• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.409-413
• /
• 2022

Objective: This study aims to compare the range of motion of the joints by applying the contraction and relaxation techniques used in manual therapy as electrical stimulation treatment. Based on this, we would like to propose the possibility of using motor nerve electrical stimulation therapy for musculoskeletal physical therapy. Design: Single-arm interventional study Methods: Active and passive straight leg raising tests were performed on 20 healthy men and women in their 20s to measure the angle of hip joint flexion. Then, the electrical stimulation time was set to 10 seconds and 5 seconds of rest, and motor nerve electrical stimulation of 1 Hz was applied with the maximum strength that could withstand the hamstring muscles for 10 minutes. After electrical stimulation, straight leg raising tests again to confirm the range of motion of the hip joint flexion. Results: As a result of this study, it was confirmed that the joint range of motion was significantly improved for both active and passive straight leg raising tests after application of motor nerve electrical stimulation(p<.05). Conclusions: With a strong electrical stimulation treatment of 1 Hz, the effect similar to the contraction and relaxation technique used in manual therapy was confirmed through the joint range of motion. In the future, motor nerve electrical stimulation therapy can be used for musculoskeletal physical therapy to provide a new approach for patients with reduced pain and joint range of motion due to muscle tension.

• Journal of muscle and joint health
• /
• v.5 no.2
• /
• pp.253-264
• /
• 1998

This study has done for the purpose of investigation among the degrees of pain coping strategies, pain, and depression of patients with rheumatoid arthritis. The subjects of this study were 214 patients diagnosed with rheumatoid arthritis. The data were collected from september 4 to 16, 1995 by questionnaires. The data were analysed by the use of frequency, t-test, Pearson Correlation Coefficients, ANOVA, and Duncan test. The results Were as follows ; 1. The mean score of pain was 213.5(range : 4-390) and that of depression was 21.4 (range : 1-50). The mean score of passive pain coping strategies was 30.2(range : 11-48) and that of active pain coping strategies was 18.6(range : 7-33) 2. The passive pain coping degree showed a positive correlation with the pain degree (r=.475, p=.0001) and the active pain coping degree showed a inversive correlation with that(r= -.296, p=.0001). The passive pain coping degree showed a positive correlation with the depression degree (r=.425, p=.0001) and the active pain coping degree showed a inversive correlation with that(r=-.299, p=.0001). The pain degree showed a positive correlation with the depression degree(r=.374, p=.0001).

• The Journal of Korean Physical Therapy
• /
• v.19 no.4
• /
• pp.43-51
• /
• 2007

Purpose: The purpose of this study was to determine the effects on improvement of the range of motion in the TM joint. Methods: 26 subjects who have TM joint limitation were divided to passive movement group(n=13, $21.3{\pm}2.95$ years) and active movement group(n=13, $20.62{\pm}1.39$ years). All of the subjects were treated 5 to 10 minutes per one time, five times once a week for 4 weeks by the physical therapist. The open bite and cross bite were investigated at before, during(2 wks) and treatment(4 wks). Results: In order to assure the statistical significance of the result, a Repeated measures ANOVA were applied at the 0.05 level of the significance. There was a significant difference in terms of the rates of open bite mean change in within-open bite effects among pre-test, post-test 2weeks and post-test 4weeks in each group(P=0.029). There was no significant difference in the rates of mean change in between-open bite effects(P=0.441) but interactions between two types of effects(P=0.025) were statistical significance among pre-test, post-test 2 weeks and post-test 4 weeks in each group. There was no significant difference in the rates of mean change in within-close bite effects(P=0.112), between-cross bite(P=0.179) and interactions between the two types of effects(P=0.098) among pre-test, post-test 2 weeks and post-test 4 weeks in each group. Conclusion: The results of this study showed that passive movement and active movement were effect on increase of TM joint ROM about open bite and cross bite.

• The Journal of Korean Physical Therapy
• /
• v.15 no.3
• /
• pp.126-152
• /
• 2003

The purpose of this study was to evaluate the value of passive caudal gliding mobilization of the glenohumeral joint on the range of motion (ROM) of active and passive abduction; to evaluate the value of pain relief through visual analogue scale (VAS); to evaluate the correlation between improvement of shoulder abduction and intra-articular movement measured by fluoroscopy in frozen shoulder patients. The subjects consisted of twenty-one patients with clinically diagnosed frozen shoulder (11 males, 10 females) between 40 and 63 years of age (mean age : 52.7 years). The traction and caudal gliding mobilization based on the convex-concave rule in the resting position and at end range of abduction was peformed for 15 minutes per day and was repeated 10 times during a 2 week period. The ROM of abduction was measured by goniometer and pain was measured by VAS. The intra-articular movement was measured by fluoroscope, Neurostar Plus TOP (Siemens, Germany). ROM measurements of each patient was acquired at pre-treatment, immediate post-treatment and 2 week post-treatment. Statistical analysis was performed using SPSS 10.0 for Windows software and data was analyzed using the paired-test and the pearson correlation. The results of this study are as follows: 1. There was a significant decrease of VAS between pre-treatment data and 2 week post-treatment data (P<.05) but no significant difference between pre-treatment and immediate post-treatment data (P>.05). 2. There was a significant increase in ROM of active and passive abduction in the pre-treatment data, immediate post-treatment data, and in 2 week post-treatment data (P<.05). 3. With regard to results of the joint play test, there was a significant difference in the grade of traction between pre-treatment data and immediate post-treatment data and between pre-treatment data and 2 week post-treatment data (P<.05). There was no significant difference between immediate post-treatment data and 2 week post-treatment data (P>.05). 4. With regard to results of the joint play test, there was a significant difference in the grade of caudal gliding between pre-treatment data and immediate post-treatment data and between pre-treatment data and 2 week post-treatment data (P<.05). There was no significant difference between immediate post-treatment data and 2 week post-treatment data (P>.05), 5. With regard to the results of fluoroscopic findings, there was a significant change of the glenohumeral joint space between pre-treatment data and immediate post-treatment data and between immediate post-treatment data and 2 week post-treatment data (P<.05). There was no significant change of the glenohumeral joint space between immediate post-treatment data and 2 week post-treatment data (P>.05). 6. With regard to the results of fluoroscopic findings, there was a significant change of acromiohumeral joint space between the three data (pre-treatment data, immediate post-treatment data, 2 week post-treatment data) (P<.05). 7. Mobility grade by joint play test was significantly increased and was correlated to improved ROM of active and passive abduction (P<.05). In this study of frozen shoulder, passive caudal gliding techniques of the glenohumeral joint results in statistically significant changes in active and passive abduction as well as in VAS. There is also a significant correlation between joint play test and ROM of abduction.

• Smart Structures and Systems
• /
• v.24 no.1
• /
• pp.95-110
• /
• 2019

The semi-active impact damper (SAID) is proposed to improve the damping efficiency of traditional passive impact dampers. In order to investigate its damping mechanism and vibration control effects on realistic engineering structures, a 20-story nonlinear benchmark building is used as the main structure. The studies on system parameters, including the mass ratio, damping ratio, rigid coefficient, and the intensity of excitation are carried out, and their effects both on linear and nonlinear indexes are evaluated. The damping mechanism is herein further investigated and some suggestions for the design in high-rise buildings are also proposed. To validate the superiority of SAID, an optimal passive particle impact damper ($PID_{opt}$) is also investigated as a control group, in which the parameters of the SAID remain the same, and the optimal parameters of the $PID_{opt}$ are designed by differential evolution algorithm based on a reduced-order model. The numerical simulation shows that the SAID has better control effects than that of the optimized passive particle impact damper, not only for linear indexes (e.g., root mean square response), but also for nonlinear indexes (e.g., component energy consumption and hinge joint curvature).

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.47-54
• /
• 2020

Integration of active and passive waveguides is an essential component of the photonic integrated circuit and its elements. Butt joint is one of the important technologies to accomplish it with significant advantages. However, it suffers from high optical loss at the butt joint junction and need of accurate process control to align both waveguides. In this study, we used beam propagation method to simulate an integrated device composed of a laser diode and spot size converter (SSC). Two SSCs with different mode properties were combined with laser waveguide and optical coupling efficiency was simulated. The SSC with larger near field mode showed lower coupling efficiency, however its far field pattern was narrower and more symmetric. Tapered passive waveguide was utilized for enhancing the coupling efficiency and tolerance of waveguide offset at the butt joint without degrading the far field pattern. With this technique, high optical coupling efficiency of 89.6% with narrow far field divergence angle of 16°×16° was obtained.

• Physical Therapy Korea
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2015

The common features of walking in patients with stroke include decreased gait velocity and increased asymmetrical gait pattern. The purpose of this study was to identify important factors related to impairments in gait velocity and asymmetry in chronic stroke patients. The subjects were 30 independently ambulating subjects with chronic stroke. The subjects' impairments were examined, including the isokinetic peak torque of knee extensors, knee flexors, ankle plantarflexors, and ankle dorsiflexors. Passive and active ranges of motion (ROM) of the ankle joint, ankle plantarflexor spasticity, joint position senses of the knee and ankle joint, and balance were examined together. In addition, gait velocity and temporal and spatial asymmetry were evaluated with subjects walking at their comfortable speed. Pearson correlations and multiple regressions were used to measure the relationships between impairments and gait speed and impairments and asymmetry. Regression analyses revealed that ankle passive ROM and peak torque of knee flexors were important factors for gait velocity ($R^2=.41$), while ankle passive ROM was the most important determinant for temporal asymmetry ($R^2=.35$). In addition, knee extensor peak torque was the most significant factor for gait spatial asymmetry ($R^2=.17$). Limitation in ankle passive ROM and weakness of the knee flexor were major contributors to slow gait velocity. Moreover, limited passive ROM in the ankle influenced the level of temporal gait asymmetry in chronic stroke patients. Our findings suggest that stroke rehabilitation programs aiming to improve gait velocity and temporal asymmetry should include stretching exercise for the ankle joint.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.4 no.1
• /
• pp.35-43
• /
• 1998

This study was introduce to Manual Mobilization of the Extremity Joints of Freddy M. Kaltenborn(1989). Much of Orthopedic Manipulative Therapy is devoted to the evaluation and treatment of joint and related soft tissue disorders and one of the primary treatment methods is mobilization. When examination reveals joint dysfunction, especially decreased range of motion, joint mobilization techniques are often utilized. Kaltenborn's joint mobilization techniques are performed as passive examination or treatment movements by the therapist. There are three basic joint play movements: (1) traction, (2) compression, and (3) translatoric gliding. The purpose of joint mobilization is to restore normal, painless joint function. Mechanically, the goal is to restore joint play and thus normalize roll-gliding which occurs during active movements.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.831-834
• /
• 2010

This paper proposes a new joint channel coding algorithm based on principal component analysis. A conventional joint channel coder using passive downmixing undergoes a reduction of both the primary-to-ambient energy ratio (PAR) of the downmix signal and the panning gain ratio of the primary source. The proposed system preserves the PAR of the downmix signal by using active downmixing which reflects spatial characteristic. The proposed system also improves the accuracy of the panning gain ratio estimation. Computer simulations and subjective listening tests verify the performance of the proposed system.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2006.02a
• /
• pp.1-14
• /
• 2006

[ $\blacklozenge$ ] PCB에 있어서 Embedded passive 는chip을 직접 내장하는 방법과 특별한 특성을 갖는 재료 및 공법을 사용하여 chip 응 대치하는 방법이 있다. $\blacklozenge$ Embedded passive PCB가 적용될 수 있는 유력한 적용 분야는 소형화가가 요구되는 분야와 고속 특성이 요구되는 분야를 들 수 있고, 따라서, Module, SOP/SIP, Package substrate 등이 우선적으로 적용될 수 있는 분야다. $\blacklozenge$ Embedded capacitor를 적용한 경우, 일반적인 chip capacitor를 적용한 경우보다 더 좋은 전기적인 특성(SRF, Q)을 얻을 수 있으며, solder joint 등의 영향을 포함하면 더욱 좋은 특성이 얻어질 수 있다. $\blacklozenge$ Embedded passive 의 상용화를 위해서, 공차를 관리하는 방법의 개발과 공차에 대한 합리적인 규격을 설정하는 것이 우선 과제이다. $\blacklozenge$ Embedded resistor 의 경우, Laser trim을 적용하여 ${\pm}\;5\%$ 또는 그 이하의 공차를 실현할 수 있고, $30\;K\Omega/sq$. 의 고저항의 적용까지 가능하다. $\blacklozenge$ 고속 신호에서의 noise 감소, module, SIP/SOP 의 소형화를 실현하는데 Embedded passive(혹은 active)PCB 가 기여 할 수 있을 것이고, 이를 위하여 Set 업체, PCB 업체, 재료 업체간의 지속적인 협조가 필요할 것이다.