min. for weekdays and 36 min. for holidays. 2) Time use for house work was found to be significantly influenced by education status, education level of mother, job status of mother for weekdays and gender, education level of mother, job status of mother, household income for holidays. Time use for passive leisure was found to be significantly influenced by education status, small children at home for weekdays and gender, education status for holidays. Time use for active leisure was found to be significantly influenced by gender, education status for holidays, while there was no influencing factors for weekdays. Finally, time use for extracurricular lesson was found to be significantly influenced by gender, education status, household income for weekdays, and age, education level of mother for holidays.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.351-355
• /
• 2016

Welding machines are high-capacity systems used in a low-frequency range using IGBT. As their system is similar to a large transformer, most welding machines suffer a great loss because of hard switching and vast leakage inductance. A voltage-balancing circuit is designed to overcome these shortcomings. This circuit can reduce the transformer size by making it into a high frequency and reducing the input voltage by half and by adopting a serial structure that connects two full-bridges in a series to use a MOSFET with a good property at high frequency. In addition, a Schottky diode is used in the primary rectifier to overcome the low efficiency of most welding machines. To use the Schottky diode with a reliably relatively low withstanding voltage, an active snubber is adopted to effectively limit the ringing voltage of the diode cut-off voltage.

• 한국포장학회지
• /
• 제22권3호
• /
• pp.41-47
• /
• 2016

This paper provides an overview of kimchi packaging technology, focusing on packaging materials, package design, and active/intelligent packaging technology for kimchi. From a packaging-material standpoint, although various materials have been used to ensure customer satisfaction and convenience, plastic is the most widely used material, in the form of bags, trays, pouches, and rigid containers. Additionally, recent efforts in the kimchi packaging industry have allowed companies to differentiate their products by using different packaging materials and technologies, while simultaneously improving product safety and quality. On the other hand, the biggest problem in kimchi packaging is excess $CO_2$ production, leading to package expansion and leakage. To alleviate this problem, the use of $CO_2$ absorbers, high $CO_2$-permeable films, and degassing valves, in addition to the use of different packaging systems, has been investigated. Active and/or intelligent packaging systems have been developed, to include active functions beyond simply inert, passive containment and protection of the kimchi product. However, most such approaches are not yet adequately effective to be useful on a commercial scale. Therefore, further studies are needed to resolve the limitations of each technology.