• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.217-217
• /
• 2000

A decentralized robust EA(eigensoucture assignment) controller is designed for an active suspension system of a vehicle based on a full car model with 7-degree of freedom. Using overlapping decomposition, the full car model is decentralized by two half car models. For each half car model, a robust eigenstructure assignment controller can be obtained by using optimization approach. The performance of the decentralized robust EA controller is compared with that of a conventional centralized EA controller through computer simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2126-2128
• /
• 2002

This paper presents the fuzzy PID controller for active vibration control systems. Simulation result are represented to demonstrate the efficacy of control design approach and utilization of electromagnets as actuators in active structural damping.

• The Journal of the Acoustical Society of Korea
• /
• 제24권3E호
• /
• pp.77-86
• /
• 2005

This paper shows one and two dimensional active linear modeling of cochlear biomechanics using Hspice. The advantage of the Hspice modeling is that the cochlear biomechanics may be implemented into an analog Ie chip. This paper explains in detail how to transform the physical cochlear biomechanics to the electrical circuit model and how to represent the circuit in Hspice code. There are some circuit design rules to make the Hspice code to be executed properly.

• 대한전기학회논문지
• /
• 제36권2호
• /
• pp.140-147
• /
• 1987

In this paper, seven-order elliptic low-pass passive network is synthesized by using doublyterminated ladder network is directly transformed into the active network which has the advantage of low sensitivity and can be realized conveniently. The circuit simulation results of passive network and active network synthesized with FDNR and Leap-frog technique are compared, and it is proved that the two rest work has the same characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2879-2881
• /
• 1999

This paper presents the adaptive Active Noise Control(ANC) system using the Neuro-Fuzzy controller. In general, the character of noise is time-varing and nonlinear Thus controller must have the adaptivness so that applied in Active Noise Control system to cancel the noise. This paper propose the Neuro-Fuzzy controller trained with back-propagation teaming algorithm to optimize the parameters of controller The objects of this paper are cancel the noise, extract the original(speech) signal polluted by noise and design the Neuro-Fuzzy controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1066-1068
• /
• 1996

This paper concerns about the active noise canceller via filtered-X LMS algorithm. There are various kinds of algorithms to implement a active noise canceller. Traditional LMS algorithms are not enough to implement a sharp noise cancellation characteristics. We simulates a filtered-X LMS algorithm and implements an algorithm to the TMS320C5x DSP processor and shows that result.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.262-267
• /
• 2000

The flexural vibration of aluminum beams with active and passive constrained-layer damping has been investigated experimentally to design structure with maximum possible damping capacity. Piezoelectric film is used as sensor and piezoceramic as actuator for negative velocity feedback control. This paper shows the effectiveness of active constrained-layer damping treatment through experiment, and we have carried out an experiment to study effect of beam thickness.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.70-81
• /
• 2020

Plastics that we use and simply throw away have a life span of about 500 years and barely decompose. The practice of producing and using common plastics needs to be challenged. Until now, they have been useful in the industrial structure of mass production, but it can be said that there is a lack of research into new materials to introduce and apply in terms of material recycling. As a result of this, we have come to the uncomfortable realization of the fact that we cannot incinerate or reuse these precious resources indiscriminately. No matter how well-designed a product is, it has a competitive advantage if production and consumption activities, waste, collection, sorting and treatment are considered in terms of a continuous cycle, and in this respect, Extended Producer Responsibility (EPR) can help. We are implementing the EPR system, and active industrialization in the field of recycling is required, which is also a challenge for producers to participate actively in recycling and seek to save and recycle resources in design and manufacturing. Against this backdrop, We would like to examine the possibilities, through various studies and developments on product design of recyclable materials, which is being conducted mainly in Europe. In particular, we would like to examine the methods, and value of solving environmental problems and the active efforts to achieve this in the design world, and in particular the case of product design using recycled plastics.

• 한국지반공학회논문집
• /
• 제15권1호
• /
• pp.15-29
• /
• 1999

본 연구에서는 GRS-RW 공법의 전면부벽체 배면으로부터 다양한 거리만큼 이격되어 등분포상 재하중이 작용하는 경우, 이러한 인접상재하중의 영향을 고려한 횡토압 예측방법을 한계평형해석에 의해 제시하였으며, GRS-RW 공법의 설계시 참고할 수 있는 예비설계(preliminary design)용 설계 도표를 제시하였다. 제시된 토압 합력의 예측방법은, 전면부벽체 배면으로부터 상재하중이 작용하는 지점까지의 수평거리를 고려할 수 있도록 하였으며, 지진하중 작용시 전면부벽체 및 뒷채움 자중에 의한 수평.연직관성력의 영향을 고려하였다. 아울러. 본 연구제시 해석법은, 점성토뒷채움의 경우에 흔히 적용되는 복합지오텍스타일 보강토공법의 해석시에 추후 적용 가능하도록 점착력이 있는 뒷채움(c-$\phi$ soil)에서 발생 가능한 인장균열의 영향을 고려할 수 있도록 하였다. 본 연구제시 해석방법의 효율성 및 적합성 등을 확인하기 위한 다양한 분석결과, 상재하중 이격거리비가 약 0.60~0.70 이상인 경우에는, 특히 상재하중의 크기 및 설계수평진도가 증가할수록, 또는 보강재의 연직간격이 0.3, 0.4m로 비교적 작은 경우에는, Jarquio의 수정 Boussinesq방정식을 이용한 토압 계산방식의 적용시 불안전측의 설계가 될 수 있는 것으로 나타났다. 본 연구에서 제시된 해석방법은, 전면부벽체의 경사가 연직인 경우로 한정하였다.

• 대한전자공학회논문지SD
• /
• 제45권6호
• /
• pp.89-95
• /
• 2008

본 논문에서는 필터방식 얼굴검출 하드웨어를 저전력 설계하고 그에 따른 전력 소모량을 분석하였다. 얼굴검출 하드웨어는 입력되는 영상에서 얼굴의 위치를 검출하며 내부적으로 6개 모듈과 11개의 모듈 간 버퍼가 삽입되어 각 모듈이 순환 연산한다. 따라서 저전력 설계를 위해 SLEEP 모드와 ACTIVE 모드를 적용하였고, 해당 하드웨어에 모듈별 그리고 레지스터별 클럭게이팅(Clock Gating) 기술을 적용하였다. 추가적으로 모듈간 버퍼는 메모리 파티션을 통해 메모리에서 소비하는 전력양을 줄였으며 게이트 레벨에서도 저전력 설계 기술(Gate level power optimization)을 적용하였다. 이는 삼성 0.18um 공정의 STD130 라이브러리를 사용하여 Synopsis(사)의 Power-Compiler를 통해 구현되었으며 동사의 Prime-Power에 의해 소비 전력량을 측정하였다. 그 결과 저전력 설계 기술을 적용하기 전과 비교하여 ACTIVE 모드일 경우 약 68%의 전력 소모를 줄였다.