• 한국콘텐츠학회논문지
• /
• 제13권5호
• /
• pp.37-47
• /
• 2013

본 연구의 목적은 소셜 게임플레이에 대한 행동패턴을 분석하여 과업의 상호의존적인 게임플레이 법칙을 발견하는 것이다. 이를 위해 게임플레이와 관련된 선행연구를 고찰하고 과업의 상호의존적인 게임플레이에 적합한 게임을 선정하였다. 본 실험은 5명이 한 팀이 되는 파티를 구성하여 게임플레이를 실시하고 동시조서를 실시하며 플레이어들의 행동과 구두보고에 대한 비디오/오디오 데이터를 수집 하였다. 데이터 분석을 위해 비디오 관찰과 구두조서를 분석하고 결합 시퀀스 모형 과제 분석법을 중심으로 객관적인 코딩스킴을 개발하고 이를 토대로 플레이어의 행동을 분석하였다. 그 결과 4가지 패턴과 4가지 변형된 패턴 총 8가지 행동패턴이 발견되었다. 본 연구를 통해 5명의 게임플레이에 대한 통합형 행동그래프를 작성하여 협업이 적절한 지점과 잦은 실수와 실패가 발생한 지점을 파악 할 수 있었다. 이러한 소셜 게임플레이 행동그래프는 게임의 레벨 디자인과 밸런스 디자인이 적절한지를 평가하는 중요한 실무 디자인 지침이 될 것으로 기대된다.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3878-3884
• /
• 1975

This study was carried out to develop the throw-in type thresher with its size as small as possible. Developing the smallest possible size of the throw-in type thresher has been very important to increase mobility and to reduce the machine price. The thresher that developed for this purpose was tested as to threshing and separation performance for the samples collected in eight catch boxes under the concave while threshing. The amount of grain collected in each compartments was measured and the threshing and separating pattern along the total span of the threshing drum was determined. The performance of separating and threshing units of the test thresher and threshing loss was evaluated by use of the developed grain separating apparatus and the method for measuring the grain separating performance of threshers. The results are summarized as follows; 1. The unthreshed grain (drum losses) and semi-threshed grain did not appeared at all throughout the treatments. 2. When threshed by making use of the developed throw-in type thresher, the threshing grain loss at about 25 per cent grain moisture was about one-half when threshed at about 18 per cent grain moisture. 3. And its grain separating loss in higher feed rate was decreased in comparison with that of lower feed rate. These results suggests that the throw-in type thresher may be suitable for wet threshing and for higher feed rate of threshing. 4. Above 60 per cent of total grain passing through concave fell through the screen within a scant 30 cm from the feeding inlet. This threshing pattern may suggest that major threshing action may be finished before about one third of cylinder length. The required separating load extended over the whole drum span is so defferent that separating elements should be redesigned so as to accomodate this variable pattern of separation load. 5. It was apparent from the experiment that the length of the threshing drum of the throw-in type thresher could be reduced from 1285mm to about 1050mm without increasing grain separation loss greatly.

• 한국의류학회지
• /
• 제32권3호
• /
• pp.395-407
• /
• 2008

As global interest in clothing spreads over the smart clothing which arouses high added-value in the apparel industry, this study is to develop a smart jacket with an electrically-vibrating device maintaining excellent appearance and comfort. The vibrating device has a massage function that could relieve muscle pain near shoulders and neck. The purposes of this research are to develop jacket pattern for men in their thirties considering body shapes and fashion trend, to develop a wearable device that is composed of motor and controller and integrate it into a jacket, and to assess the external appearance and functional satisfaction of the smart jacket through the wearing test. The results are as follows: 1. In order to develope an appropriate jacket pattern for men in their thirties, several patterns were assessed for their fitting comfort. The final pattern was completed after making alterations some parts, and showed high satisfaction as 3.6(on a five-point scale) in all categories. 2. A vibrating device was developed by connecting motor, controller, battery and switch. Developing this device, focus was maximizing the strength of motor and minimizing the heat generated from motor and controller. Snaps were placed between inner and outer cloth of jacket so that the vibrating device could be easily attachable and detachable. The motor was located around Trapezius where muscles often get stiff. A switch was designed to be used in selecting the modes of Strong, Weak, and Cross Tapping. 3. The wearing test was conducted to examine outer appearance, comfort for motion, and functionality of the smart jacket. The results of assessing outer appearance showed that the location for attaching the vibrating device was not noticeable but looked natural, and there is almost no change in outer appearance when the vibrating device operates. The result of assessing comfort of action revealed that wearer's satisfaction was high in all categories about activity, wearer's comfort, etc. The result also showed that wear's satisfaction for effects of vibrating massage, easiness in using the device, heat generation was not less than 3.5 in all categories except a category about noise.

• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.263-271
• /
• 2016

소프트웨어 요구사항 분석은 성공적인 소프트웨어 프로젝트를 위해 필수적 요소이다. 특히 불완전한 요구사항은 소프트웨어 프로젝트 실패의 가장 큰 원인으로 꼽힌다. 불완전한 요구사항은 소프트웨어 개발 시 개발자에게 이해 부족을 야기할 뿐 아니라, 소프트웨어 검증 시 에도 모호한 기준을 제공함으로써, 개발 후반부에 납기일 연기 및 비용 증가의 원인이 된다. 요구사항 패턴은 이러한 문제를 극복하는데 도움을 줄 수 있다. 요구사항 패턴은 요구사항 작성과 검토 시 참조모델이 될 뿐 아니라, 검증 기준이 될 수 있으며, 작성자가 누락한 부분을 보완해 줄 수 있다. 이와 더불어 요구사항 작성의 경험이 적은 작성자는 요구사항 패턴을 통해 더 쉽고, 빠르고 정확하게 요구사항을 작성할 수 있다. 본 논문에서는 다양한 요구사항의 시나리오를 통해 공통된 요구사항 시나리오를 추출하는 기법을 제안한다. 그리고 제안한 기법의 가시성 검증을 위해 여덟 개의 프로젝트에서 추출한 83개의 소프트웨어 시나리오를 통해 54개의 시나리오 패턴을 추출하고 이 패턴을 이용하여 누락된 행위를 찾는 과정을 사례연구를 통해 보여준다.

• Composites Research
• /
• 제33권1호
• /
• pp.13-18
• /
• 2020

기존 소방구조용 작업차에서 문제가 되고 있는 협소도로 진입의 어려움 및 구조를 위한 신속한 작업 전개 한계성을 극복하기 위한 목적으로 소형 구조작업차 연구가 진행되고 있으며 이에 따른 경량화 연구를 진행하였다. 본 연구에서는 소방 구조 작업차 5번 붐은 288 mm(W) × 299 mm(D) × 3,691 mm(L)이며 이에 걸리는 최대 하중은 876 kg이고, Steel Boom의 Thickness는 3 mm이다. Steel (STRENX960)을 CFRP 복합재로 변경하여 제작하기 위해 Carbon Fiber NCF (±45°, 2축)를 직조하고 이를 NCF Prepreg로 제작하였고 경량화와 강성, 강도를 극대화할 수 있는 최적설계 패턴을 제시하였다. 이 과정은 구조해석을 바탕으로 설계하였고, NCF Prepreg의 (±45°)가 비틀림에 미치는 영향을 확인했으며 적층패턴(b)로 최적설계 하였다. 기존 Steel Boom과 UD방향으로 적층한 CFRP Boom과 동등하거나 이상의 수준에 대한 적층패턴을 최적화하였고, 최종적으로 Steel 대비 약 49.6% 무게에 대한 경량화 효과를 확인하였다.

• 한국생활과학회지
• /
• 제6권2호
• /
• pp.121-131
• /
• 1997

This study was to design the clean room garment which fits for a body and adjusts well to the action. We examined the body's changes in action through a body measurment and made a sample of the clean room garment to which had adapted the body's changes in action and evaluated the function and the appearance compared with the existing the clean room garment. The followings were summery of the results : 1. Back intersyce breadth decreased, trunk length increased and the other parts were not change. At a posture of raising hands($M_3$) in comparison with an upright posture($M_0$). Back intersyce breadth, hip length and knee length increased and the other parts were a little change. At a bowing posture($M_2$) in comparison with an upright posture($M_0$). Back hip girth, knee length, hip length and leg length increased and the other parts were not change. At a working posture on a chair($M_1$) in comparison with an upright posture($M_0$). 2. The overall clean room garment was made increasing on the changes of part of a body through measuring and body measurement. 3. From the test of the function, it became known that the devised clean room garment was superior to the existing one in the parts of neck, shoulder, armpit and elbow at a working posture on a chair($M_1$), in the parts of neck, shoulder, and armpit at a bowing posture($M_2$), and the armpit at a posture of raising hands($M_3$). The appearance was better on the whole. 4. From the examination of photographs, the waist line of the devised clean room garment was not so much pulled up as that of the existing one on moving. And when sitting down on a chair, the waist line of the existing one was pulled down while that of the devised one had no change. As above, we investigated the actual conditions of wearing the clean room garment and measured the body's changes according the various actions. So we applied these results to the devised clean room garment but we couldn't research the clean mom effect of it owing to not obtaining the measuring instrument. The aspect of ergonomics liked the feeling of wearing and fitted to the action must be given consideration to the clean room garment, and simultaneously the dust-resistant effect must be taken into consideration in order to improve the quality of the goods. Therefore, we think it should be continued the research on the dust-resistant effect, material, washing method, quality control, and size along with the aspect of ergonomics.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권1호
• /
• pp.30-43
• /
• 2003

반폐쇄성인 북서태평양 해역은 지형, 해류순환, 생태학적 관점에서 하나의 큰 시스템으로 간주되어 관리되어야 한다 현재 북서태평양권에서 진행되고 있는 해양환경 관련 다자간 협력 활동은 WESTPAC, PEMSEA, PICES, NOWPAP 등 다양하다. 본 논문에서는 특히 유엔환경계획의 주관하에 한ㆍ중ㆍ일ㆍ러가 지난 1994년부터 채택하여 수행중인 북서태평양보전실천계획(NOWPAP)사업을 중심으로 하여 북서태평양에서 진행되고 있는 지역협력 활동의 제반현황과 문제점을 살펴보고 이의 가능한 해결책을 제시하고자 하였다. 주요 제안으로는 (1) 북서태평양 인접국들은 해양환경 관련 국제협력 활동에 있어서 법적 구속력 있는 지역 차원의 협약의 중요성을 인식하고 실질적인 지역 협력활동을 수행함에 있어 큰 우산으로 작용할 수 있는 해양환경 관련 협약을 개발하여야 하며, 이에 (2) 현재의 제반 상황을 고려하여 현 단계에서는 국가의 영해나 관할권 등의 이슈를 침해하지 않는 느슨한 형태의 협약 개발을 시도할 필요가 있다. 아울러 (3) 지역내 다양한 정치 사회적 문제로 인해 환경분야의 협력사업이 종종 중단되거나 간섭받지 않도록 하기 위하여 유엔환경계획이나 다른 국제기구로부터의 지도력이 계속 발휘되어야 한다 (4) 재정적 및 제도적 기반을 계속 강화시켜야 하며, (5) 또한 북서태평양에서 연안 및 해양환경에의 위해 요소에 대응하기 위한 지역내 다자간 협력활동을 지속적으로 수행하여야 한다

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.983-989
• /
• 2007

Most of life thing including human being have tendency of reaction with inherently their own pattern against environmental change caused by such as light, sound, smell etc. Especially, a sense of direction often works as a very important factor in such reaction. Actually, human or animal lift that can react instantly to a stimulus determine their action with a sense of direction to a stimulant. In this paper, we try to propose how to give a sense of direction to a robot using sound being representative stimulant, and tracking sensors being able to detect the direction of such sound source. We also try to propose how to determine the relative directions among devices or robots using the digital compass and the RSSI on wireless network.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.433-439
• /
• 2005

This paper describes a reinforced concrete crack model, which utilizes a strain decomposition technique. The strain decomposition technique enables the explicit inclusion of physical behavior across the cracked concrete surface such as aggregate interlock and dowel action rather than intuitively defining the shear retention factor. The proposed concrete crack model is integrated into the commercial finite element software ABAQUS shell elements through a user-supplied material subroutine. The FE results have been compared to experimental results reported by other researchers. The proposed bridge FE model is capable of predicting the initial cracking load level, the ultimate load capacity, and the crack pattern with good accuracy.

• Journal of Acupuncture Research
• /
• 제19권4호
• /
• pp.132-139
• /
• 2002

This study was carried to identify whether acupuncture at several meridian points can affect the human anesthesia or not using the EEG mapping. We observe the change in the brain wave patterns obtained by electroencephalogram after acupuncture. 1. It is concluded that the pattern of resting computerized EEG map in intact human is normal and acupunctuation at determined meridian points induced lesser narrow field of alpha activity, more extensive field of ${\delta}$, ${\theta}$ activity, father resulted in marked shift to cerebrofrontal dominance in field of ${\delta}$, ${\theta}$ activity by t-SPM. 2. It seems likely that acupunctuation at experimental meridian points acts on slight anesthesia or hypnosis.