• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.4
• /
• pp.17-22
• /
• 2009

FlexRay is a new standard of network communication system which provides solutions to the degradation problems generated by many ECU (Electronic Control Unit) connections in automobiles and automation systems. The upper bound of the data rate is 10Mbps and it provides two channels for redundancy In this paper, FlexRay system is first designed using SDL. For hardware implementation, FlexRay system is designed using Verilog HDL based on the SDL design result. The designed system is synthesized using Synopsys Design Compiler with the Magna/Hynix 0.18 um cell library. In this paper, to construct a FlexRay network, active star is used since active star systems can provide high speed data transmission up to 10Mbps. The performance of the star network is tested using one transmitter node and two receiver nodes.

• Journal of Multimedia Information System
• /
• v.4 no.1
• /
• pp.19-26
• /
• 2017

The compression of video for both full HD and UHD requires the inclusion of extra vertical lines to every video frame, named as the DTV essential hidden area (DEHA), for the effective functioning of the MPEG-2/4/H encoder, stream, and decoder. However, while the encoding/decoding process is dependent on the DEHA, the DEHA is conventionally viewed as a redundancy in terms of channel utilization or storage efficiency. This paper proposes a block mode DEHA method to more effectively utilize the DEHA. Partitioning video block images and then evenly filling the representative DEHA macroblocks with the average DC coefficient of the active video macroblock can minimize the amount of DEHA data entering the compressed video stream. Theoretically, this process results in smaller DEHA data entering the video stream. Experimental testing of the proposed block mode DEHA method revealed a slight improvement in the quality of the active video. Outside of this technological improvement to video quality, the attractiveness of the proposed DEHA method is also heightened by the ease that it can be implemented with existing video encoders.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.10
• /
• pp.1014-1020
• /
• 2009

This work deals with navigation of an omni-directional mobile robot with active caster wheels. Initially, the posture of the omni-directional mobile robot is calculated by using the odometry information. Next, the position accuracy of the mobile robot is measured through comparison of the odometry information and the external sensor measurement. Finally, for successful navigation of the mobile robot, a motion planning algorithm that employs kinematic redundancy resolution method is proposed. Through experiments for multiple obstacles and multiple moving obstacles, the feasibility of the proposed navigation algorithm was verified.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3163-3165
• /
• 2000

In code division multiple access systems using all-optical signal processing, the optical multiple access interference by simultaneous multiple users degrades the system performance and eventually can limit the number of active users. To reduce the effect of the interference, error-correction codes are used in 2-dimensional FO-CDMA systems. In this paper we propose a method of applying product code to 2-dimensional FO-CDMA systems. The proposed coding scheme can correct a random error and burst errors with small redundancy to the conventional case. In result we show significant performance enhancement of the system in terms of HER, the number of active users.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.6
• /
• pp.2735-2751
• /
• 2020

The emergence of Software Defined Networking (SDN) overcomes the limitations of traditional networking architectures. There are some advantages in SDN which are centralized global network view, programmability, and separation of the data plane and control plane. Due to the limitation of data plane storage capacity in SDN, it is necessary to process the redundancy rules of switch. In this paper, we propose a method for active detection and processing of redundant rules. We use the result generated by the customized probe package to detect redundant rules. And by checking the forwarding behavior of probe packets in the data plane, the redundancy rules are further processed. Furthermore, in order to quickly check the dynamic networks, we propose an incremental algorithms for rapidly evolve the network strategies. We conduct simulation experiments on Matlab to verify the feasibility of the algorithm. The influence of some parameters on the result are discussed.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.129-130
• /
• 2010

For the high power demand and N+1 redundancy, this paper presents the digital load share (LS) controller design and the implementation of paralleled phase-shifted full-bridge converters (PSFBC) used in distributed power systems. By adopting the digital control strategy, separately used ICs for PSFBC and LS control functions in analog systems can be merged into a cost-effective digital controller. To compensate and stabilize both PSFBC and LS loops with the direct digital design approaches, small-signal model of the system is derived in discrete-time domain. The steady-state and dynamic load sharing performances are also investigated. Experimental results from two 1.2 kW paralleled PSFBC modules are shown to verify the proposed work.

• International Journal of Reliability and Applications
• /
• v.3 no.3
• /
• pp.147-154
• /
• 2002

In this paper, we consider the warm standby redundant system(WSRS) which is consisted of an active unit, a standby unit and a switchover device. In addition, the switchover processing is controlled by a control module. The effect of failure of the control module is taken into account to develop our reliability model for the redundant structure. For the performance evaluation of a redundant system with the function of switchover processing which is assumed to cause the increase of the failure rate of the system, some reliability indices, such as availability, average availability, reliability and steady state availability, are considered.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.51-58
• /
• 2013

This paper proposes the power conversion mechanism of a bailer-charge-transfer zero-current-switching (CT-ZCS) circuit. The operation modes are analyzed and researched using state trajectory equations. The topology of CT-ZCS based on soft-switching inverters offers some merits such as: tracking the input reference signal dynamically, bearing load shock and short circuit, multiplying inverter N+1 redundancy parallel, coordinating power balance for easy control, and soft-switching commutation for high efficiency and large capacity. These advantages are distinctive from conventional inverter topologies and are especially demanded in AC drives: new energy generation and grid, distributed generation systems, switching power amplifier, active power filter, and reactive power compensation and so on. Prototype is manufactured and experiment results show the feasibility and dynamic voltage-tracking characteristics of the topology.

• International Journal of Reliability and Applications
• /
• v.2 no.2
• /
• pp.107-115
• /
• 2001

This paper considers some reliability indices, such as availability, average availability, reliability and steady state availability, of a redundant system with the function of switchover processing. We also derive the confidence limits for steady state availability of such system. The system, which is considered in this paper, consists of an active unit, a standby unit and a switchover device. In addition, the switchover processing is controlled by a control module. The effect of failure of the control module is taken into account to develop our reliability model for the redundant structure. Numerical examples are presented to illustrate our results.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.13-20
• /
• 2023

This paper presents a fault tolerant control strategy for Steer-by-Wire (SbW) systems. Among many problems to be solved before commercialization of SbW systems, maintaining reliability and fault tolerance in such systems are the most pressing issues. In most previous studies, dual steering motors are used to achieve actuation redundancy. However, relatively few studies have been conducted to introduce fault tolerant control strategies using rear wheel steering system. In this work, an actuator fault in front wheel steering is compensated by active rear wheel steering. The proposed fault tolerant control algorithm consists of disturbance observer and sliding mode control. The fault tolerant control performance of the proposed approach is validated via computer simulation studies with Carsim vehicle dynamics software and MATLAB/Simulink.