• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2220-2238
• /
• 2024

As a typical active equipment, pump machinery is widely used in nuclear power plants. Although the mechanism of pump machinery in nuclear power plants is similar to that of conventional pumps, the safety and reliability requirements of nuclear pumps are higher in complex operating environments. Once there is significant performance degradation or failure, it may cause huge security risks and economic losses. There are many pumps mechanical parameters, and it is very important to explore the correlation between multi-dimensional variables and condition. Therefore, a condition monitoring model based on Deep Denoising Autoencoder (DDAE) is constructed in this paper. This model not only ensures low false positive rate, but also realizes early abnormal monitoring and location. In order to alleviate the influence of parameter time-varying effect on the model in long-term monitoring, this paper combined equidistant sampling strategy and DDAE model to enhance the monitoring efficiency. By using the simulation data of reactor coolant pump and the actual centrifugal pump data, the monitoring and positioning capabilities of the proposed scheme under normal and abnormal conditions were verified. This paper has important reference significance for improving the intelligent operation and maintenance efficiency of nuclear power plants.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.58-68
• /
• 2006

This work proposes a 10b 250MS/s $1.8mm^2$ 85mW 0.13um CMOS A/D Converter (ADC) for high-performance integrated systems such as next-generation DTV and WLAN simultaneously requiring low voltage, low power, and small area at high speed. The proposed 3-stage pipeline ADC minimizes chip area and power dissipation at the target resolution and sampling rate. The input SHA maintains 10b resolution with either gate-bootstrapped sampling switches or nominal CMOS sampling switches. The SHA and two MDACs based on a conventional 2-stage amplifier employ optimized trans-conductance ratios of two amplifier stages to achieve the required DC gain, bandwidth, and phase margin. The proposed signal insensitive 3-D fully symmetric capacitor layout reduces the device mismatch of two MDACs. The low-noise on-chip current and voltage references can choose optional off-chip voltage references. The prototype ADC is implemented in a 0.13um 1P8M CMOS process. The measured DNL and INL are within 0.24LSB and 0.35LSB while the ADC shows a maximum SNDR of 54dB and 48dB and a maximum SFDR of 67dB and 61dB at 200MS/s and 250MS/s, respectively. The ADC with an active die area of $1.8mm^2$ consumes 85mW at 250MS/s at a 1.2V supply.

• Journal of Gifted/Talented Education
• /
• v.21 no.1
• /
• pp.57-81
• /
• 2011

The purpose of this study was to explore the quality of life of musically talented students as measured by their external experiences (e.g., activities, companions) and internal experiences (e.g., flow, emotion). The participants in this study were 33 musically talented students (10 males, 23 females) aged 13 to 19. Study data were collected for 7 consecutive days using the Experience Sampling Method (ESM), which employs a cellular-phone as a signaling device. The results were as follows: First, in response to the 1625 random signals, musically talented students reported that 40.9% of their time was spent on productive activities. An additional 33.4% of time was used for maintenance activities and the rest of their time was spent on leisure/social activities. Also, musically talented students reported that 48.5% of their time was spent alone. When they were alone, they spent a lot of time engaging in productive activities (44.3%). Second, in order to measure the flow of their life, two methods were used. One used a 4-channel flow model (i.e. apathy, boredom, flow, anxiety) and the other used 8 dimensions and conditions of the flow experience (i.e. concentration, self-consciousness disappears, action and awareness merge, distorted sense of time, freedom from worry about failure, clear goals, immediate feedback, balance between challenges and skills). According to the former, when engaged in music-related activities, musically talented students usually reported flow (54.0%), while they felt apathy (41.3%) for daily routines activities. According to the latter method, musically talented students experienced flow for most productive activities, while they experienced flow least for maintenance activities. Emotional variables of ESF are comprised of 10 semantic scales (i.e. happy-sad, strong-weak, active-passive, sociablelonely, proud-ashamed, involved-detached, excited-bored, clear-confused, relaxed-worried, cooperative-competitive). Musically talented students reported experiencing the most positive emotion for social activities and experiencing the most negative emotion for maintenance activities. Results of this study assert that musically talented students had to trade off immediate enjoyment for developing their special gifts. They could not afford as much time for socializing with friends, and they had to spend more time alone compared to their peers without such gifts. Consequently, they were found to deprive themselves of the spontaneous good times that teenagers usually thrive on. They were helped in this respect by their autotelic personality traits, especially their strong need for achievement and endurance. The downside, however, is that the moment-to-moment quality of their moods suffered. The argument concerning musically talented students applies for all adolescents. The choices that talented students must make between immediate gratification and long-term development, and between solitude and companionship, are the same choices every young person must make, regardless of her or his level of talent. All of us have gifts that are potentially useful and worthy of being appreciated. But to develop these latent talents we must cultivate them, and this takes time and the investment of mental energy. The lifestyle that musically talented students develop can show us some of the choices all of us must make in order to cultivate our gifts.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.75-85
• /
• 2009

This work proposes a 13b 100MS/s 0.13um CMOS ADC for 3G communication systems such as two-carrier W-CDMA applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed ADC employs a four-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. Area-efficient high-speed high-resolution gate-bootstrapping circuits are implemented at the sampling switches of the input SHA to maintain signal linearity over the Nyquist rate even at a 1.0V supply operation. The cascode compensation technique on a low-impedance path implemented in the two-stage amplifiers of the SHA and MDAC simultaneously achieves the required operation speed and phase margin with more reduced power consumption than the Miller compensation technique. Low-glitch dynamic latches in sub-ranging flash ADCs reduce kickback-noise referred to the differential input stage of the comparator by isolating the input stage from output nodes to improve system accuracy. The proposed low-noise current and voltage references based on triple negative T.C. circuits are employed on chip with optional off-chip reference voltages. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates the measured DNL and INL within 0.70LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 64.5dB and a maximum SFDR of 78.0dB at 100MS/s, respectively. The ABC with an active die area of $1.22mm^2$ consumes 42.0mW at 100MS/s and a 1.2V supply, corresponding to a FOM of 0.31pJ/conv-step.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.46-55
• /
• 2016

This work proposes a 13b 100MS/s 45nm CMOS ADC with a high dynamic performance for IF-domain high-speed signal processing systems based on a four-step pipeline architecture to optimize operating specifications. The SHA employs a wideband high-speed sampling network properly to process high-frequency input signals exceeding a sampling frequency. The SHA and MDACs adopt a two-stage amplifier with a gain-boosting technique to obtain the required high DC gain and the wide signal-swing range, while the amplifier and bias circuits use the same unit-size devices repeatedly to minimize device mismatch. Furthermore, a separate analog power supply voltage for on-chip current and voltage references minimizes performance degradation caused by the undesired noise and interference from adjacent functional blocks during high-speed operation. The proposed ADC occupies an active die area of $0.70mm^2$, based on various process-insensitive layout techniques to minimize the physical process imperfection effects. The prototype ADC in a 45nm CMOS demonstrates a measured DNL and INL within 0.77LSB and 1.57LSB, with a maximum SNDR and SFDR of 64.2dB and 78.4dB at 100MS/s, respectively. The ADC is implemented with long-channel devices rather than minimum channel-length devices available in this CMOS technology to process a wide input range of $2.0V_{PP}$ for the required system and to obtain a high dynamic performance at IF-domain input signal bands. The ADC consumes 425.0mW with a single analog voltage of 2.5V and two digital voltages of 2.5V and 1.1V.

• Science of Emotion and Sensibility
• /
• v.11 no.4
• /
• pp.489-500
• /
• 2008

The purpose of this study was to determine the preference and purchasing intention on necktie pattern designs according to male consumers' fashion lift style. Written questionnaires were handed out to 300 male consumers of the 20-40 years old in Seoul and surroundings, who were accessed by a convenience sampling method. The questionnaires were to classify male consumer groups according to the fashion life style, to examine characteristics, needs and wants of each group. The stimuli of 8 kinds of necktie patterns in black & white, and the semantic differential scale were applied to evaluate the preference and purchasing intention on necktie pattern design. A total of 265 samples were analyzed by factor analysis, cluster analysis, ANOVA, crosstabs and $X^2$-test through SPSS package program. Six factors in their fashion life style were extracted as follows: those were 'fashion-oriented', 'traditional conservative', 'brand-flaunting', 'personality-oriented', 'practicality-oriented' and 'unconcerned' life style. With these life style sub-dimensions, male consumers were segmented into five groups: these groups were 'strong personal seekers', 'practical brand seekers', 'traditional personal seekers', 'active fashion seekers', 'unconcerned group'. Each of these groups of male consumers showed significant differences in the preference and purchasing Intension of necktie pattern designs according to their fashion life style.

• Culinary science and hospitality research
• /
• v.22 no.3
• /
• pp.240-253
• /
• 2016

The purpose of this study is to predict factors influencing participant demand for the temple stays and to help find alternatives for temple stay marketing strategies. Specifically, the study sought to examine input variables on the visit frequency of temple visitors who partook in temple food. Research subjects were temple stay participants with experience with temple food. Through convenience sampling method, 300 self-administered questionnaires were distributed to participants at 4 temple stays in Seoul. Of the 278 questionnaires collected, 232 (83%) were used for research analysis. Given that the requirement that proper model for analysing the collected data be applied, the Truncated Negative Binomial(TNB) Poisson model, which is useful for analysing count data that are truncated at '0' and overcrowded with a certain value, was selected fort his study. Study results found that, for temple stay food revitalization, the most crucial item for temple food proponents to recognize is natural food ingredients. The degree of affection was higher among respondents over 40 years of groups and with incomes over 40 million won or more than others. In addition, unmarried and male were higher than married and female, and the Christian population in the temple food demand higher impact than Shamanism community. This match should be a priority to establish an in-depth public relations policy of targeted marketing of consumers according to various demographic characteristics. Active and aggressive efforts to expand food inspection are required to promote the healthy image of the temple food to the fragmentation of consumer marketing hierarchy.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.25 no.1
• /
• pp.84-103
• /
• 2012

Objectives : The middle school students'life style were studied with focus on Body Mass Index(BMI). Information was collected during 1st June 2009 to 10th July from 397 students(both male and female) by the subjective survey centered on personal characteristic, understanding about health in general, everyday activities, eating habits, preference in food, understanding about diet and obesity, and thoughts about fitness and diet. Methods : Students were selected from six classes by convenience sampling, then the final analysis was performed on 397 self-administered questionnaires, excepting 5 questionnaires, which have insincere answers. The data collection was carried out by SPSS(V.14.0 English Version), and the data was verified by $x^2$-test, ANOVA, multiple regression analysis. Results and Conclusion : The survey subjects were in the following distribution of body weights - underweight: 63.6%, normal weight: 29.5% and 6.9% were overweight. There was significantly different between BMI and mothers' occupation and satisfaction with school life(p<0.05). As for the analysis(multiple regression analysis) on understanding about health, the factors that affect BMI are self recognition of figure and efforts to reduce weight. In terms of efforts for one's own health, 78.2% of under weight and 82.3% of normal weight were taking active initiatives. But 85.2% of the overweight students were not giving any efforts. As for the free time activities, more than half answered, 'playing with computers'(48.4 - 66.7%, 1.57 hours on average). As for TV, on average, 2.03 hours were spent in overall. And it turned out that the overweight students spent more time watching TV by 46.49 minutes(0.77 hours) on average(p<0.05). 7.4 hours was the average sleeping time. As for the eating habit,'quantity of meal, snack, meal between meals, fat reduction, and supplementary food'were shown to be related to the BMI(p<0.05). The instant food, meat and sweet food were shown to be also related to the BMI. In terms of knowledge about overweight and diet, only 8 students(2% of the total) answered all 10 questions correct. On average, 7-8 questions were correctly answered(53.9 %). When the scores were analyzed against the BMI by classifying the scores to high, middle and low categories, it showed a relationship by different weight group(p<0.02), and the overweight students had higher score by 0.82 compared to the underweight students. When thoughts and attitude on fitness and diet were analyzed in relationship to the BMI, the result was only - "I try to eat fruits more often"(fruits)(p<0.00).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.47-55
• /
• 2005

This work describes an 8b 240 MS/s CMOS ADC as one of embedded core cells for high-performance displays requiring low power and small size at high speed. The proposed ADC uses externally connected pins only for analog inputs, digital outputs, and supplies. The ADC employs (1) a two-step pipelined architecture to optimize power and chip size at the target sampling frequency of 240 MHz, (2) advanced bootstrapping techniques to achieve high signal bandwidth in the input SHA, and (3) RC filter-based on-chip I/V references to improve noise performance with a power-off function added for portable applications. The prototype ADC is implemented in a 0.18 um CMOS and simultaneously integrated in a DVD system with dual-mode inputs. The measured DNL and INL are within 0.49 LSB and 0.69 LSB, respectively. The prototype ADC shows the SFDR of 53 dB for a 10 MHz input sinewave at 240 MS/s while maintaining the SNDR exceeding 38 dB and the SFDR exceeding 50 dB for input frequencies up to the Nyquist frequency at 240 MS/s. The ADC consumes, 104 mW at 240 MS/s and the active die area is 1.36 ㎟.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.663-666
• /
• 2005

Gas hydrates are ice-like compounds that form at the low temperature and high pressure conditions common in shallow marine sediments at water depths greater than 300-500 m when concentrations of methane and other hydrocarbon gases exceed saturation. Estimates of the total mass of methane carbon that resides in this reservoir vary widely. While there is general agreement that gas hydrate is a significant component of the global near-surface carbon budget, there is considerable controversy about whether it has the potential to be a major source of fossil fuel in the future and whether periods of global climate change in the past can be attributed to destabilization of this reservoir. Also essentially unknown is the interaction between gas hydrate and the subsurface biosphere. ODP Leg 204 was designed to address these questions by determining the distribution, amount and rate of formation of gas hydrate within an accretionary ridge and adjacent basin and the sources of gas for forming hydrate. Additional objectives included identification of geologic proxies for past gas hydrate occurrence and calibration of remote sensing techniques to quantify the in situ amount of gas hydrate that can be used to improve estimates where no boreholes exist. Leg 204 also provided an opportunity to test several new techniques for sampling, preserving and measuring gas hydrates. During ODP Leg 204, nine sites were drilled and cored on southern Hydrate Ridge, a topographic high in the accretionary complex of the Cascadia subduction zone, located approximately 80km west of Newport, Oregon. Previous studies of southern Hydrate Ridge had documented the presence of seafloor gas vents, outcrops of massive gas hydrate, and a pinnacle' of authigenic carbonate near the summit. Deep-towed sidescan data show an approximately $300\times500m$ area of relatively high acoustic backscatter that indicates the extent of seafloor venting. Elsewhere on southern Hydrate Ridge, the seafloor is covered with low reflectivity sediment, but the presence of a regional bottom-simulating seismic reflection (BSR) suggests that gas hydrate is widespread. The sites that were drilled and cored during ODP Leg 204 can be grouped into three end-member environments basedon the seismic data. Sites 1244 through 1247 characterize the flanks of southern Hydrate Ridge. Sites 1248-1250 characterize the summit in the region of active seafloor venting. Sites 1251 and 1252 characterize the slope basin east of Hydrate Ridge, which is a region of rapid sedimentation, in contrast to the erosional environment of Hydrate Ridge. Site 1252 was located on the flank of a secondary anticline and is the only site where no BSR is observed.