• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.406-408
• /
• 2005

In this literature, when the utility line is normal, the Off-Line UPS operates as an active power filter to compensate the reactive power from a load, and when the utility line is in outage, the On-Line UPS opuates as in single phase inverter to supply an active and reactive power to the load. An additional static switch in UPS was used to decrease an transient state during these mode changes. And the result shows that the transient state disappeared.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.186-189
• /
• 2002

This paper presents an improved ZVT(Zero Voltage Transition) DC/DC Boost Converter using Active Snubber. The Conventional ZVT PWM Boost Converter is improved to minimize the switching loss of auxiliary switch using the minimum number of the components. In this thesis, advantage and disadvantages of Conventional ZVT Converter using a auxiliary resonant circuit is discussed. Then Improved ZVT soft switching converter will be discussed. In comparison a previous ZVT converter, The proposed converter reduces turn-off switching loss of the auxiliary switch Therefore, the proposed converter has a high efficiency by active snubber. The prototype of 100kHz, 2kW system was implemented to show the improved performance.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.723-730
• /
• 2012

This paper presents a new ZVS single phase bridgeless (Power Factor Correction) PFC, using an active clamp to achieve zero-voltage-switching for all main switches and diodes. Since the presented PFC uses a bridgeless rectifier, most of the time, only two semiconductor components are in the main current path, instead of three in conventional single-switch configurations. This property significantly reduces the conduction losses,. Moreover, zero voltage switching removes switching loss of all main switches and diodes. Also, auxiliary switch turns on zero current condition. The presented converter needs just a simple non-isolated gate drive circuitry to drive all switches. The eight stages of each switching period and the design considerations and a control strategy are explained. Finally, the converter operation is verified by simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.365-366
• /
• 2015

Shunt active power filter is a complete current source which can provide an effective and adjustable solution for elimination of harmonic currents in power system. Its performance depends on strategy employed in reference current generation, control technique and topology of converter used in the design.[1-2]. In this paper Three Phase Six switch Z-source rectifier with active power filtering capability based on instantaneous reactive power theory is described. Thanking to the theory power factor and THD value are significantly improved. Experiment results and conclusions are presented.

• 전력전자학회논문지
• /
• 제23권4호
• /
• pp.273-280
• /
• 2018

This paper proposes a zero-voltage-transition pulse-width modulation (PWM) DC-DC converter that uses a new active-snubber-cell. The converter main switch can be turned on and off with ZVS, while the snubber switch is turned on with ZCS and turned off with ZVS. Other semiconductor devices are operated under the soft-switching condition. Normal PWM control can be used, the proposed active-snubber-cell does not impose any additional voltage and current stresses. The active-snubber-cell is suitable for high-power applications due to its easy integration into interleaved converters. This paper discusses the operation of the converter, presents some design guidelines, and provides the results of an experiment with a 100 kHz and 1 kW prototype. A peak efficiency of 97.8% is recorded.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권2호
• /
• pp.114-122
• /
• 2004

This paper presents a novel single-stage active-clamp type high frequency resonant inverter. The proposed topology is integrated full-bridge boost rectifier as power factor corrector and active-clamp type high frequency resonant inverter into a single-stage. The input stage of the full-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. By adding additional active-clamp circuit to conventional class-E high frequency resonant inverter, main switch of inverter part operates not only at Zero-Voltage-Switching mode but also reduces the switching voltage stress of main switch. Simulation results have demonstrated the feasibility of the proposed high frequency resonant inverter. Characteristics values based on characteristics estimation through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in the fields of induction heating applications, fluorescent lamp and DC-DC converter etc.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.193-197
• /
• 2001

This paper presents a novel circuit topology of the double two-switch forward type high frequency transformer linked soft-switching PWM DC-DC power converter with tapped inductor filters that can operate under a condition of the low peak voltage stress across the power semiconductor devices and lowered peak current stress through the transformer for some high power applications. This circuit topology of an interleaved two-switch forward soft-switching power converter is proposed in the order to minimize an idle circulating current due to the tapped inductor filter without of any additional active auxiliary resonant-assisted snubber circuits, such as active resonant DC link snubbers and AC link snubbers, active resonant commutation leg link snubbers. The unique advantages of this power converter are less power circuit components and power semiconductor devices, constant frequency PWM scheme, cost effective configuration and wider soft-switching PWM operation range under PWM power regulations load variations. The practical effectiveness of the proposed soft-switching converter circuit topology is tested by simulations and is proved by experimental results received from the 500W-100kHz breadboard setup.

• 전자공학회논문지
• /
• 제53권2호
• /
• pp.36-44
• /
• 2016

본 논문에서는 $0.18{\mu}m$ CMOS 공정을 이용하여 WBAN(Wireless Body Area Network)용 IR-UWB(Impulse Radio Ultra Wide Band) RF 송수신기를 제안한다. 설계된 송수신기는 3-5GHz UWB low band를 지원하며 OOK(On-Off Keying) 변조 방식을 사용한다. 수신기는 복잡도와 소모 전력을 줄이기 위해서 비동기식 에너지 검출 방식을 사용하였다. 원하지 않는 잡음을 제거하고 감도를 개선하기 위하여 RF active notch filter가 내장되어 있다. VCO 기반의 수신기는 switch mechanism을 사용하였다. 사용된 switch mechanism은 소모 전력을 줄이고 VCO leakage를 최소화 할 수 있다. 또한, 중심주파수가 변해도 항상 동일한 spectrum mask를 가진다. 측정된 수신기의 감도는 3.5 GHz의 중심주파수에서 1.579 Mbps의 전송 속도를 가질 때 -84.1 dBm을 가진다. 송신기와 수신기는 각각 0.3 nJ/bit, 41 mW의 소모 전력을 사용한다.

• 한국정보통신학회논문지
• /
• 제20권12호
• /
• pp.2417-2424
• /
• 2016

항공기용 능동위상배열레이다와 같이 한정된 플랫폼에 장착되는 레이다에 사용하는 부품은 소형/경량화 특성이 매우 중요하다. 또한 최근의 능동위상배열레이다는 목표물의 탐지/추적이 가능한 다목적 레이다로 사용하기 위해 수천 개의 송수신모듈이 안테나의 배열형태로 개발되며, 여기에 적용하기 위한 송수신모듈 크기와 무게는 전체 레이다를 설계하는데 중요한 요소이다. 본 논문에서는 국산화 개발된 10W급 RF MEMS 스위치를 이용하여 소형 송수신 모듈을 개발하였고, 기존에 순환기(Circulator)를 사용한 것보다 회로 면적을 약 86.5% 수준으로 줄였다. 개발된 송수신모듈은 주요 전기적 요구 성능을 만족했을 뿐만 아니라, MIL-STD의 환경시험을 통과하여 군수 부품으로 적합함을 확인하였다. 송수신모듈에 적용된 MEMS 스위치는 적응형 수신기 (Adaptive Tunable Receiver), 재구성 가능한 스마트 능동위상배열안테나(Reconfigurable smart active antenna), 광대역 빔조향 안테나 등에도 적용할 수 있다.

• 한국항행학회논문지
• /
• 제15권4호
• /
• pp.596-601
• /
• 2011

본 논문에서는 간단한 회로구조와 높은 효율을 갖는 스위칭 방식의 E급 주파수 체배기에 대한 연구를 수행하였다. 주파수 체배는 능동소자의 비선형성에 의해 발생하는데 본 논문에서는 FET 능동소자를 간단한 스위치 및 기생소자 성분 모델로 근사하여 특성을 해석하고자 하였다. FET를 입력에 의해 동작하는 스위치 및 기생소자로 모델링하고 E급 주파수 체배기의 정합소자 값을 유도하였다. ADS시뮬레이터를 이용하여 출력 전압과 전류 파형 및 효율을 시뮬레이션하고 기생성분에 따른 변화를 연구하였다. 기생 커패시턴스, 저항, 인덕턴스에 의한 영향을 시뮬레이션하였으며 입력주파수 2.9GHz, 바이어스전압 2V일 때, 출력주파수 5.8GHz에서 기생커패시턴스가 0pF에서 1pF으로 변화함에 따라 드레인효율은 98%에서 28%로 감소하여 기생커패시턴스 CP가 FET의 기생 성분 중 가장 큰 영향을 끼친 것을 확인했다.