• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2006

Purpose: The purpose of this study was to evaluate the efficacy and substitute possibility of a newly developed flowable composite resins as a luting cement for translucent fiber post. Material & Method: Two kinds of 12 mm translucent fiber Post (D.T. Light-Post (Bisco, USA) and FRC Postec (Ivoclar vivadent, Liechtenstein) was inserted into the teflon mold (7 mm diameter, 9 mm long) and Filtek-Flow (3M ESPE. USA), a light activated flowable composite resin, was polymerized for 60 seconds through the post. Also, the post was cut from the tip to 9 mm, 6 mm, 3 mm, and Filtek-Flow was light cured according to each length. For comparison, 60 seconds light-cured and 24 hours self-cured two dual cured resin cement (Duo-cement (Bisco, USA) and 2 Panavia-F (Kuraray, Japan)) samples were prepared as control group. Also cavities (1 mm in width, 1 mm in depth and 12 mm in length) were prepared using acrylic plate and aluminum bar, and flowable composite resin was flied and light cured by the diffused light from the fiber post's side wall. The degree of polymerization was measured according to the distance from curing light using Vickers' hardness test. Result: Within the limitation of this study, the following conclusions were drawn: 1. Vickers' hardness of light cured dual cured resin cement and flowable composite resin decreased from Panavia-F, Filtek-Flow and Duo-cement accordingly (p<0.05). In the dual curing resin cement, light curing performed group showed higher surface hardness value than self cured only group (p<0.05). 2. Surface hardness ratio (light cured through fiber post /directly light cured) of D.T. Light-Post using Filtek-Flow showed about 70% in the 6 mm deep and about 50% in the 12 mm deep FRC Postec showed only 40% of surface hardness ratio. 3. Surface hardness ratio by diffused light from the post's side wall showed about 50% at 6 mm and 9 mm deep, and about 40% at 12 mm deep in D.T. Light-Post. However, FRC Postec showed about 40% at 6 mm deep, and almost no polymerization in 9 mm and 12 mm deep.

• Journal of Life Science
• /
• v.24 no.9
• /
• pp.973-980
• /
• 2014

This study was conducted to explore new nutraceutical resources from the plant kingdom possessing biological activities. To fulfill this purpose, the anti-oxidative and anti-inflammatory activities of Decaisnea insignis ethanol extract (DIEE) were evaluated. First, DIEE possessed potent scavenging activity against 1,1-diphenyl-2-picryl hydrazyl (DPPH), similar to ascorbic acid used as a positive control. Moreover, DIEE inhibited lipopolysaccharide (LPS)- and hydrogen peroxide ($H_2O_2$)-induced reactive oxygen species (ROS) in RAW 264.7 cells. Furthermore, DIEE induced the expression of an anti-oxidative enzyme, heme oxygenase 1 (HO-1), and its upstream transcription factor, nuclear factor-E2-related factor 2 (Nrf2), in a dose-dependent manner. The modulation of the HO-1 and Nrf2 expressions might be regulated by mitogen-activated protein kinases (MAPKs) and their upstream signaling pathways. On the other hand, DIEE suppressed LPS-induced nitric oxide (NO) formation without cytotoxicity. The inhibition of the NO formation was the result of the downregulation of inducible NO synthase (iNOS) by DIEE. The suppression of NO and iNOS by DIEE might be modulated by their upstream transcription factors, nuclear factor ${\kappa}B$ ($NF-{\kappa}B$), and activator protein 1 (AP-1) pathways. Taken together, these results provide important new insights that D. insignis possesses anti-oxidative and anti-inflammatory activities. Therefore, it might be utilized as a promising material in the field of nutraceuticals.

• Journal of Chest Surgery
• /
• v.44 no.1
• /
• pp.9-17
• /
• 2011

Background: A peripheral extracorporeal membrane oxygenator (p-ECMO) has been developed to support patients who are dying due to a serious cardiopulmonary condition. This analysis was planned to define the clinical situation in which the patient benefits most from a p-ECMO. Material and Methods: Between June 2007 and Aug 2009, a total of 41 adult patients used the p-ECMO. There were 23 males and 18 females (mean age $54.4{\pm}15.1$ years). All patients had very unstable vital signs with hypoxia and complex cardiac problems. We divided the patients into 4 groups. In the first group, a p-ECMO was used as a bridge to cardiac operation. In the second group, patients did not have the opportunity to undergo any cardiac procedures; nevertheless, they were treated with a p-ECMO. In the third group, patients mostly had difficulty in weaning from CPB (cardiopulmonary bypass) after cardiac operation. The fourth group suffered from many complications, such as pneumonia, bleeding, infections, and LV dysfunction with underlying cardiac problems. All cannulations were performed by the Seldinger technique or cutting down the femoral vessel. A long venous cannula of $DLP^{(R)}$ (Medtronic Inc, Minneapolis, MN) or $RMI^{(R)}$ (Edwards Lifesciences LLC, Irvine, CA) was used together with a 17~21 Fr arterial cannula and a 21 Fr venous cannula. As a bypass pump, a Capiox emergency bypass system ($EBS^{(R)}$; Terumo, Tokyo, Japan) was used. We attempted to maintain a flow rate of $2.4{\sim}3.0\;L/min/m^2$ and an activated clotting time (ACT) of around 180 seconds. Results: Nine patients survived by the use of the p-ECMO. Ten patients were weaned from a p-ECMO but they did not survive, and the remainder had no chance to be weaned from the p-ECMO. The best clinical situation to apply the p-ECMO was to use it as a bridge to cardiac operation and for weaning from CPB after cardiac operation. Conclusion: Various clinical results were derived by p-ECMO according to the clinical situation. For the best results, early adoption of the p-ECMO for anatomical correction appears important.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.630-635
• /
• 2014

Pine nut oil (PNO) is well known to impart beneficial effects in overweight individuals, but the mechanisms underlying PNO-mediated weight loss remain unclear. To investigate how PNO promotes weight loss, its composition was determined by gas chromatography coupled with mass spectrometry (GC-MS). In addition, the effects of PNO on cytotoxicity, lipid accumulation, expression of lipid metabolism-related biomarkers, and leptin secretion were assessed in 3T3-L1 cells. GC-MS analyses revealed that PNO contains several components, including linoleic acid, oleic acid, palmitic acid, and stearic acid. Moreover, PNO did not have a cytotoxic effect on 3T3-L1 cells. However, it inhibited the expression of peroxisome proliferator-activated receptor (PPAR) and adipocyte protein 2 (aP2). Finally, PNO significantly increased leptin secretion in a dose-dependent manner. Taken together, these results support the notion that PNO is useful for weight management in overweight individuals.

• Clean Technology
• /
• v.27 no.4
• /
• pp.325-331
• /
• 2021

In this study, bio-carbons were produced by activation process from unused biomass (Grade 3 wood pellet and spent coffee grounds) to determine the removal performance of formaldehyde and acetaldehyde. The activation experiments were conducted in a fixed bed reactor using CO₂ as an activation agent. The temperature of the activation reactor and input of CO₂ were 900 ℃ and 1 L min^-1 for all the experiments. The maximum BET surface area of about 788 m² g^-1 was obtained for bio-carbon produced from Grade 1 wood pellet, whereas about 544 m² g^-1 was achieved with bio-carbon produced from spent coffee grounds. In all the experiments, the bio-carbons produced were mainly found to have micro-porous nature. A lower ash amount in raw material was favored for the high surface area of bio-carbons. In the removal test of formaldehyde and acetaldehyde, the bio-carbon produced from spent coffee grounds showed excellent adsorption performance compared with woody biomass (Grade 1 wood pellet and Grade 3 wood pellet). In addition, the comparative experiment of commercial impregnated activated carbon and bio-carbon produced from spent coffee grounds was conducted. In terms of formaldehyde removal performance, the commercial impregnated bio-carbon was excellent, while bio-carbon produced from spent coffee grounds was excellent in acetaldehyde removal.

• Ecology and Resilient Infrastructure
• /
• v.8 no.3
• /
• pp.135-142
• /
• 2021

Biopolymers have been known as eco-friendly soil strengthening materials and studied to apply levees. However, the effect of biopolymer on vegetation is not fully understood. In this study, we analyzed the root growth of Camelina sativa L. (Camelina) when the xanthan gum was amended to soil in Aluminum (Al) stress conditions. Amendment of 0.05% xanthan gum increased root growth of Camelina under Al stress conditions. Under the Al stress condition, expression of aluminum activate malate transporter 1 (ALMT1) gene of Camelina root was induced but showed a lower level of expression in xanthan gum amended soil than non-amended soil. Additionally, the binding capacity of xanthan gum with Al ions in the solution was confirmed. Using morin staining and ICP-OES analysis, the Al content of the roots in the xanthan gum soil was lower than in the non-xanthan gum soil. These results suggest that xanthan gum amended soils may reduce the detrimental effects of Al on the roots and positively affect the growth of plants. Therefore, xanthan gum is not only an eco-friendly construction material but also can protect the roots in the disadvantageous environment of the plant.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.213-218
• /
• 2021

In this study, Kombucha, a fermented drink by adding beneficial bacteria to green tea or black tea with sugar, was classified using column chromatography, and the presence or absence of quercetin glycoside, a type of flavonoids, was confirmed through TLC. In addition, the anti-pollution effect of protecting and improving the skin from pollution was confirmed using the fraction. Keratinocytes were treated with K-QG to confirm the cell viability, showing a survival rate of 90% or more up to a concentration of 100 ㎍/mL, and the cell viability by benzo[e]pyrene and fine dust stimulation to see the anti-pollution effect was measured. At 100 ㎍/mL, the improvement rates were about 68.79% and 50.68%, respectively. In addition, as a result of confirming the expression of AhR activated by benzo[a]pyrene through Western blot, it showed an inhibition rate of about 31.08% at 100 ㎍/mL compared to the control group. Through the results of this study, K-QG is thought to be valuable as an anti-pollution functional material, protecting and improving skin irritated from benzopyrene and fine dust.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.359-366
• /
• 2010

Large-scale preparation steps of antithrombotic materials from wood ear mushroom (Auricularia auricular-judae) were established as follows. Grounded dry wood ear mushroom was extracted with 75% ethanol and its precipitate was extracted with $76^{\circ}C$ water for 2 hr followed by filter pressing. The filtrate was then concentrated by vacuum and extracted with 80% ethanol, and the resulting precipitate was then freeze-dried. The formula of the product was determined using consumer susceptibility tests as follows; mushroom extract 90.5%, high fructose corn syrup 2.0%, $\beta$-cyclodextrin 1.5%, fructo-oligosaccharide 2.0%, pear puree 4.0%. When the packed products were stored at 25, 37, or $45^{\circ}C$ for 8 weeks, there were no noticeable changes in water activity, moisture content, pH, and acidity. The viable cell number of total bacteria was slightly increased during the storage period at 25 and $37^{\circ}C$, The total bacteria were not detected in the product when stored at $45^{\circ}C$. When the product was injected intravenously into rat at the level of 1,000 mg/kg, antithrombotic activities such as activated partial thromboplastin time, thrombin time, prothrombin time, and FIB were increased when compared with the control group. When the product was administrated orally into rat at the level of 500 mg/kg, it showed the same antiplatelet activity to aspirin.

• Journal of Life Science
• /
• v.29 no.4
• /
• pp.447-454
• /
• 2019

Fat accumulation in adipocytes occurs through the process of adipogenesis in which preadipocytes differentiate into adipocytes. Obesity is a metabolic disorder caused by excessive accumulation of fat in the body, which increases the incidence of cardiovascular diseases, hypertension, type 2 diabetes, hyperlipidemia, and various cancers. Recently, inhibition of adipocyte differentiation was shown to be a potential antiobesity strategy. In this study, the inhibitory effect of dichloromethane fractions from Illicium verum Hooker fil. water extract on the differentiation of 3T3-L1 preadipocytes to adipocytes was investigated. Dichloromethane fractions from I. verum Hooker fil. significantly inhibited adipocyte differentiation when applied during the adipocyte differentiation process, as assessed by measuring fat accumulation using Oil-red O staining. In addition, dichloromethane fractions from I. verum Hooker fil. reduced important adipogenic transcription factors, such as CCAAT/enhancer binding protein ${\alpha}$ ($C/EBP{\alpha}$), $C/EBP{\beta}$, and peroxisome proliferator activated receptor ${\gamma}$ ($PPAR{\gamma}$). The expression of FAS and LPL, which are terminal differentiation markers of mature adipocytes, was also reduced in the 3T3-L1 adipocytes treated with dichloromethane fractions from I. verum Hooker fil. In addition, the treatment significantly inhibited mitotic clonal expansion, which is essential for adipocyte differentiation, by arresting the G1 phase of the cell cycle. Taken together, these results suggest that dichloromethane fractions from I. verum Hooker fil. may be a natural material with antiobesity effects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.938-943
• /
• 2018

Thin nano-sized fibres were prepared by an electrospinning method. The spinning appratus consisted of pump for polymer injection, nozzle and nozzle rotus, and an aluminum plate collected the polymer fibers. Its surface was chemically modified for selective improved adsorption of carbon monoxide at indoor level. The chemical activation enabled to form the fibres 250-350 nm in thickness with pore sizes distributed between 0.6 and 0.7 nm and an average specific surface area of $569m^2/g$. The adsorption capacities of pure (100%) and indoor (0.3%) $CO_2$, of which level frequently appears, at the ambient condition were improved from 1.08 and 0.013 to 2.2 and 0.144 mmol/g, respectively. It was found that the adsorption amount of $CO_2$ adsorbed by the chemically activated carbon nanofiber prepared through chemical activation would vary depending on the ratio of specific surface area and micropores. In particular, chemical interaction between adsorbent surface and gas molecules could enhance the selective capture of weak acidic $CO_2$.