• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.158.4-158
• /
• 2001

This paper presents a novel circuit configuration for realizing the continuous-time active-only voltage-mode integrator. The proposed integrator consists only of internally compensated type operational amplifier (OA) and operational transconductance amplifiers (OTAs). Since no external passive elements are required, the integrator is suitable for integrated circuit implementation in either bipolar or CMOS technologies. Moreover, the integrator gain can be electronically tuned by adjusting the bias currents of the OTAs. The characteristics of the proposed integrator and the effectiveness of the design procedure in realizing various analog transfer functions have been examined by PSPICE simulation.

• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.52-62
• /
• 1996

In this paper, a new continuous-time current-mode integrator as basic building block of the low-voltage analog current-mode active filters was proposed. Compared to the current-mode integrator which was proposed by Zele, the proposed current-mode integrator had higher unity gain frequency and output impedance in addition to lower power dissipation. And also, a current-mode third-order lowpass active filter was designed with the proposed current-mode integrator. The designed circuits were fabricated using the ORBIT's 1.2.mu.m double-poly double-metal CMOS n-well process. The experimental resutls of the active filter designed and fabricated for this research have shown that it has the performance of 44.5MHz cutoff frequency, 3.3mW power dissipation and the third-order active filter area was 0.12mm$^{2}$.

• 전자공학회논문지
• /
• 제54권1호
• /
• pp.26-32
• /
• 2017

본 논문에서는 설계 요구가 높고, 전력 소모가 높은 opamp를 이용하는 기존의 능동형 적분기를, 수동형 적분기로 대체하여 고속의 저전력, 고해상도 특성을 갖는 incremental delta-sigma ADC를 소개한다. 능동형 적분기에서 수동형 적분기로의 변환을 위해, 기존의 능동형 적분기의 특성을 분석하였다. 이를 바탕으로 opamp의 설계 요구를 낮추고, 더 나아가 opamp를 사용하지 않는 저전력의 수동형 적분기를 제안하였다. 65nm 공정을 이용하여 수동형 적분기로 구성된 1차 single-bit incremental delta-sigma ADC를 설계하였다. Transistor-level 시뮬레이션 결과, 이는 supply 전압이 1.2V인 상황에서 modulator만 0.6uW, digital filter를 포함한 ADC 전체에서 6.25uW를 소모하며 BW 22KHz, SNDR 71dB, dynamic range 74.6dB을 달성하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.747-750
• /
• 2002

A circuit building block for realizing a continuous-time active-only current-mode integrator is presented. The proposed integrator is composed only of internally compensated type operational amplifier (OA) and operational transconductance amplifiers (OTAs). The integrator is suitable for integrated circuit implementation in either bipolar or CMOS technologies, since it does not require any external passive elements. Moreover, the integrator gain can be tuned through the transconductance gains of the OTAs. Some application examples in the realization of current-mode network functions using the proposed current-mode integrator as an active element are also given.

• 전자공학회논문지C
• /
• 제35C권6호
• /
• pp.30-38
• /
• 1998

본 논문에서는 능동필터 설계시 기본 블록으로 이용될 수 있으며, 저전압 고주파에서 동작 가능한 새로운 구조의 CMOS 전류모드 적분기를 제안하였다. 더불어 전압조절을 통해 그 이득과 주파수를 제어할 수 있는 트랜스컨덕턴스 제어회로를 설계하였다. 제안된 적분기는 CMOS 상보형 회로로 구성하였으며, 따라서 적분기의 단위이득주파수에 영향을 주는 적분기의 트랜스컨덕턴스를 증가 시켰다. 제안된 적분기의 단위이득 주파수는 NMOS-gm을 가지는 기존의 적분기에 비하여 두 배 가까이 증가되었다. 또한 트랜스컨덕턴스 제어회로를 이용하여 능동필터의 공정시 나타날 수 있는 오차를 줄이고, 그 용도에 따라 주파수와 이득제어를 가능하게 하였다. 이의 응용회로로서 3차 체비셰프 저역필터를 0.8㎛ CMOS 파라메터를 이용하여 설계하였으며, 이러한 결과들은 소신호 해석 및 0.8㎛ 공정 파라미터를 갖는 HSPICE 시뮬레이션을 통하여 검증되었다.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1254-1259
• /
• 2008

A new CMOS current-mode integrator for low-voltage analog integrated circuit design is presented. The proposed current-mode integrator is based on cross-coupled gain-boosting topology. When it is compared with that of the typical current-mirror type current-mode integrator, the proposed current-mode integrator achieves high current gain and unity gain frequency with the same transistor size. As a application circuit of the proposed integrator, we designed the 1.8V 200MHz band current-mode lowpass filter. These are verified by Hspice simulation using $0.18{\mu}m$ CMOS technology.

• 한국통신학회논문지
• /
• 제22권4호
• /
• pp.685-695
• /
• 1997

In this paper, a new CMOS continuous-time fully-differential current-mode integrator is proposed as a basic building block of the low-voltage high frequency current-mode active filter. The proposed integrator is composed of the CMOS complementary circuit which can extend transconductance of an integrator. Therefore, the unity gain frequency which is determined by a small-signal transconductance and a MOSFET gate capacitance can be expanded by the complementary transconductance of the proposed integrator. And also the magnitude of pole and zero are increased. The unity gain frequency of the proposed integrator is increased about two times larger than that of the conventional continuous-time fully-differential integrator with NMOS-gm. These results are verified by the small signal analysis and the SPICE simulation. As an application circuit of the proposed fully-differential current-mode integrator, the three-pole Chebyshev lowpass filter is designed using 0.8.$\mu$m CMOS processing parameters. SPICE simulation predicts a 3-dB bandwidth of 148MHz and power dissipation of 4.3mW/pole for the three-pole filter with 3-V power supply.

• 한국음향학회지
• /
• 제16권3호
• /
• pp.106-113
• /
• 1997

본 논문에서는 저전압 아날로그-디지털 혼성모드 신호처리를 위한 3V CMOS 연속시간 완전균형 적분기가 설계되었다. 설계된 완전균형 적분기의 기본구조는 NMOS와 PMOS 트랜지스터를 이용한 상보형 회로이며, 이러한 상보형 회로는 적분기의 트랜스컨덕턴스를 증가시킬수 있는 장점이 있다. 그리고 트랜스컨덕턴스의 증가는 적분기의 단위이득 주파수, 폴 그리고 영점을 증가시킨다. 소신호해석과 SPICE 시뮬레이션을 통해 기존의 적분기들과 비교하여 이러한 개선점들을 증명하였다. 0.8 3V CMOS CMOS 공정 파라미터를 이용하여 완전균형 상보형 적분기의 응용회로로서 3차 능동 지역통과 필터를 설계하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2354-2363
• /
• 2018

This paper proposed a novel double closed control strategy for single-phase voltage source pulse width modulation (PWM) rectifier based on active disturbance rejection control (ADRC) and dq current decoupling control. First, the mathematical model of the single-phase PWM rectifier in the d-q axis synchronous rotating reference frame is established by constructing a virtual component using a second-order generalized integrator (SOGI). Then, the mathematical model is simplified according to the active power conservation, and the first-order equation of single-phase PWM rectifier voltage outer loop is acquired. A linear auto-disturbance rejection controller is used to design the voltage outer loop according to the first-order equation. Finally, the proposed control strategy and the traditional PI control are compared and verified by simulation and physical experiments. Both simulation and experimental results confirm that the proposed control strategy has excellent dynamic performance and strong rejection ability to disturbances.

• Journal of Electrical Engineering and information Science
• /
• 제2권4호
• /
• pp.14-18
• /
• 1997

A design methodology of the analog current-mode and width programmable integrator for a low voltage (3V) and low power application is developed and the integrator designed by this method is successfully fabricated by the 0.8$\mu\textrm{m}$ CMOS n-well single poly/double metal standard digital process. The integrator occupies the active chip area of 0.3$\textrm{mm}^2$. The experimental result illustrates a low power dissipation (1.0mW∼3.55 mW), 65dB of the dynamic range, and digitally and width programmability (10MHz∼30MHz) with an external digital 4 bit.